NavPod RMX4900-01 Pre-Cut RailMount for Raymarine eS97/eS98 Boat Outfitting

RMX4900-01 RailMount Pre-Cut for Raymarine eS97/eS98

RailMount NavPods are best used for mounting an autopilot control, navigation instrument or 'a small chartplotter on an existing base protection. Fits any 1" or 1.25" diameter tube. A chrome-plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All cables run from the NavPod down the center of the stainless steel arm and into the cradle guard. This application provides a clean, robust installation for electronics, without replacing the cradle protection.

High gloss material

NavPods are Made with custom co-extruded ABS material with acrylic cap. We use the best UV resistant material that provides a superior finishVery bright white ion that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides greater structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices.

Chrome-plated nickel screws

We useWe include all stainless steel mounting hardware included with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel plated stainless steel tamper proof screws for added security.combined with a little bling!

The manufacturing process

Large gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality

Weare committed to producing the best possible waterproof enclosure for marine electronics. Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10-year warranty on all new Gen3 NavPods.

Rail-mounted navigation pods are best suited for driver installation automatics, navigation instruments or small hull tracers on the existing base guards. Fits any 1" or 1.25"...
PRODUCT ID: 59325
SKU: NVN-59325
CSKU: CWR-59325
REWRITE: 70436-navpod-rmx4900- 01-railmount-pre-cut-f-raymarine-es97-es98
MPN: RMX4900-01
UPC: 659988110944
ASIN: B01DBH9JM8
WSKU: NAVRMX490001
SSKU:
KSKU :
GSKU:
MSKU:
LSKU:
NAME: NavPod RMX4900-01 Pre-cut RailMount for RaymarineeS97/eS98
EX_NAME: NAVPOD RMX4900-01 PRE-CUT RAILMUNT FOR RAYMARINE ES97
PTITLE: NavPod RMX4900-01 Pre-Cut RailMount for Raymarine eS97/eS98
TYPE: Boat Equipment | Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod RMX4900-01 RailMount Pre-Cut f/Raymarine eS97 /eS98

Gtags:

GSpecs:

NavPod RMX4900-01 Pre-Cut RailMount for Raymarine eS97/eS98 Product Description RMX4900-01 Pre-Cut RailMount for Raymarine eS97/eS98

NavPods RailMount are best used for mounting a control panel autopilot, a navigation instrument or a small chartplotter on an existing protective mount. Fits any 1" or 1.25" diameter tube. A chrome-plated stainless steel arm is used to mount a NavPod. The NavPod can rotate 180 degrees for easy viewing when sitting under the vehicle on a rainy day. All cables run from the NavPod down the center of the stainless steel arm and into the cradle guard. This application provides a clean, robust installation for electronics, without replacing the cradle protection.

High gloss material

NavPods are Made with custom co-extruded ABS material with capin acrylic. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

The waterproof seal

All NavPods are manufactured with a double seal system providing an excellent seal between the front and back of the NavPod for the protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices

Nickel plated chrome screws

We use all stainless steel mounting hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide tamper proof nickel chrome plated stainless steel screws for added security combined with a little bling!

The manufacturing process

Large caliber thermoforming is considered an art since many processes come into play. It all starts with the design and development of the tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.ision.

Our commitment to quality

We are committed to producing the best possible waterproof enclosure for marine electronics . Now, with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a shiny, durable finish. We will deliver on our commitment by now offering a 10 year warranty on all new Gen3 NavPods.

Rail mounted navigation pods are most suitable for installing autopilots, navigation instruments or small chartplotters on existing base guards. Fits any 1" or 1.25"...

Frequently Asked Questions (FAQ) about NavPod RMX4900-01 Pre-Cut RailMount for Raymarine eS97/eS98 what is NavPod?
How to describe NavPod RMX4900-01 RailMount Pre-Cut f/Raymarine eS97/eS98?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod RMX4900-01 RailMount Pre-Cut f/Raymarine eS97/eS98?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod RMX4900-01 RailMount Pre-Cut f/Raymarine eS97/eS98? Rail-mounted navigation modules are most suitable for installing autopilots, navigation instruments or small chart plotters on existing basic protections. Fits any 1" or 1.25"...Is it cut or uncut? Cut How to mount or what is the style ofmounting NavPod RMX4900-01 RailMount Pre-Cut f/Raymarine eS97/eS98? Rail

Save $141 when you purchase the NavPod RMX4900-01 RailMount Pre-Cut f/Raymarine eS97/eS98 for only $458 from NVN Marine! Same day dispatch before 3 p.m. NavPod RMX4900-01 Pre-Cut RailMount f/Raymarine eS97/eS98 Technical Specifications

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Weight:	9.4 lbs
Cut/Uncut:	Couped
Mounting Style:	Rail

NavPod RMX4900-01 Pre-Cut RailMount for Raymarine eS97/eS98 User ReviewsNavPod RMX4900-01 Pre-Cut RailMount for Raymarine eS97/eS98 Shipping & Returns

Shipping Weight:	9.4 lbs
Box sizes:	8.00 (h) x 11.00 (w) x 17.00 (w)
Cubic feet:	1496.0
Recordable:	Yes