NavPod RMX4814 Pre-Cut RailMount for Raymarine a95/a97/a98 Boat Outfitting

RMX4814 RailMount Pre-Cut for Raymarine a95/a97/a98

RailMount NavPods are best used for mounting an autopilot control, navigation instrument or 'a small chartplotter on an existing base protection. Fits any 1" or 1.25" diameter tube. A chrome-plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All cables run from the NavPod down the center of the stainless steel arm and into the cradle guard. This application provides a clean, sturdy installation for electronics, without replacing the base guard.

Sizing:
Overall Size: 12"H x 8.375"W x 7.125"D
Usable face:8.375"H x 10.5"W x 5"D
Maximum cutout: 7.125"H x 10.25"W

All NavPods RailMount includeduent

ABS plastic with acrylic cap
Chrome-plated stainless steel tamper-proof fasteners
Double seal for waterproof integrity
Models are available pre-cut for popular electronic devices
Chrome-plated stainless steel arm with swivel mount
The two sets of adapters are included for 1" or 1.25" diameter tubing

Rail mounted navigation modules are best suited to the installation of autopilots, navigation instruments or small chartplotters on existing base protections. Fits any 1" or 1.25"...
PRODUCT ID: 54029
SKU: NVN-54029
CSKU: CWR-54029
REWRITE: 65140-navpod-rmx4814- railmount-pre-cut- f-raymarine-a95-a97-a98
MPN: RMX4814
UPC: 659988108965
ASIN: B00T6XCIPM
WSKU: NAVRMX4814
SSKU:
KSKU: NPDRMX4814
GSKU:
MSKU:
LSKU:
NAME : NavPod RMX4814 Pre-Cut RailMount f/Raymarine a95/a97/a98
NAME_EX: PRE-CUT NAVPOD RAILMUNT FOR RAYMARINE A95/A97/A98
PTITRE: NavPod RMX4814 Pre-Cut RailMount for Raymarine a95/a97/a98
TYPE: Boat equipment | DiSupports splay
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod RMX4814 RailMount Pre-Cut f/Raymarine a95/a97/a98

Gtags:

GSpecs:

NavPod RMX4814 RailMount Pre-Cut for Raymarine a95/a97/a98 Product Description RMX4814 RailMount Pre-Cut for Raymarine a95/a97/a98

RailMount NavPods are best used for mounting a control autopilot, navigation instrument or small chartplotter on an existing protective support. Fits any 1" or 1.25" diameter tube. A chrome-plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All cables run from the NavPod down the center of the stainless steel arm and into the cradle guard. This application provides a clean, sturdy installation for electronics, without replacing the base guard.

Sizing:
Overall Size: 12"H x 8.375"W x 7.125"D
Usable face:8.375"H x 10.5"W x 5"D
Cutoutmaximum pe:7.125"H x 10.25"W

All RailMount NavPods include

ABS plastic with acrylic cap
Fixed tamper evident chrome plated stainless steel
Double seal for waterproof integrity
Models are available pre-cut for electronic devices popular
Chrome-plated stainless steel arm with swivel bracket
Both sets of adapters included for 1" or 1.25" diameter tubing
/li>

Rail mounted navigation modules are most suitable for installing autopilots, navigation instruments or small chartplotters onto existing base guards. Fits any 1" or 1.25"...

Frequently Asked Questions (FAQ) about the NavPod RMX4814 RailMount Pre-Cut f/Raymarine a95/a97/a98 Who is the NavPod ?
How to Describe the Pre-Cut NavPod RMX4814 RailMount for Raymarine a95/a97/a98?
Is it cut orno?
How to mount or what is the mounting style of NavPod RMX4814 RailMount pre-cut for Raymarine a95 /a97/a98?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, quality build and attractive design make the best-built instrument house still available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod RMX4814 RailMount Pre-Cut f/Raymarine a95/a97/a98? Rail mounted navigation modules are most suitable for installing autopilots, navigation instruments or small chartplotters onto existing base guards. Fits any 1" or 1.25"...Is it cut or uncut? Cut

$111

NavPod RMX4814 RailMount Pre-Cut f/Raymarine a95/a97/a98

$488

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Weight:	7.9 lbs
Mounting Style:	Rail
Cut/Uncut:	Cut

Weight Shipping:	7.9 lbs
Box Sizes :	9.00 (h) x 12.00 (l) x 14.00 (w)
Feet cubes:	1512.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here. p>