NavPod PP5065 Pre-Cut PowerPod for Garmin GPSMAP 8012/8212 Boat Outfitting

PP5065 Pre-Cut PowerPod for Garmin GPSMAP 8012/8212

PowerPods for Power are a better option than bracket mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are intended to be mounted on a flat surface. Perhaps under the hood or at the rear of the cockpit table, inespecially on boats equipped with dual wheels.

The glossy material

NavPods are made with a custom ABS material coated with co-extruded acrylic. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject toto a "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting brackets.Software that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use prCAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We've redesigned and revamped all the popular NavPods. We looked at all the old products and selected the best design elements from each and incorporated them into each new Gen3 product.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all new NavPods Gen3.

Compared to rack installation, PowerPods for Power are a better choice . The PowerPods aret the advantage of having a rotating base, which can provide a streamlined appearance for a built-in installation. Very suitable for installation in...
PRODUCT ID: 59222
SKU: NVN-59222
CSKU: CWR-59222
REWRITE: 70333-navpod-pp5065-powerpod-pre-cut-f - garmin-gpsmap-8012-8212
MPN: PP5065
UPC: 659988107609
ASIN: B00YAZKNOO
WSKU: NAVPP5065
SSKU:
KSKU: NPDPP5065
GSKU:
MSKU:
LSKU:
NAME: NavPod PP5065 Pre-Cut PowerPod/Garmin GPSMAP 8012/8212
NAME_EX: NAVPOD PP5065 PRE-CUT POWERPOD FOR GARMIN 8012/8212
PTITLE: NavPod PP5065 Pre-Cut PowerPod cut out for/Garmin GPSMAP 8012/8212
TYPE: Boat Equipment | Display Media
SUPPLIER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod PP5065 PowerPod Pre-Cut f/Garmin GPSMAP 8012/ 8212

Gtags:

GSpecs:

NavPod PP5065 Pre-Cut PowerPod for Garmin GPSMAP 8012/8212 Product Description PP5065 Pre-Cut PowerPod for Garmin GPSMAP 8012/8212

PowerPods are a better option than mounting on support. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are intended to be moplaced on a flat surface. Perhaps under the dodger or aft of the cockpit table, particularly on twin wheel boats.

The high gloss material

NavPods are made with custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer seal with un Improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome plated nickel screws

We We use all stainless steel mounting hardware that comes with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We have the chance tohave experienced in-house design engineers using CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We've redesigned and revamped all the popular NavPods. We reviewed all the old products, selected the best design elements from each, and incorporated lesm into every new Gen3 product.

Our commitment to quality

We are committed to producing the best possible marine waterproof case. Electronic. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will honor our commitment by now offering a 10-year warranty on all new NavPods Gen3.

As installedation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. Very suitable for installation in...

Frequently Asked Questions (FAQ) About NavPod PP5065 Pre-Cut PowerPod for Garmin GPSMAP 8012/8212 Who is the NavPod?
How to describe NavPod PP5065 Pre-Cut PowerPod f/Garmin GPSMAP 8012/8212?
Is it cut or uncut?
How to mount or what is the mounting style of NavPod PP5065 Pre-Cut PowerPod for Garmin GPSMAP 8012/8212?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper evident clipsCables for added safety and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP5065 PowerPod Pre-Cut f/Garmin GPSMAP 8012/8212? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. Very suitable for installation in... Is it cut or uncut? Cut How to mount or what is the mounting style of the NavPod PP5065 PowerPod Pre-Cut f/Garmin GPSMAP 8012/8212? Dash

Save $101 when you purchase the NavPod PP5065 Pre-Cut PowerPod for Garmin GPSMAP 8012/8212 for only $448 at NVN Marine! Same day dispatch before 3 p.m. NavPod PP5065 Pre-Cut PowerPod for Garmin GPSMAP 8012/8212 Technical Specifications

Type:	Boat Equipment \| Display standsage
Provider:	NavPod
Cut/Uncut:	Cut
Edit Style:	Dash

NavPod PP5065 Pre-Cut PowerPod for Garmin GPSMAP 8012/8212 User ReviewsNavPod PP5065 Pre-Cut PowerPod for Garmin GPSMAP 8012/8212 Shipping and Returns

For know the detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.