Pre-cut NavPod SailPod for Garmin GPSMAP 923 923xsv 943 and 943xsv f/12″ Wide Guard Boat Outfitting

Pre-cut SailPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv for 12" Wide Guard

SailPods are intended for mounting a single radar or chartplotter at the helm. Navigation at your fingertips… "Where you need it, when you need it." SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily use it. use and clearly see the smallest details of the screen NavPods have a high gloss finish, giving you a clean mounting solution while hiding unsightly wires. The tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronics from the harshest, wettest offshore sailing conditions. A SailPod is best mounted on a single-curvature AngleGuard or the angled section of a guard. double curvature angle aith an InstrumentPod mounted above on the right section.

Structural Rigidity – Gen3 improvements now include a thicker stand. Gauged acrylic cape ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include an external seal inthicker silicone with improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SailPod in the future to service your electronics. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a little style!

Commitment to quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

PRODUCT ID: 92186
SKU: NVN-92186
CSKU: CWR-92186
REWRITE: 103297-navpod-sailpod-pre-cut-f-garmin-gpsmap-923-923xsv
MPN: GP2050-60
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SailPod pre-cut for Garmin GPSMAP 923, 923xsv , 943 and 943xsv f/12″ Wide Guard
NAME_EX: PRE-CUT NAVPOD SAILPOD FOR GARMIN GPSMAP 923/943XSV FOR
PTITLE: Pre-cut NavPodSailPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv f/12″ Wide Guard
br>TYPE: Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod GP2050 SailPod Uncut F 12 in. Guard

Gtags:

Fish finder
Chartplotter

GSpecs:

NavPod Pre-cut SailPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv f/12" Wide Guard Product description

Pre-cut SailPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv for 12" wide Guard

SailPods allow a single radar or chart plotter to be mounted at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. A SailPod is best mountedon a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above. Place it on the straight section.

Structural Rigidity – Gen3 improvements now include a thicker gauge acrylic coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SailPods are designed to withstand sailing conditionsgation offshore the most difficult and wet. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane seal is now 50% thicker and is not subject to "ion set compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-resistant, nickel-chrome-plated stainless steel screws provide security combined with a little style!

Commitment to quality – We stand by our commitmentment by offering a 10-year warranty on all new NavPods Gen3.

Frequently Asked Questions (FAQ) About NavPod SailPod Pre-Cut f/Garmin GPSMAP 923, 923xsv, 943 & 943xsv f/12″ Wide Guard Who is the NavPod?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertig HT seal, build quality and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access.

Save $99 when you purchase the Pre-Cut NavPod SailPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv f/12″ Wide Guard for only $350 from NVN Marine! Same day dispatch before 3 p.m. NavPod SailPod Pre-Cut f/Garmin GPSMAP 923, 923xsv, 943 & 943xsv f/12″ Wide Guard Technical specifications

Type:	Boat Outfitter \| Display Media
Supplier:	NavPod

NavPod SailPod pre-cut for Garmin GPSMAP 923, 923xsv, 943 and 943xsv f/12″ Wide Guard User reviewsNavPod SailPod pre-cut for Garmin GPSMAP 923, 923xsv, 943 and 943xsv f/12″ Wide Guard Shipping and returns

For detailed shipping policy, please see our shipping policy and you can find our return and refund policy here.