NewMar BI200 Battery Charger Equalizer Electrical
NewMar BI-200 battery integrator, 12 volts, 200 amps. Charging multiple battery banks without using diode isolators requires that the batteries be connected or "integrated" only when a charging voltage is present so that they can be charged simultaneously and then disconnected or "isolated"? during use to allow selective discharge and prevent the secondary or backup battery from draining into the primary battery. Battery integrators perform this function automatically, acting as a "smart" system? switch to connect independent battery banks only when a charging voltage is present. Otherwise, they are isolated and discharge between banks is prevented. The traditional robust and reliable diode isolator can also be used for this function, as it also maintains isolation between banks and allows charging from multiple pennies.rces. However, a disadvantage is inefficiency when voltage is lost as current passes through the diodes, resulting in undercharging if the charging source does not compensate for the voltage drop. The battery integrator causes no voltage drop in the charging system, while the multiple batteries are charged as a single bank whenever a charging source of approximately 13.2 V DC or 26.4 V DC or more is present (depending on the model). When the alternator or charger is turned off or a heavy load causes the voltage to drop below the disconnect point, the unit breaks the common link between the banks. This allows for selective battery discharge and prevents "dumping" from a higher rate bank to a lower rate bank. The unit can also be activated to connect other batteries via the key starter or a manual switch to provide an additional 'boost'. of the bsecondary battery whenever the starter is engaged and the unit detects that there is sufficient voltage in this battery to provide assistance. For systems with more than two banks, an isolator must be installed for each additional bank to provide the same isolation and integration as described above.Dimensions: 3"H x 3.25"W x 2.5" P; Weight: 1 lb.
NeAttributes wMar BI200PRODUCT ID: 2005087
SKU: NVN-2005087
CSKU: CWR-2005087
REWRITE: 2016198-newmar-bi200- battery charger-equalizer
MPN: BI-200
UPC:
ASIN:
WSKU:
SSKU:
KSKU: NMRBI200
GSKU:
MSKU:
LSKU:
NAME: NewMar BI200 Battery Charger Equalizer
NAME_EX:
PTITLE: NewMar BI200 Battery Charger Equalizer
TYPE: Electric | Battery Chargers
SELLER: NewMar
Gtags:
GSpecs:
NewMar BI200 Battery Charger Equalizer Product Description
NewMar BI-200 Battery Integrator, 12 Volt, 200 AmpCharging multiple battery banks without using diode isolators requires the batteries to be connected or "integrated"? only when a charging voltage is present so that they can be charged simultaneously and then disconnected or "isolated"? during use to allow selective discharge and prevent the secondary or backup battery from draining into the primary battery. Battery integrators perform this function automatically, acting as a "smart" system? switch to connect independent battery banks only when a charging voltage is present. Otherwise, they are isolated and discharge between banks is prevented. The traditional robust and reliable diode isolator can also be used for this function, as it also maintains insulationbetween banks and allows charging from multiple sources. However, a disadvantage is inefficiency when voltage is lost as current passes through the diodes, resulting in undervoltage charging if the charging source does not compensate for the voltage drop. The battery integrator causes no voltage drop in the charging system, while the multiple batteries are charged as a single bank whenever a charging source of approximately 13.2 V DC or 26.4 V DC or more is present. (depending on model). When the alternator or charger is turned off or a heavy load causes the voltage to drop below the disconnect point, the unit breaks the common link between the banks. This allows for selective battery discharge and prevents "dumping" from a higher rate bank to a lower rate bank. The unit can also be activated to connect other batteries via the key starter or amanual switch to provide additional "boost". from the secondary battery whenever the starter is engaged and the unit senses that there is sufficient voltage in that battery to provide assistance. For systems with more than two banks, an isolator must be installed for each additional bank to provide the same isolation and integration as described above. Dimensions: 3"H x 3.25"W x 2.5" P; Weight: 1 lb.
NewMar BI200 AttributesFrequently Asked Questions (FAQ) NewMar BI200 Battery Charger Equalizer Who is NewMar?
Who is NewMar? Newmar DC Power is a leading manufacturer of high quality communications DC power products for over 50 years Newmar powers critical equipment in industries such as marine, telecommunications, networking, land mobile and communications.IOT automation. Newmar is dedicated to high quality with fast delivery and maintaining a large inventory of all products and components they can ship. standard products quickly and design, assemble and ship complete power plants in a fraction of the time it takes most other systems integrators. Providing the industry's fastest delivery of high-quality electrical products is what sets Newmar apart. Newmar offers a wide range of electrical products. DC Power products with a well-deserved reputation for high reliability and quality in powering wireless networks in broadband, iDAS, oDAS, microwave, cellular and land mobile applications. Available in 2V, 24V and 48V DC, they offer solutions including DC power systems, hot-swappable rectifiers, power supplies, DC-DC converters, DC-AC inverters,s DC distribution panels, DC power conditioners, DIN rail DC inverters, DIN. Railway power supplies and installation accessories.
Save $102 when you buy the NewMar BI200 Battery Charger Equalizer for only $319 at NVN Navy! Same day dispatch before 3 p.m. NewMar BI200 Battery Charger Equalizer Technical Specifications
| Type: | Electric | Battery Chargers |
|---|---|
| Supplier: | NewMar |
| Weight: | 2.0 lbs |
| Shipping Weight: | 2.0 lbs |
|---|---|
| Box sizes: | 5.00 (h) x 5.00 (w) x 5.50 (w) |
| Cubic feet: | 137.5 |
| Returnable: | Yes |
