Pre-Cut NavPod SailPod for Garmin GPSMAP 8410xsv/8610xsv f/9.5" Wide Guard Boat Outfitting

Pre-cut SailPod for Garmin GPSMAP 8410xsv/8610xsv for 9.5" wide protection

SailPods allow you to mount a single radar or chartplotter at the helm. Navigation at your fingertips… "Where you need it, when you need it." SailPods are the smart solution for mounting your radar or chartplotter at the helm where you can easily operate and see details clearly The NavPods have a glossy finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof plated screws provide a little bling and a lot of security. NavPods protect your electronic devices from the harshest offshore sailing conditions. It is best to mount a SailPod on a single-bend AngleGuard or on the inclined section of a double-bend angle guard with an InstrumentPod m.installed above on the straight section.

Structural Rigidity – Gen3 improvements now include thicker gauge acr Ylic-capped ABS material that improves strength and provides better rigidity structural. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All SailPods are manufactured with a double seal system providing a excellent sealing. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 upgrades include external sealThicker silicone rne with improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Chrome Nickel Plated Stainless Steel Tamper Proof Screws offer security combined with a bit of style!

Commitment to Quality – We stand behind our commitment by offering a 10 year warranty on all new NavPods Gen3.

SailPod for Garmin GPSMAP pre-cut GPSMAP 8410xsv / 8610xsv (for 9.5 inch wide shield) SailPods are used to mount a single radar or chartplotter on the helmet. Fingertip navigation..."...
PRODUCT ID: 78186
SKU: NVN-78186
CSKU: CWR-78186
REWRITE: 89297-navpod-sailpod-pre-cut- f-garmin -gpsmap-8410xsv-8610xsv-f-9-5
MPN: GP1800-10
UPC: 659988120394
ASIN: B07XV7H5JJ
WSKU: NAVGP180010
SSKU:
KSKU :
GSKU:
MSKU:
LSKU:
NAME: NavPod SailPod pre-cut for Garmin GPSMAP 8410xsv/8610xsv f/9.5" Wide Guard
NAME_EX: NAVPOD GP1800-10 SAILPOD PRE -CUT FOR GARMIN GPSMAP 8410XSV
PTITLE: Pre-Cut NavPod SailPod for Garmin GPSMAP 8410xsv/8610xsv f/ 9.5" Wide Protection
TYPE: Boat Equipment | Display Mounts
SELLER : NavPod
ELECTRONICS> MARINE ELECTRONICS

NAVPOD SailPod Pre-Cut f/Garmin GPSMAP 8410xsv/8610xsv f/ 9.5 inches wide

Gtags:

Boat

GSpecs:

NavPod Pre-Cut SailPod for Garmin GPSMAP 8410xsv/8610xsv f/9.5" Wide Guard Product Description

Pre-Cut SailPod for Garmin GPSMAP 8410xsv/8610xsv for 9.5" Wide Guard

SailPods allow a single radar or chartplotter to be mounted at the helm. Navigation at your fingertips… "Where and when you need it. » SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a Single Bend AngleGuard or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above on the straight section.

Structural Rigidity – Gen3 enhancements now include a Thicker gauge acrylic coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All SailPods are manufactured with a double seal system providing a excellent sealing. This seal offers the best protection for your marine electronics. SailPods are designed to withstand sailing conditionsgation offshore the most difficult and wet. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane seal is now 50% thicker and is not subject to "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a little style!

Commitment to quality – We respWe stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

SailPod for Garmin GPSMAP pre-cut GPSMAP 8410xsv / 8610xsv (for 9.5 inch wide shield) SailPods are used to mount a single radar or chartplotter on the helmet. Fingertip navigation..."...

Frequently Asked Questions (FAQ) About the NavPod SailPod Pre-Cut f/Garmin GPSMAP 8410xsv /8610xsv f/9.5" Wide Guard Who is the NavPod?
How to describe the NavPod SailPod Pre-Cut f/Garmin GPSMAP 8410xsv/8610xsv f /9.5" wide?
Is it cut or not?
How to mount or what is the mounting style of the NavPod SailPod Pre-Cut f/Garmin GPSMAP 8410xsv/8610xsv f/9.5" Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. Unique waterproof seal, build quality and attractive design make the best-built instrument case ever availablefor the maritime industry. Features of all Navpods include waterproof silicone seal, tamper-resistant fasteners for added security and convenience, concealed wiring and clean installation for easy access. How to describe NavPod SailPod Pre-Cut f/Garmin GPSMAP 8410xsv/8610xsv f/9.5" Wide Guard? SailPod for Garmin GPSMAP Pre-Cut GPSMAP 8410xsv / 8610xsv (for 9.5" wide shield) SailPods are used to mount a single radar or chart plotter on the headset. Fingertip navigation..."...Is it muted or not muted? Cut How to mount or what is the mounting style of the NavPod SailPod Pre-Cut f/Garmin GPSMAP 8410xsv/8610xsv f/9.5" Wide Guard? Pedestal

Save $101 when you purchase the Pre-Cut NavPod SailPod for Garmin GPSMAP 8410xsv/8610xsv f/9.5" Wide Guard for only $328 from NVN Navy! Same day dispatch before 3 p.m. Pre-cut NavPod SailPod for Garmin GPSMAP 8410xsv/8610xsv f/9.5" Wide Guard Technical Specifications

Type:	Boat Equipment \| Display Mounts
Provider:	NavPod
Cut/Uncut:	Couped
Mounting Style:	Pedestal
User Guide:	Download PDF

NavPod SailPod Pre-Cut for Garmin GPSMAP 8410xsv/8610xsv f/9.5" Wide Guard User ReviewsNavPod SailPod Pre-Cut for Garmin GPSMAP 8410xsv/8610xsv f/9.5" Wide Guard Shipping & Return

For detailed shipping policy , please review our shipping policy and you can find our return and refund policy here.