Seaview SPOD Sail Pod Uncut Small Screen MFD Boat Outfitting
Seaview SP2S Small MFD Sailboat PodThe SPOD is a pod for sailboats and catamarans. There are five different box sizes to fit almost any chartplotter or instrument on the market. Seaview designed the SPOD so that the back of each box has a continuous radius that matches the stainless steel pod clips. The result is a precise viewing angle defined during installation for the customer. The module fits the majority of steering racks from Jefa, Whitlock and Edson and can be customized for other systems. Stainless steel clamps attach to 1", 1.125" and 1.25" rails. Security screws are used to hold the SPOD together. A waterproof gasket is used to keep water out inside the pod, while a GORE-TEX ventilation vent allows hot air to escape without letting water in. Maximum usable face (11.75" × 7") Maximum cutout area (11). " × 6.125") PeUse up to 2 optional accessory modules (part # SP1BOX)
Seaview SP2S AttributesSea View SPOD Sail Pod Box
Small uncut sail module with 2 S.S. clamps
Overall dimensions:
- Width: 12.305"
- Height: 7.555"
- Depth: 5.08"
Maximum usable face:
- Width: 11.75"
- Height: 7"
Maximum cutting area:
- Width: 11"
- Height: 6.125"
Fits models
- Furuno: GP150D, GP1670(F), GP1850F, GP1870(F),GP7800F
- Garmin: 527, 547, 620, 640, 720, 721, 740, 741, 4008, 4208, 5008, 5208, 70s
- Humminbird: 500, 700, 800, 900 series
- Lowrance: HDS-5, HDS - 5M, HDS-5X, HDS-7, HDS-7M (same for Gen2)
- Raymarine: e7, e7D, A50, A50D, A57D, e9, c95, e95, A70, A70D
- Simrad: NSS7
- Sitex: EC5,EC7, SNS 700
- Standard horizon: CPN700i, CP190i, CP390i, CPF190i, CPF390i
The SPOD is a pod for sailboats and catamarans. Developing the Seaviews modular assembly concept, Seaview developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chart plotter or instrument on the market. Seaview designed the SPOD so that the back of each box has a continuous radius that matches the stainless steel pod clips. The result is an accurate viewing angle during installation for the customer. The bracket fits the majority of steering racks from Jefa, Whitlock and Edson, and can be customized for other systems.
Stainless Steel Clamps
The stainless steel clamps will attach to 1", 1.125" and 1.25" rails.
Security screws are used to hold the SPOD together. A gasketWaterproof is used to prevent water from entering the interior of the pod, while a GORE-TEX ventilation vent allows hot air to escape without letting water in.
Optional accessory stroller
One of the unique capabilities of this SPOD is the ability to add optional side pods (SP1BOX). Currently no other sailboat pod on the market has this feature. Depending on the size of the pod box you choose, you can mount one to four of these accessory pods. This offers the customer many flexible solutions to optimize their configuration.
The usable area of this Seaview Sail Pod is 11.75 x 7 and the maximum cutout area is 11 x 6.125. Comes with two highly polished stainless steel clips. The back of this sail pod...
PRODUCT ID: 50724
SKU: NVN-50724
CSKU: CWR-50724
REWRITE: 61835-seaview-spod-sail-pod-uncut -small -mfd
MPN: SP2S
UPC: 839662008839
ASIN: B00E9M37W8
WSKU:
SSKU: SVW-SP2S
KSKU: SVWSP2S
GSKU:
MSKU:
LSKU:
NAME: Seaview SPOD Uncut Sail Pod Small Screen MFD
NAME_EX: SEAVIEW SPOD SAIL POD BOX SP2S UNCUT SMALL MFD 2 SS CLAMPS
PTITLE: Seaview SPOD Sail Pod Uncut Small Screen MFD
TYPE: Boat fittings | Display Stands
SELLER: Seaview
ELECTRONICS> MARINE ELECTRONICS
Sports
Seaview SP2S Sail Pod for Multifunction Displays and Plotters, White, SP2S
Title Google: Seaview Sailboat Instrument Pod SP2S
Sports
Gtags:
11.7 max screen inches |
GSpecs:
Seaview SPOD Sail Pod Uncut Small MFD Display Product description
Seaview SP2S Small MFD Sailboat PodThe SPOD is a pod for sailboats and catamarans. There are five different box sizes to fit almost any chartplotter or instrument on the market. Seaview designed the SPOD so that the back of each box has a continuous radius that matches the stainless steel pod clips. The result is a precise viewing angle defined during installation for the customer. The module fits the majority of steering racks from Jefa, Whitlock and Edson and can be customized for other systems. Stainless steel clamps attach to 1", 1.125" and 1.25" rails. Security screws are used to hold the SPOD together. A waterproof gasket is used to keep water out inside the pod, while a GORE-TEX ventilation vent allows hot air to escape without letting water in. Face used.Maximum cutting area (11.75" × 7")Maximum cutting area (11" × 6.125")Can use up to 2 optional accessory pods (part #SP1BOX)
Seaview SP2S AttributesSeaview SPOD Sailing Pod Box
Small Uncut Sailing Pod with 2 S.S. Clamps
Overall dimensions:
- Width: 12.305"
- Height: 7.555"
- Depth: 5 .08"
Maximum usable face:
- Width: 11.75"
- Height: 7"
Maximum cutting area:
- Width: 11"
- Height: 6.125"
Fits models
- Furuno: GP150D, GP1670(F), GP1850F, GP1870( F),GP7800F
- Garmin: 527, 547, 620, 640, 720, 721, 740, 741, 4008, 4208, 5008, 5208, 70s
- Humminbird: 500, 700, 800, 900 series
- Lowrance: HDS-5, HDS-5M, HDS-5X, HDS-7, HDS-7M (same for Gen2)
- Raymarine: e7, e7D, A50,A50D, A57D, e9, c95, e95, A70, A70D
- Simrad: NSS7
- Sitex: EC5, EC7, SNS 700
- Standard horizon: CPN700i, CP190i, CP390i, CPF190i, CPF390i
The SPOD is a pod for sailboats and catamarans. Expanding on Seaviews modular assembly concept, Seaview developed a sailboat pod design with a similar concept. There are five different box sizes to fit almost any chartplotter or instrument on the market. Seaview designed the SPOD so that the back of each box has a continuous radius that matches the stainless steel pod clips. The result is an accurate viewing angle during installation for the customer. The bracket fits the majority of steering racks from Jefa, Whitlock and Edson, and can be customized for other systems.
Stainless Steel Clamps
The stainless steel clamps will attach to 1", 1.125" and 1" rails.25".
Security screws are used to hold the SPOD together. A waterproof seal is used to prevent water from entering the interior of the pod, while ventilation GORE-TEX vent allows hot air to escape without letting water in.
Optional accessory pod
One of Unique capabilities of this SPOD is the ability to add optional side modules (SP1BOX) Currently, no other sailboat pod on the market has this feature. Depending on the size of the pod box you choose. can mount one to four of these accessory pods This offers the customer many flexible solutions to optimize their setup
The usable surface area of this Seaview Sail Pod is 11.75 x 7 and the maximum cutout area. is 11 x 6.125 Comes with two highly polished stainless steel clips The back of this sailing pod...
Frequently asked questions (FAQ) about.of the Seaview SPOD Sail Pod Uncut Small MFD Display Who is the Seaview?
How to describe the Seaview SPOD Sail Pod Uncut Small MFD Display?
Is it cut or uncut?
How to mount or which is the mounting style of the MFD Seaview SPOD Sail Pod small display uncut?
What is the usable surface area size of the product?
Who is the Seaview? Working closely with all major electronics manufacturers, Seaview offers an innovative range of high quality products for powerboats and sailboats, recreational and commercial. Seaview has added a hard anodizing process before powder coating to ensure superior durability and corrosion protection. Seaview is dedicated to providing quality products with the highest level of service in the industry. How to describe the Seaview SPOD Sail Pod Uncut Small Screen MFD? The usable surface area of this Sail PodSeaviewis 11.75 x 7 and the maximum clipping area is 11 x 6.125. Comes with two highly polished stainless steel clips. The back of this sailing pod... Is it cut or uncut? Uncut
- How to mount or what is the mounting style of the Uncut MFD Small Display Seaview SPOD Sail Pod? PedestalHow big is the usable surface area of the product? 11.75"L x 7"H
Save $71when you purchase the Small MFD Uncut Seaview SPOD Sail Podfor only $284from NVN Marine! Same day dispatch before 3 p.m. Seaview SPOD Sail Pod Uncut Small Screen Technical MFDSpecifications
Type: | Boat Equipment | Display Stands |
---|---|
Seller: | Seaview |
Weight: | 6.2 lbs |
Cut/Uncut: | Uncut |
Mounting Style: | Base |
Usable side: | 11.75"W x 7"H |
Product Brochure: | Download PDF |
Shipping Weight: | 6.2 lbs |
---|---|
Box sizes: | 6.00 (h) x 8.00 (w) x 14.00 (w) |
Cubic feet: | 672.0 |
Returnable: | Yes |
For detailed shipping terms, please see our Shipping Policy and you You can find our returns and refund policy here.
- Seaview SPOD Sail Pod single instrument uncut
- Seaview SPOD Sail Pod Box Uncut Medium for MFD Display
- Seaview SPOD Sail Pod Box Uncut for Large Screen MFD
- Seaview SPOD Sail Pod Box Uncut for 3 Instruments
- Seaview SP5S1 Rail Pod - uncut 13.875" x 4.125"
- Seaview SP3S1 Rail Pod - uncut 12.938" x 8.125"
- Seaview SP2S1 Rail Pod - uncut 11" x 6.125"