NAVPOD RMX4900-14 Rail Mount for Humminbird SOLIX 10 Marine Navigation & Instruments

NAVPOD RMX4900-14 Railmount

Model: RMX4900-14

RailMount Pre-cut for Humminbird SOLIX 10 (fits 1? or 1, 25? )

RailMount NavPods are best used for mounting an autopilot control, navigation instrument, or small chart plotter to a protective cradle existing. Fits any 1" or 1.25" diameter tube. A chrome nickel plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All wiring runs from the NavPod down the center of the stainless steel arm and into the base shield. This application provides a clean, sturdy installation for electronics, without replacing the base guard.

Rail mounts are designed for all popular standard size instruments as well as track plotters.e 7- and 9-inch boards.

Structural Rigidity — Gen3 enhancements now include thicker acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All RailMount NavPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer seal with an adjustmentimproved flush stement. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a bit of style!

Specifications

Global
Height
in	11.61
cm	29.5
Width
in	14.25
Width	36.2
Depth
in	7.72
cm	19.6
Usable face
Height	7.39
in	7, 39
cm	18.8
Width
in	12.36
cm	31.4
Depth
in	5.29
cm	13.4
Maximum cutting
Height
in	8.09
cm	20.5
Width
in	13.26
cm	33.7
RMX Radius
Height
in	2.75
cm	7.0
Width
in	6.98
cm	17.7
Viewing angle	30

NAVPOD RMX4900-14 Rail Mount for Humminbird SOLIX 10 Product Description

NAVPOD RMX4900-14 Rail Mount

Model: RMX4900-14

Pre-cut rail mount for Humminbird SOLIX 10 (fits 1? or 1.25? tubes)

RailMount NavPods are best used for mounting an autopilot control, d a navigation instrument or a small chartplotter on an existing protective base. Fits any 1" or 1.25" diameter tube. A chrome nickel plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All wiring runs from the NavPod down the center of the stainless steel arm and into the base shield. This application provides a clean, sturdy installation for electronics, without replacing the base guard.

Rail mounts shave designed for all popular standard-size instruments as well as 7- and 9-inch chartplotters.

Structural Rigidity — Gen3 enhancements now include thicker gauge acrylicCapped ABS material that improves strength and offers better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All RailMount NavPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the harshest offshore sailing conditionss and wet. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the NavPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Nickel and Chrome Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a bit of style!

Specifications

Overall
Height
in	11.61
cm	29, 5
Width
in	14.25
Width	36.2
Depth
in	7.72
cm	19.6
Usable face
Height	7.39
in	7.39
cm	18.8
Width
in	12.36
cm	31.4
Depth
in	5.29
cm	13.4
Maximum cutout
Height
in	8.09
cm	20.5
Width
in	13.26
cm	33.7
RMX Radius
Height
in	2, 75
cm	7.0
Width
in	6.98
cm	17.7
Viewing angle	30

Save $374 when you purchase the NAVPOD RMX4900-14 Railmount for Humminbird SOLIX 10 for only $225 from NVN Marine! Same day dispatch before 3 p.m. NAVPOD RMX4900-14 Rail Mount for Humminbird SOLIX 10 Technical Specifications

Type:	Navigation and marine instruments \| Instruments
Supplier:	NavPod

NAVPOD RMX4900-14 Railmount for Humminbird SOLIX 10 User ReviewsNAVPOD RMX4900-14 Railmount for Humminbird SOLIX 10 Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our policy returns and refunds here.