NavPod RMX4818 Pre-Cut RailMount for Furuno GP1870/GP1870F Boat Outfitting

RMX4818 RailMount Pre-Cut for Furuno GP1870/GP1870F

RailMount NavPods are best used for mounting an autopilot control, navigation instrument or a small chartplotter on an existing base protection. Fits any 1" or 1.25" diameter tube. A chrome-plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All cables run from the NavPod down the center of the stainless steel arm and into the cradle guard. This application provides a clean, sturdy installation for electronics, without replacing the base guard.

Sizing:
Overall Size: 12"H x 8.375"W x 7.125"D
Usable face:8.375"H x 10.5"W x 5"D
Maximum cutout: 7.125"H x 10.25"W

All NavPods RailMount includeduent

ABS plastic with acrylic cap
Chrome-plated stainless steel tamper-proof fasteners
Double seal for waterproof integrity
Models are available pre-cut for popular electronic devices
Chrome-plated stainless steel arm with swivel mount
The two sets of adapters are included for 1" or 1.25" diameter tubing

Rail mounted navigation modules are most suitable for installing autopilots, navigation instruments or small chartplotters on existing basic protections. Fits any 1" or 1.25"...
PRODUCT ID: 54030
SKU: NVN-54030
CSKU: CWR-54030
REWRITE: 65141-navpod-rmx4818- railmount-pre-cut- f-furuno-gp1870-gp1870f
MPN: RMX4818
UPC: 659988108491
ASIN: B00YAZMCWA
WSKU:
SSKU:
KSKU:
GSKU :
MSKU:
LSKU:
NAME: NavPod RMX4818 RailMount Pre-Cut f/Furuno GP1870/GP1870F
NAME_EX: NAVPOD RAILMUNT PRE-CUT FOR FURUNO GP-1870 / GP-1870F
PTITLE: NavPod RMX4818 RailMount Pre-Cut -Cut f/Furuno GP1870/GP1870F
> TYPE: Boat fittings | Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod RMX4818 RailMount Pre-Cut f/Furuno GP1870/GP1870F

Gtags:

Automobile

GSpecs:

NavPod RMX4818 RailMount Pre-Cut f/Furuno GP1870/GP1870F Product Description RMX4818 RailMount Pre-Cut for Furuno GP1870/GP1870F

RailMount NavPods are best used for mounting a autopilot control, sailing instrument or a small chartplotter on an existing protective mount. Fits any 1" or 1.25" diameter tube. A chrome-plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All cables run from the NavPod down the center of the stainless steel arm and into the cradle guard. This application provides a clean, sturdy installation for electronics, without replacing the base guard.

Sizing:
Overall Size: 12"H x 8.375"W x 7.125"D
Usable face:8.375"H x 10.5"W x 5"D
Maximum cutoute:7.125"H x 10.25"W

All RailMount NavPods include

Acrylic Cap ABS Plastic
Fixed tamper evident chrome plated stainless steel
Double seal for waterproof integrity
Templates are available pre-cut for popular electronic devices
Chrome-plated stainless steel arm with swivel bracket
Both sets of adapters are included for 1" or 1.25" diameter tubing
/li>

Rail mounted navigation modules are most suitable for installing autopilots, navigation instruments or small chartplotters on existing base guards. Fits any 1" or 1.25"...

Frequently Asked Questions (FAQ) about NavPod RMX4818 RailMount Pre-Cut f/Furuno GP1870/GP1870F Who is the NavPod ?
How to describe NavPod RMX4818 RailMount precut f/Furuno GP1870/GP1870F?
Is it cut or uncut?
How to describe it?t mount or what is the mounting style of the Pre-Cut NavPod RMX4818 RailMount f/Furuno GP1870/GP1870F? Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, quality build and attractive design make the best-built instrument case available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod RMX4818 RailMount Pre-Cut f/Furuno GP1870/GP1870F? Rail mounted navigation modules are most suitable for installing autopilots, navigation instruments or small chartplotters onto existing base guards. Fits any 1" or 1.25"...Is it cut or uncut? Cut How to edit or what is the editing styleof the NavPod RMX4818 RailMount Pre-Cut f/Furuno GP1870/GP1870F? Rail

Save $133 when you purchase the NavPod RMX4818 RailMount Pre-Cut f/Furuno GP1870/GP1870F for only $466 from NVN Marine! Same day dispatch before 3 p.m. NavPod RMX4818 RailMount Pre-Cut f/Furuno GP1870/GP1870F Technical Specifications

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Mounting Style:	Rail
Cut/Uncut:	Cut

NavPod RMX4818 RailMount Pre-Cut f/Furuno GP1870/GP1870F User ReviewsNavPod RMX4818 RailMount Pre-Cut f/Furuno GP1870/GP1870F Shipping and return

For detailed shipping policy, please see our Shipping Policy and you can find our returns and refund policy here.