Pre-cut NavPod SailPod for Garmin GPSMAP 1223 1223xsv 1243 and 1243xsv f/12″ Wide Guard Boat Outfitting
Pre-cut SailPod for Garmin GPSMAP 1223, 1223xsv, 1243 and 1243xsv for 12" Wide Guard
SailPods are intended for mounting a single radar or chart plotter at the helm. Navigation at your fingertips… "Where you need it, when you need it." SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily use it. use and clearly see the smallest details of the screen NavPods have a high gloss finish, giving you a clean mounting solution while hiding unsightly wires. The tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronics from the harshest, wettest offshore sailing conditions. A SailPod is best mounted on a single-curvature AngleGuard or the angled section of a guard. double curved anglere with an InstrumentPod mounted above on the right section.
Structural Rigidity – Gen3 improvements now include a thicker stand. acrylic gauge applied ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 upgrades include exterior sealne made of thicker silicone with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to see repair your electronic devices. The seal will continue to do its job.
Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof nickel-chrome-plated stainless steel screws provide security combined with a little style!
Commitment to quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.
PRODUCT ID:92187
SKU: NVN-92187
CSKU: CWR-92187
REWRITE: 103298-navpod-sailpod-pre-cut-f-garmin-gpsmap-1223-1223xsv
MPN: GP2200-20
br>UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SailPod pre-cut f/Garmin GPSMAP 1223, 1223xsv, 1243 & 1243xsv f/12″ Wide Guard
NAME_EX: PRE-CUT NAVPOD SAILPOD FOR GARMIN GPSMAP 1123/1243XSV
PTITLE: Pre-cut NavPod SailPod for Garmin GPSMAP 1223, 1223xsv, 124 3 and 1243xsv f/ 12″ Wide Guard
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS
NavPod - GP2200 SailPod Uncut f/12" Wide Guard
br>
Gtags:
Fish finder | |
Chartplotter |
GSpecs:
NavPod Pre-cut SailPod for Garmin GPSMAP 1223, 1223xsv, 1243 and 1243xsv f/12" Wide Guard Product description
Pre-cut SailPod for Garmin GPSMAP 1223, 1223xsv, 1243 and 1243xsv for 12" wide Guard
SailPods allow a single radar or chart plotter to be mounted at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SailPods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily operate it and clearly see every minute detail on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. A SailPod is midthem mounted on a Single Bend AngleGuard, or on the inclined section of a Double Bend Angle Guard with an InstrumentPod holder placed above on the straight section.
Structural Rigidity – Gen3 improvements now include a Thicker gauge acrylic coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SailPods are designed to withstand harsh conditions.e most difficult and wet offshore navigation. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane seal is now 50% thicker and is not subject to a "compression set" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.
Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Nickel-Chrome Plated Stainless Steel Tamper Proof Screws provide security combined with a little style!
Commitment to Quality – We stand by our commitment inoffering a 10-year warranty on all new Gen3 NavPods.
Frequently Asked Questions (FAQ) About NavPod SailPod Pre-Cut f/Garmin GPSMAP 1223, 1223xsv, 1243 and 1243xsv f/12″ Wide Guard Who is the NavPod?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The university's tight seal, build quality and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access.
Save $118 when you purchase the Pre-Cut NavPod SailPod for Garmin GPSMAP 1223, 1223xsv, 1243 and 1243xsv f/12″ Wide Guard for only $381 at NVN Marine! Same day dispatch before 3 p.m. Pre-cut NavPod SailPodfor Garmin GPSMAP 1223, 1223xsv, 1243 and 1243xsv f/12″ Wide Guard Technical Specifications
Type: | Boat Outfitter | Display Media |
---|---|
Supplier: | NavPod |
For detailed shipping policy, please see our shipping policy and you will find our return & refund policy. here.
- Pre-cut NavPod SailPod for Garmin GPSMAP 1042xsv 1022xsv and 1022 f/9.5″ Wide Guard
- Pre-cut NavPod SailPod for Garmin GPSMAP 1042xsv 1022xsv and 1022 f/12″ Wide Guard
- Pre-cut NavPod SailPod for Garmin GPSMAP 942xs/942/922xs/922 f/12″ Wide Guard
- Pre-cut NavPod SailPod for Garmin GPSMAP 923/923xsv/943/943xsv f/9.5″ Wide Guard
- Pre-cut NavPod SailPod for Garmin echoMAP Plus 92sv 93sv 94sv and 95sv f/9.5″ Wide Guard
- Pre-Cut NavPod SailPod for Garmin 8612xsv/8412xsv f/9.5" Wide Guard
- Pre-Cut NavPod SailPod for Garmin 1242xsv 1222xsv and 1222 f/9.5" Wide Guard