NavPod PP5064 Pre-Cut PowerPod for Simrad NSE12/B&G Zeus Z12 Boat Outfitting

PP5064 Pre-Cut PowerPod for Simrad NSE12/B&G Zeus 12

PP5060 series, PowerPods for power supply are a better option than bracket mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail are intended to be mounted on a flat surface. Maybe under the hood or in the backof the cockpit table, especially on twin wheel boats.

The glossy material

NavPods are made with a co- Custom extruded acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% morethick and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel eel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to be able to count on experienced in-house design engineersés who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We've redesigned and revamped all the popular NavPods. We looked at all the old products and selected the best design elements from each and incorporated them into each new Gen3 product.

Compared to rack installation, PowerPods for Power is a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...
PRODUCT ID: 59226
SKU: NVN-59226
CSKU: CWR-59226
REWRITE: 70337-navpod-pp5064-powerpod-pre-cut-f-simrad- nse12-b-g-zeus
MPN: PP5064
UPC: 659988107364
ASIN: B00YAZKLZA
WSKU: NAVPP5064
SSKU:
KSKU: NPDPP5064
GSKU:
MSKU:
LSKU:
NAME: NavPod PP5064 PowPre-Cut erPod f/Simrad NSE12/B&G Zeus Z12
NAME_EX: NAVPOD PP5064 PRE-CUT POWERPOD FOR SIMRAD NSE12/B&G ZEUS
PTITLE: NavPod PP5064 PowerPod Pre-Cut f/Simrad NSE12/B&G Zeus Z12
> TYPE: Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NAVPOD Powerpod pre-cut f/simrad nse12/b, g zeus z12

Gtags:

GSpecs:

NavPod PP5064 Pre-Cut PowerPod for Simrad NSE12/B&G Zeus Z12 Product Description PP5064 Pre-Cut PowerPod for Simrad NSE12/B&G Zeus 12

PP5060 series, PowerPods for power are a better option than bracket mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from deterioration caused by prolonged UV exposure.

PowerPods for Sail sont intended to be mounted on a flat surface. Perhaps under the dodger or aft of the cockpit table, especially on boats with dual wheels.

The high gloss material

NavPods are made with custom co-extruded acrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The watertight seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker external silicone sealis with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We have theis fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances. We've redesigned and revamped all the popular NavPods. We looked at all previous products and selected the best design elements from each and incorporated them into each new Gen3 product.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...

Frequently Asked Questions (FAQ) about NavPod PP5064 Pre-Cut PowerPod for Simrad NSE12/B&G Zeus Z12 Who is NavPod?
How to describe the NavPod PP5064 PowerPod Pre-Cut f/Simrad NSE12/B&G Zeus Z12?
Is it cut or not?
How to mount or what is the mounting style of NavPod PP5064 PowerPod Pre-Cut -Cut f/Simrad NSE12/B&G Zeus Z12?
Who is NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod PP5064 PowerPod Pre-Cut f/Simrad NSE12/B&G Zeus Z12? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation. The latest industry...Is it cut or uncut? Cut

$101

NavPod PP5064 Pre-Cut PowerPod for Simrad NSE12/B&G Zeus Z12

$448

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cut
Editing style:	Dash

For detailed shipping terms, please review our shipping policy and you can findsee our returns and refund policy here.