NavPod RMX4811 Pre-Cut RailMount for Garmin 8008/8208 Boat Outfitting

RMX4811 RailMount Pre-Cut for Garmin 8008/8208

RailMount NavPods are best used for mounting an autopilot control, navigation instrument or a small chartplotter on an existing base protection. Fits any 1" or 1.25" diameter tube. A chrome-plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All cables run from the NavPod down the center of the stainless steel arm and into the cradle guard. This application provides a clean, sturdy installation for electronics, without replacing the base guard.

Sizing:
Overall Size: 12"H x 8.375"W x 7.125"D
Usable face:8.375"H x 10.5"W x 5"D
Maximum cutout: 7.125"H x 10.25"W

All RailMount NavPods include

/b>

Acrylic capped ABS plastic
Chrome plated stainless steel tamper evident fasteners
Double seal for waterproof integrity
Pre-cut models are available for popular electronic devices
Chrome-plated stainless steel arm with swivel mount
Both sets Adapters are included for 1" or 1.25" diameter tubing

Rail mounted navigation modules are most suitable for installing autopilots , navigation instruments or small chartplotters on existing base guards. Fits any 1" or 1.25"...
PRODUCT ID: 54027
SKU: NVN-54027
CSKU: CWR-54027
REWRITE: 65138-navpod-rmx4811- railmount-pre-cut- f-garmin-8008-8208
MPN: RMX4811
UPC: 659988108927
ASIN: B00YAZM7WK
WSKU: NAVRMX4811
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod RMX4811 RailMount Prcut-out for Garmin 8008/8208
NAME_EX: NAVPOD RAILMUNT PRE-CUT FOR GARMIN 8008/8208
PTITRE: NavPod RMX4811 RailMount Pre-cut for /Garmin 8008/8208
TYPE: Boat fitting | Display Mounts
SUPPLIER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod RMX4811 RailMount Pre-Cut f/Garmin 8008/8208

Gtags:

Automobile

GSpecs:

NavPod RMX4811 RailMount Pre-Cut f/Garmin 8008/8208 Product Description RMX4811 RailMount Pre-Cut for Garmin 8008/8208

RailMount NavPods are best used for mounting a autopilot control, sailing instrument or a small chartplotter on an existing protective mount. Fits any 1" or 1.25" diameter tube. A chrome-plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All cables run from the NavPod down the center of the stainless steel arm and into the cradle guard. This application provides a clean, sturdy installation for electronics, without replacing the base guard.

Sizing:
Overall Size: 12"H x 8.375"W x 7.125"D
Usable face:8.375"H x 10.5"W x 5"D
Maximum cutout: 7,125"H x 10.25"W

All RailMount NavPods include

Acrylic Cap ABS Plastic
Chrome-plated stainless steel tamper-resistant fasteners
Double seal for waterproof integrity
Templates are available pre-cut for popular electronic devices
Chrome-plated stainless steel arm with swivel bracket
/li>
Both adapter sets are included for 1" or 1.25" diameter tubing

Rail mounted navigation modules are ideal for installing autopilots, navigation instruments or small chartplotters. on existing base guards. Fits any 1" or 1.25"...

Frequently Asked Questions (FAQ) about the NavPod RMX4811 RailMount Pre-Cut f/Garmin 8008/8208 Who is the NavPod?
How to describe the Pre-Cut NavPod RMX4811 RailMount for Garmin 8008/8208?
Is it cut or uncut?
How to describe it?t mount or what is the mounting style of the Pre-Cut NavPod RMX4811 RailMount for Garmin 8008/8208? Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive design make the best-built instrument case ever available to the marine industry.try. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod RMX4811 RailMount Pre-Cut f/Garmin 8008/8208? Rail mounted Nav Pods are most suitable for installing autopilots, navigation instruments or small chartplotters onto existing base guards. Fits any 1" or 1.25"...Is it cut or uncut? Cut How to mount or what is the mounting style of NavPod RMX4811 RailMount Pre-Cut f/Garmin 8008/8208? Rail

Save $141 when you purchase the NavPod RMX4811 RailMount Pre-Cut f/Garmin 8008/8208 for only $458 from NVN Marine! Same day dispatch before 3 p.m. NavPod RMX4811 RailMount Pre-Cut f/Garmin 8008/8208 Technical Specifications

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Mounting Style:	Rail
Cut/Uncut:	Cut

NavPod RMX4811 RailMount Pre-Cut f/Garmin 8008/8208 User reviewsNavPod RMX4811 RailMount Pre-Cut -Cut f/Garmin 8008/8208 Shipping & Returns

For detailed shipping terms, please see our shipping policy and you can find our returns & refund policy here.