NavPod PP5100 Uncut PowerPod (Usable Face = 14"L X 7.625"H) (35.5cm W Boat Outfitting

Uncut PowerPod PP5100 (usable face = 14" L

The PowerPods for Sail are intended to be mounted on a flat surface Perhaps under the cubbyhole or the aft end of the cockpit table, in particular.on dual-wheel boats.

Structural Rigidity

Gen3 improvements now include grade-gauge acrylic-coated ABS material thicker which improves resistance and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal

All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the harshest offshore sailing conditions.more difficult and wet. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the NavPod in the future in order to service your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel

The NavPod uses all 316 stainless steel hardware provided with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security combined with a little bling!

Commitment to qualityé

We are committed to producing high quality waterproof enclosures for marine electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty.

Compared to rack installation, PowerPods for Power is a better choice . PowerPods have the advantage of a rotating base, which can provide a clean appearance for built-in installation.
PRODUCT ID: 63972
SKU: NVN-63972
CSKU: CWR-63972
REWRITE: 75083-navpod-pp5100-powerpod-uncut-usable-face
MPN: PP5100-C
br> UPC: 659988112702
ASIN: B082BB36WT
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP5100 PowerPod no cut (Usable Face = 14" L X 7.625" H) (35.5 cm W14" L> TYPE: Boat Equipment Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod PP5100 Uncut PowerPod (usable face = 14" L X 7.625" H) (35.5 cm L

NavPod PP5100 Uncut PowerPod (Usable Face = 14" L " L x 7.625" H) (35.5 cm W x 19.4 cm H) - Carbon Black which explode offshore. He demands the most from his boat and its electronics. It needs strong, sturdy support to protect vital electronic components from the harshest offshore navigation conditions. Rugged and secure, yet clean and attractive, PowerPods are better than rack mounting. Over 70 pre-cut PowerPods are available for all products from popular manufacturers. The 1.8" opening in the swivel tube provides plenty of room to pass through wires and connectors. PowerPods are positioned with a 20-degree tilt-back viewing angle.

PowerPods for Sail sont intended to be mounted on a flat surface. Perhaps under the cubbyhole or aft end of the cockpit table especially on twin wheel boats.

Structural RiGidity

Gen3 improvements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal

All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This joint offers the bestltheir protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poran Microcell polyurethane seal is now 50% thicker and is not subject to "retentive compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel

The NavPod uses all 316 stainless steel hardware provided with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we providetamper-resistant nickel-chrome-plated stainless steel screws for added security combined with a little bling!

Commitment to quality

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.

Frequently asked questions (FAQ) about NavPod PP5100 Uncut PowerPod (usable face = 14" W x 7.625" H) (35.5 cm L x 19 .4 cm H) - Carbon Black Who is the NavPod?
How to describe the NavPod PP5100 Uncut PowerPod (usable face = 14" L X 7.625"H) (14" W x 7.6" H) - Carbon Black?
Is it cut or uncut?
How to mount or what is the mounting style of the Uncut NavPod PP5100 PowerPod (Usable Face = 14" L What is the usable surface area of the product?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the Uncut NavPod PP5100 PowerPod (Usable Face = 14" L Compared to rack installation, PowerPods for Power constituteent a better choice. PowerPods have the advantage of having a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut? Uncut How to mount or what is the mounting style of the Uncut NavPod PP5100 PowerPod (Usable Face = 14" W X 7.625" H) (35.5 cm W x 19.4 cm H) - Carbon Black ? DashWhat is the size of the usable surface area of the product? 14" W .5cm L X 19.4cm H) - Carbon Blackfor only $365 at NVN Marine! Same day dispatch before 3pm. NavPod PP5100 Uncut PowerPod (Usable Face = 14" L X 7.625" H) (35.5cm W>

Boat outfitter | Display Media

Supplier:

NavPod

Cut/Uncut:

Uncut

Edit Style:

Printed

Usable side:

14"W x 7.625"H

NavPod PP5100 Uncut PowerPod (usable face = 14" L .4 cm H) - Carbon Black Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our return & refund policy here.