Pre-cut NavPod SailPod for Garmin GPSMAP 923/923xsv/943/943xsv f/9.5″ Wide Guard Boat Outfitting

Pre-cut SailPod for Garmin GPSMAP 923/923xsv/943/943xsv for 9.5″ wide protection

SailPods are intended for mounting a single radar or plotter of cards at the bar. Navigation at your fingertips… "Where you need it, when you need it. » SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a single-bend AngleGuard or on the angled section of a double-bend angle guardure with an InstrumentPod mounted above on the right section.

Structural Rigidity – Gen3 improvements now include a thicker stand. acrylic gauge capped ABMaterial S which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 upgrades include external sealThicker silicone with improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronics. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a little style!

Commitment to quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

SailPod pre-cut partsfor Garmin GPSMAP 923 / 923xsv / 943 / 943xsv, suitable for 9.5 inch wide GuardSailPods, which can be mounted on a helmet with a single radar or chart plotter. Navigate at your fingertips... "When...
PRODUCT ID: 88973
SKU: NVN-88973
CSKU: CWR-88973
REWRITE: 100084-navpod-sailpod-pre-cut -f -garmin-gpsmap-923-923xsv-943-943xsv-f-9-5
MPN: GP1800-14
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SailPod Pre-Cut for Garmin GPSMAP 923/923xsv/943/943xsv f/9.5″ Wide Guard
NAME_EX: NAVPOD SAILPOD PRE-CUT FOR GARMIN 923/943 Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

Gtags:

GSpecs:

NavPod Pre-Cut SailPod for Garmin GPSMAP 923/923xsv/943/943xsv f/9.5″ Wide Guard Product Description

Pre-Cut SailPod for Garmin GPSMAP 923/923xsv/943/943xsv for 9.5″ Wide Guard

SailPods allow you to mount a single radar or chart plotter at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above on the straight section.

Structural Rigidity – Gen3 enhancements now include ABS material coated with Thicker gauge acrylic that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SailPods are designed to withstand the harshest offshore sailing conditions.s difficult and wet. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane seal is now 50% thicker and is not subject to "compression" as is the case with many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Nickel-Chrome Plated Stainless Steel Tamper Proof Screws provide security combined with a little style!

Commitment to Quality – We deliver on our commitment by offering10 year warranty on all new Gen3 NavPods.

SailPod pre-cut parts for Garmin GPSMAP 923 / 923xsv / 943 / 943xsv, suitable for 9.5 inch wide GuardSailPods, which can be mounted on a helmet with a single radar or chart plotter. Navigating at your fingertips... "When...

Frequently Asked Questions (FAQ) about NavPod Pre-Cut SailPod/Garmin GPSMAP 923/923xsv/943/943xsv f/9.5″ Wide Guard Who is the NavPod?
How to describe the NavPod SailPod Pre-Cut f/Garmin GPSMAP 923/923xsv/943/943xsv f/9.5″ Wide Guard?
Which is the NavPod Navpod is a better way to mount your NavPod? sonar, radar or GPS The unique waterproof seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal,. Tamper-resistant fasteners for added security and convenience, concealed wiring and une clean installation for easy access. How to describe the NavPod SailPod Pre-Cut f/Garmin GPSMAP 923/923xsv/943/943xsv f/9.5″ Wide guard? SailPod pre-cut parts for Garmin GPSMAP 923 / 923xsv / 943 / 943xsv, suitable for 9.5 inch wide GuardSailPods, which can be mounted on a helmet with a single radar or chart plotter. Navigating at your fingertips... "When...

Save $95 when you purchase the NavPod SailPod Pre-Cut f/Garmin GPSMAP 923/923xsv /943/943xsv f/9.5″ Wide Guard for only $334 from NVN Marine! Same day shipping before 3pm NavPod SailPod Pre-Cut f/Garmin GPSMAP 923/923xsv/943. /943xsv f/9.5″ Wide Guard Technical Specifications

Type:	Boat Equipment \| Display Mounts
Supplier:	NavPod

Pre-cut NavPod SailPod for Garmin GPSMAP 923 /923xsv/943/943xsv f/9.5″ Wide Guard Reviews usersNavPod SailPod Pre-Cut for Garmin GPSMAP 923/923xsv/943/943xsv f/9.5″ Wide Guard Shipping & Return