Pre-cut NavPod SailPod for Garmin echoMAP Plus 92sv 93sv 94sv and 95sv f/9.5″ Wide Guard Boat Outfitting

Pre-cut SailPod for Garmin echoMAP Plus 92sv, 93sv, 94sv and 95sv for 9.5" Wide Guard

SailPods are intended for mounting a single radar or plotter of charts at the helm. Navigation at your fingertips… "Where and when you need it." SailPods are the smart solution for mounting your radar or chartplotter at the helm, where you can easily operate and see. clearly display every detail. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Chrome-plated, tamper-proof screws provide a little bling and a lot of security. Double-sealed waterproof seal, NavPods protect your electronic devices from the harshest and wet offshore sailing conditions. It is best to mount a SailPod on a single-curvature AngleGuard or on the angled section of a double-curved AngleGuard. curvature with an instrumentntPod mounted above on right section.

Structural Rigidity – Gen3 improvements now include thicker support. acrylic gauge Capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include thicker external silicone gasketwith an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to put it off your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a little style!

Commitment to quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

SailPod pre-cuts for Garmin echoMAP Plus 92sv, 93sv, 94sv and 95sv, suitable for 9.5 inch wide shields. SailPods are used to mount a single radar or chartplotter on the helmet. Navigate with your fingers...
PRODUCT ID: 87876
SKU: NVN-87876
CSKU: CWR-87876
REWRITE: 98987-navpod-sailpod-pre-cut-f-garmin-echomap -plus-92sv
Manufacturer Part Number: GP1900-15
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SailPod Pre-Cut f/Garmin echoMAP Plus 92sv, 93sv, 94sv & 95sv f/9.5″ Wide Guard
NAME_EX: NAVPOD SAILPOD PRECUT FOR GARMIN ECHOMAP PLUS 92/93/94 /
PTITLE: NavPod SailPod Pre-Cut f/Garmin echoMAP Plus 92sv, 93sv, 94sv and 95sv f/9.5″ Wide Guard
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

Gtags:

GSpecs:

NavPod Pre-cut SailPod for Garmin echoMAP Plus 92sv, 93sv, 94sv and 95sv f/9.5" Wide Guard Product description

Pre-cut SailPod for Garmin echoMAP Plus 92sv, 93sv, 94sv and 95sv for 9.5" large Guard

SailPods allow a single radar or chart plotter to be mounted at the helm. Navigation at your fingertips… "Where and when you need it. » SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPodon a Single Bend AngleGuard or on the angled section of a Double Bend Angle Guard with an InstrumentPod.ed mount above on the straight section.

Structural Rigidity – Gen3 enhancements now include coated ABS material of thicker gauge acrylic which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods are designed to withstand off-shore conditionsmost difficult and wet shores. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane seal is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Nickel-Chrome Plated Stainless Steel Tamper Proof Screws provide security combined with a little style!

Commitment to Quality – We honor our commitment by offering10 year warranty on all new Gen3 NavPods.

SailPod precuts for Garmin echoMAP Plus 92sv, 93sv, 94sv and 95sv, fit 9.5 inch wide shields. SailPods are used to mount a single radar or chartplotter on the helmet. Navigate with your fingers...

Frequently asked questions (FAQ) about the NavPod SailPod Pre-cut for Garmin echoMAP Plus 92sv, 93sv, 94sv and 95sv f/9.5″ Wide Guard Who is the NavPod ?
How to describe the Pre-Cut SailPod NavPod for Garmin echoMAP Plus 92sv, 93sv, 94sv and 95sv f/9.5″ Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenienceed, concealed wiring and clean installation for easy access. How to describe the NavPod SailPod Pre-Cut f/Garmin echoMAP Plus 92sv, 93sv, 94sv & 95sv f/9.5″ Wide guard? SailPod precuts for Garmin echoMAP Plus 92sv, 93sv, 94sv and 95sv, suitable for 9.5 inch wide shields. SailPods are used to mount a single radar or chartplotter on the helmet. Navigate with your fingers...

Save $99 when you buy the NavPod SailPod Pre-Cut f/Garmin echoMAP Plus 92sv, 93sv, 94sv & 95sv f /9.5″ Wide Guardfor only $340 at NVN Marine! Same day dispatch before 3 p.m. NavPod SailPod Pre-Cut f/Garmin echoMAP Plus 92sv, 93sv, 94sv & 95sv f/9.5″ Wide Guard Technical specifications

Type:	Boat Outfitter \| Display Media
Supplier:	NavPod

NavPod SailPod Pre-Cut f/Garmin echoMAP Plus 92sv, 93sv, 94sv & 95sv f/9.5″ Wide Guard User reviewsNavPod SailPod Pre-Cut f/Garmin echoMAP Plus 92sv, 93sv, 94sv & 95sv f/9.5″ Wide Guard Shipping and returns

For shipping conditions detailed shipping, please see our shipping policy and you can find our return and refund policy here.