Pre-cut NavPod SailPod for Garmin GPSMAP 8412xsv and 8612xsv f/12″ Wide Guard Boat Outfitting

Pre-cut SailPod for Garmin GPSMAP 8412xsv and 8612xsv for 12" Wide Guard

SailPods are intended for mounting a single radar or chart plotter at the helm. Navigation at your fingertips… "Where you need it, when you need it." SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily use it and see clearly the smallest details of the screen. The NavPods have a high gloss finish, giving you a clean mounting solution while hiding unsightly wires. The tamper-proof nickel chrome screws provide a little bling and a lot of security. Double-sealed waterproof, NavPods protect your electronic devices from the harshest and wet offshore sailing conditions. It is best to mount a SailPod on a single-curvature AngleGuard or on the angled section of a double-curvature angle guard. with an InstrumentPod mounted above on right section.

Structural Rigidity – Gen3 improvements now include thicker support. acrylic cap gauge ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a sil external sealThicker icon with improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your e.electronics. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a little style!

Commitment to quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

PRODUCT ID: 92185
SKU : NVN-92185
CSKU: CWR-92185
REWRITE: 103296-navpod-sailpod-pre -cut-f-garmin-gpsmap-8412xsv
MPN: GP2050-33
UPC:
ASIN:
WSKU: NAVGP205033
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SailPod Pre-Cut for Garmin GPSMAP 8412xsv and 8612xsv f/ 12″ Wide Guard
NAME_EX: PRE-CUT NAVPOD SAILPOD FOR GARMIN GPSMAP 8412/8612XSV
PTITRE: Pre-Cut NavPod SailPod for Garmin GPSMAP 8412xsv and 8612xsv f/12″ Wide Guard
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod GP2050-33 SailPod for Garmin GPSMAP 8412/8612
br>
Gtags:

GSpecs:

NavPod Pre-cut SailPod for Garmin GPSMAP 8412xsv and 8612xsv f/12" Wide Guard Product description

Pre-cut SailPod for Garmin GPSMAP 8412xsv and 8612xsv for 12" wide protection

SailPods allow you to mount a single radar or chart plotter at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above on the strap.Straight Section.

Structural Rigidity – Gen3 enhancements now include ABS material coated with Thicker gauge acrylic that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SailPods are designed to withstand offshore sailing conditions lare more difficult and humid. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poron Microcell Polyurethane Internal Gasket is now 50% thicker and is not subject to "compression" as is the case with Poron Microcell Polyurethane Internal Gaskets. No rubber compound. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Enve commitmentrs quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

Frequently Asked Questions (FAQ) about the NavPod SailPod Pre-Cut f/Garmin GPSMAP 8412xsv & 8612xsv f/12″ Wide Guard Who what is the NavPod?
How to describe the NavPod SailPod Pre-Cut f/Garmin GPSMAP 8412xsv & 8612xsv f/12″ Wide Guard?
Who Is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod SailPod Pre-Cut f/Garmin GPSMAP 8412xsv & 8612xsv f/12″ Wide Guard? "

NAVPOD GP205033SailPod

Model: GP2050-33

Pre-cut SailPod for Garmin GPSMAP 8412xsv/8612xsv for 12? wide protection

SailPods allow a single radar or chartplotter to be mounted at the helm. Navigation at your fingertips? "Where you need it, when you need it." or a chartplotter at the helm where you can easily operate and clearly see the smallest details of the screen. The NavPod have a high brightness.oss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, the NavPod protects your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a single-bend AngleGuard or on the sloping section of a double-bend angle guard with an InstrumentPod mounted above on the straight section.

Structural Rigidity — Gen3 improvements now include thicker support. Gauge acrylic coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. Acrylic cap protects ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal — All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include external silic sealone thicker with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional NavPod series. The Nickel Chrome-Pla Stainless Steel Tamper Proof Screws provide security combined with a little style!

Commitment to Quality — We stand behind our commitment by offering a 10-year warranty on all new NavPodGen3. s.

Specificationions

Global
Height	11
Width	15,125
Depth	6,375
Usable side
Height	8.75
Width	12.75
Depth	5
Maximum cutout
Height	9
Width	13

"

Save $106 when you purchase the Pre-Cut NavPod SailPod for Garmin GPSMAP 8412xsv and 8612xsv f/12″ Wide Guard for only $343 at NVN Marine! Same day shipping before 3pm NavPod SailPod Pre-Cut f/Garmin GPSMAP 8412xsv & 8612xsv f/12″ Wide Guard Technical SpecificationsType:

Boat Equipment \| Display Media
Supplier:	NavPod

NavPod SailPod pre-cut for Garmin GPSMAP 8412xsv and 8612xsv f/12″ Wide Guard User reviewsNavPod SailPod pre-cut for Garmin GPSMAP 8412xsv and 8612xsv f/12″ Wide Guard Shipping and returns

For more policy details shipping policy, please review our shipping policy and you can find our return and refund policy here.