Pre-Cut NavPod SailPod for Garmin 1242xsv 1222xsv and 1222 f/9.5" Wide Guard Boat Outfitting

Pre-cut SailPod for Garmin 1242xsv, 1222xsv and 1222 for 9.5 inch wide protection

SailPods allow mounting of a single radar or chart plotter at the helm. Navigation at your fingertips. "Where you need it…when you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm, where you can easily operate it and clearly see even the smallest details of the screen. , giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest offshore sailing conditions. It is best to mount it on a single-bend AngleGuard or use a double-bend AngleGuard to install an InstrumentPod on the upper vertical sectionupper and a SailPod below on the angled section.

Structural Rigidity – Gen3 improvements now include a thicker gauge and acrylic capped ABS material that improves strength and provides better rigidity structural. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All SailPods are manufactured with a double seal system providing excellent waterproofing. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Ge improvementsn3 include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the SailPod in the future to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to quality - We stand behind our commitment en offering a 10 year warranty. on all new NavPods Gen3.

Boat

GSpecs:

NavPod Pre-cut SailPod for Garmin 1242xsv, 1222xsv and 1222 f/9.5" Wide Guard Product description

Pre-cut SailPod for Garmin 1242xsv, 1222xsv and 1222 for 9.5" wide protection

SailPods allow a single radar or chartplotter to be mounted at the helm. Navigation at your fingertips. "Where you need it…when you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see small details on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is better to ride a SailPod on a single curvature AngleGuard or use a double curvature AngleGuard to install an InstrumentPod on the top vertical section and a SailPod below on the inclined section.

Structural Rigidity – Gen3 improvements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All SailPods are manufactured with a double seal system providing excellent waterproofing. This seal offers the best protection for yourbe marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression adjustment" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof stainless steel screwsnickel-chrome plated for added safety and a bit of style!

Commitment to quality - We back our commitment by offering a 10-year warranty. on all new NavPods Gen3.

Pre-cut SailPods 1242xsv, 1222xsv and 1222 (for a 9.5 inch wide shield) SailPods for Garmin are used to mount a single radar or plotter maps on the headset. Fingertip navigation. "In case of need...in case of need." Sail Pods is an intelligent solution that installs a radar or chartplotter on the helm. You can easily operate and see the screen details clearly. The NavPods are very bright,

Frequently asked questions (FAQ) about the NavPod SailPod Pre-Cut f/Garmin 1242xsv, 1222xsv & 1222 f/9.5" Wide Guard Who what is the NavPod?
How to describe the Pre-Cut SailPod NavPod f/Garmin 1242xsv, 1222xsv and 1222 f/9.5" Wide Guard?
Is it neckcut or uncut?
How to mount or what What is the mounting style of the NavPod SailPod Pre-Cut f/Garmin 1242xsv, 1222xsv & 1222 f/9.5" Wide Guard?
Who is the NavPod ?Navpod is a better way to mount your fishfinder, radar or GPS The unique waterproof seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. All NavPods include the waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access.How to Describe the NavPod Pre-Cut SailPod f/Garmin 1242xsv, 1222xsv and 1222 f /9.5" Wide Guard? Pre-Cut SailPod 1242xsv, 1222xsv and 1222 (for 9.5 inch wide shield) SailPods for Garmin are used to mount a single radar or chart plotter to the helmet. Fingertip navigation. "In case of need...in case of need." Sail Pods est a smart solution that installs a radar or chartplotter on the helm. The NavPod screen is very bright, is it cut or uncut? How to mount or what is the mounting style of the NavPod SailPod Pre-Cut f/Garmin 1242xsv , 1222xsv. & Wide Guard 1222 f/9.5"? Pedestal

Save $110 when you purchase the pre-cut NavPod SailPod for Garmin 1242xsv, 1222xsv and 1222 f/ 9.5" Wide Guardfor only $389 from NVN Marine! Same day dispatch before 3 p.m. Pre-Cut NavPod SailPod for Garmin 1242xsv, 1222xsv and 1222 f/9.5" Wide Guard Technical Specifications.ons

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Weight:	7.5 lbs
Cut/Uncut:	Couped
Mounting Style:	Pedestal

NavPodPre-Cut SailPod for Garmin 1242xsv, 1222xsv and 1222 f/9.5" Wide Guard User ReviewsNavPod Pre-Cut SailPod for Garmin 1242xsv, 1222xsv and 1222 f/9.5" Wide Guard Shipping & Returns

Shipping Weight:	7.5 lbs
Box Sizes:	8.00 (h) x 11.00 (w) x 17.00 (w)
Cubic feet:	1496.0
Returnable:	Yes

For detailed purchase orderAs a general rule, please see our shipping policy and you can find our return and refund policy here.