NavPod PP5066 Pre-cut PowerPod f/Furuno NavNet TZTouch2 12" screen Boat Outfitting

PP5066 Pre-Cut PowerPod for Furuno NavNet TZTouch2 12" Display

PP5060 Series, PowerPods for power are a better option than stand mounting. PowerPods provide a sleek look for a flush mount with the advantage of a swivel base.

The trunnion mount provided with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics. Most manufacturers do an excellent job of protecting the front of the screen from water intrusion with sealed rubber push buttons. expect you to mount it flush-mounted in the console or in a NavPod The PowerPod also protects plastic connectors and wires from deterioration caused by long-term UV exposure.

PowerPods. for sail are intended to be mounted on a flat surface, perhaps under thecubbyhole or aft of the cockpit table, especially on twin-wheel boats.

High Gloss Material

NavPods are made with custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The inner sealerne EPDM is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to be able to count on design engineersexperienced in-house professionals who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident that you will have years of trouble-free service and a long-lasting glossy finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice . PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industrial design. Designed to complement the latest prmarine electronic products. Double seal to guarantee watertightness. The outer silicone seal is complemented by an inner seal made of a memory polyurethane foam pad, which retains its shape and sealing ability for many years.
PRODUCT ID: 59311
SKU: NVN-59311
CSKU: CWR-59311
REWRITE: 70422-navpod-pp5066-powerpod-pre-cut-f-furuno-navnet-tztouch2
MPN: PP5066
UPC: 659988110401
ASIN: B01DYX3VEQ
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP5066 Pre-cut PowerPod f/Furuno NavNet TZTouch2 12" screen
NOM_EX: NAVPOD PP5066 PRE-CUT POWERPOD FOR FURUNO NAVNET TZTOUCH2 12"
PTITLE: NavPod PP5066 Pre-cut PowerPod for Furuno NavNet TZTouch2 12" screen
TYPE: Boat Equipment | Display Mounts
SUPPLIER: NavPod
ELECTRONICS> MARINE ELECTRONICS
Wireless
Title Amazon:
NavPod PP5066 Pre-Cut PowerPod f/Furuno NavNet TZTouch2 12" Screen
Wireless
Gtags:

GSpecs:

NavPod PP5066 Pre-Cut PowerPod for Furuno NavNet TZTouch2 12" Display Product Description PP5066 Pre-Cut PowerPod for Furuno NavNet TZTouch2 12" Display

PP5060 series, PowerPods for power are a better option than bracket mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

The PowerPsod for Sail are intended to be mounted on a flat surface. Perhaps under the dodger or aft of the cockpit table, especially on boats fitted with dual wheels.

The high gloss material

NavPods are made with custom co-extruded ABS material with acrylic cap. . We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. The improvementsGen3 ions include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service it.

Nickel-chrome plated screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all beginsthrough the design and development of tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for Maelectronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice . PowerPods have the advantage of having a rotating base, which can givea clean appearance for an integrated installation. The latest industrial design. Designed to complement the latest marine electronics products. Double seal to guarantee watertightness. The outer silicone seal is complemented by an inner seal made of a memory polyurethane foam pad, which retains its shape and sealing ability for many years.

Frequently Asked Questions (FAQ) about NavPod PP5066 Pre-Cut PowerPod f/Furuno NavNet TZTouch2 12" Display Who is NavPod?
How to do it Describe NavPod PP5066 PowerPod Pre-Cut f/Furuno NavNet TZTouch2 12" Display?
Is it cut or uncut?
How to mount or what is the mounting style of NavPod PP5066 PowerPod Pre-Cut f /Furuno NavNet TZTouch2 12" Display? Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive designhaving made the best built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP5066 PowerPod Pre-Cut f/Furuno NavNet TZTouch2 12" Display? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of a rotating base, which can provide a clean appearance for integrated installation The latest industrial design is designed to complement the latest marine electronics products to ensure double waterproof integrity. The outer silicone seal is complemented by an inner seal made of a foam pad. shape memory polyurethane, which retains its shape and sealing ability for many years Is cut.or uncut? CutHow to mount or what is the mounting style of NavPod PP5066 PowerPod Pre-Cut f/Furuno NavNet TZTouch2 12" Display? Dash

Save $122 when you purchase the 12" Display NavPod PP5066 Pre-Cut PowerPod f/Furuno NavNet TZTouch2 for only $427 at NVN Marine! Same day dispatch before 3 p.m. NavPod PP5066 Pre-Cut PowerPod f/Furuno NavNet TZTouch2 12" Display Technical Specifications

Type:	Boat Equipment \| Display Mounts
Supplier:	NavPod
Weight:	9.5 lbs
Cut/Uncut:	Cut
Edit Style:	Dash

NavPod PP5066 Pre-cut PowerPod f/Furuno NavNet TZTouch2 12" screen User reviewsNavPod PP5066 Pre-cut PowerPod f/Furuno NavNet TZTouch2 12" screen Shipping et return

Shipping weight:	9.5 lbs
Box sizes:	6.00 (h) x 10.00 (w) x 18.00 (w)
Cubic feet:	1080.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy and you can find our returns and refunds. Politics here.