R&D motor mount with 4" footprint - 5/8" stud - 50 to 175 lb capacity per mount Marine Hardware

Engine mount with 4" footprint - 5/8" stud - 50 to 175 lb capacity per mount

R&D marine engine mounts are designed specifically for the rigors of marine applications . The mounts are rigid enough to absorb thrust from the fore and aft propeller, but soft enough to isolate transmission vibrations from the hull.

To help increase the longevity of the mounts, all parts in steel are zinc plated and pasivated to limit corrosion. . The rubber component is coated with an oil shield to protect it from petroleum-based products.

R&D Marine mounts are preloaded based on the combined weight of the engine and transmission to limit movement of the engine. For ease of installation, the brackets are height adjustable and the mounting holes in the base of the bracket are slotted to aid transmission alignment.

How to select (details requis):
1.Define the total weight of the engine and transmission.
2.Determine 60% of the total weight then divide by 2 to determine the capacity of each of the rear supports (the side supports engine transmission).
3. Determine 40% of the total weight then divide by 2 to determine the capacity of each of the front mounts (the mounts opposite the transmission side of the engine).
4. Determine the required stud diameter and bracket footprint.
5. Choose the most appropriate size bracket for the weight of each bracket. When possible, choose the bracket closest to the middle of the weight range.

Example:
The weight of the motor is 480 lbs, the weight of the transmission is 110 lbs, footprint is 4", stud diameter is 5/8".
Total weight is 590 lbs.
590 x 0.6/2 = 177 lbs by rear support. Required brackets are 800-010
590 x 0.4/2 = 118 lbs per rear bracket. Supportsrequired are 800-037

Why R&D Marine Engine Mounts?

Designed for marine use, accepts thrust from propeller and motor in both directions
Offers a fail-safe design
R&D marine mounts are height adjustable
Preloaded to reduce movement
Oblong holes in the base for easy alignment
Mounting types suitable for all applications

Engine support with 4" recess and 5/8" bolt (800-037) from R&D Marine. This high-quality R&D Marine product can make your water adventures safe and enjoyable. seriously...
PRODUCT ID: 54881
SKU: NVN-54881
CSKU: CWR-54881
REWRITE: 65992-r-d-engine-mount-w-4-footprint
MPN: 800-037
UPC: 839662000116
ASIN: B00TFTVOSO
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: R&D Engine Mount with 4" Footprint - Stud5/8" - 50-175 lbs capacity per bracket
NAME_EX: R&D MOTOR BRACKET WITH 4" INTAKE 5/8" STUD, 50-175 LBS
PTITLE: R&D Motor BRACKET with 4" footprint - 5/8" stud - 50 to 175 lb capacity per bracket
TYPE: Marine Hardware | Engine Mounts
SUPPLIER: R&D Marine
VEHICLES & PARTS> PARTS AND ACCESSORIES VEHICLES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT ENGINE PARTS R&D Engine Mount with 4 Footprint - 5/8 Stud - 50 to 175 lb Per Capacity support

Gtags:

GSpecs:

R&D Motor Mount with 4" Footprint - 5/8" Stud - 50 to 175 lb. Capacity per Bracket Product Description Motor Mount with 4" Footprint - 5/8" Stud - 50 to 175 lb. Capacity per Bracket lbs per mount

R&D marine engine mounts are designed specifically for the rigors of marine applications. The mounts are rigid enough to absorb thrust from the fore and aft propeller, but soft enough to isolate transmission vibrations from the hull.

To help increase the longevity of the mounts, all parts in steel are zinc plated and pasivated to limit corrosion. . The rubber component is coated with an oil shield to protect it from petroleum-based products.

R&D Marine mounts are preloaded based on the combined weight of the engine and transmission to limit movement of the engine. For ease of installation, the brackets are height adjustable and the mounting holes ins base of the bracket are slotted to aid transmission alignment.

How to select (details required):
1. Adjust the total weight of the engine and the transmission.
2.Determine 60% of the total weight then divide by 2 to determine the capacity of each of the rear supports (the supports on the transmission side of the engine).
3.Determine 40% of the total weight then divide by 2 to determine the capacity of each of the front brackets (the brackets opposite the transmission side of the engine).
4.Determine the stud diameter needed. and the footprint of the support.
5. Choose the most appropriate size bracket for the weight per bracket. When possible, choose the bracket closest to the middle of the weight range.

Example:
The weight of the motor is 480 lbs, the weight of the transmission is 110 lbs, footprint is 4", stud diameter is 5/8".
Total weight is 590 lbs.
590 x 0.6/2 = 177lbs per rear support. Required brackets are 800-010
590 x 0.4/2 = 118 lbs per rear bracket. Required brackets are 800-037

Why R&D Marine Engine Mounts?

Designed for marine use, acceptller and thrust the engine in two-way
Offers a fail-safe design
R&D marine mounts are height adjustable
Pre-loaded to reduce movements
Oblong holes in the base for easy alignment
Mounting types to suit all applications

Engine mount with 5/8" bolt with 4" recess from R&D Marine (800-037). This high-quality R&D Marine product can make your water adventures safe and enjoyable. seriously...

Frequently Asked Questions (FAQ) about the R&D Engine Mount with 4" Footprint - 5/8" Stud - 50 to 175 lb Capacity per Mount Who is R&D Marine?
How to describe mote supportur R&D with 4" footprint - 5/8" stud - 50 to 175 lb capacity per support?
Who is R&D Marine? It has always been considered essential that all products are easy to use, safe and above all available at the right price. R&D Marine prides itself on being able to supply or assemble from stock most products to cover urgent breakdowns. Thanks to the service provided, the suitability of the products and customer recommendations, it has been possible to develop the global distribution network that R & D Marine has today. How to describe the R&D Motor Mount with 4" Footprint - 5 /8" Stud - 50 to 175 lb Capacity per Bracket? 5/8" Bolt Motor Mount (800-037) from R&D Marine. This high quality R&D Marine product can make your adventures on the water safe and enjoyable. seriously...

Save $34 when you purchase the R&D Motor Mount with 4" Footprint - 5/8" Stud - 50 to 175 lb. Capacityper piece Mountfor only $136 from NVN Marine! Same day dispatch before 3 p.m. R&D Motor Mount with 4" Footprint - 5/8" Stud - 50 to 175 lb. Capacity per Bracket Technical Specifications

Type:	Marine Hardware \| Engine mounts
Supplier:	Marine R&D
Weight:	2.4 lbs
User Guide:	Download PDF
Product brochure:	Download PDF

R&D Motor Mount with 4" Footprint - 5/8" Stud - 50 to 175 lb Capacity per Bracket User ReviewsR&D Motor Mount with 4" Footprint - 5/8 Stud " - 50 to 175 lb. capacity per rack Shipping & Returns

Shipping Weight:	2.4 lbs
Box sizes:	4.00 (h) x 6.00 (w) x 6.00 (w)
Cubic feet:	144.0
Returnable:	Yes