Sale!

Victron Blue Smart IP22 24VDC 8A 1 Bank 120V Charger - Dry Mount

$50

SKU: Victron Blue Smart IP22 24VDC 8A 1 Bank 120V Charger - Dry Mount
Category:

Victron Blue Smart IP22 24VDC 8A 1 Bank 120V Charger - Dry Mount Electrical

Blue Smart IP22 24V DC 8A 1 Bank 120V Charger - Dry Mount

The Blue Charger Smart IP22 is a professional battery charger with integrated Bluetooth. The Blue Smart IP22 charger can be used on devices in your workshop and on motor vehicles, such as (conventional) cars; motorcycles; boats and campers. 

Bluetooth Smart

The Blue Smart IP22 charger is the wireless solution for monitoring voltage and current, changing settings and updating the charger when new features are available. .

High efficiency

With an efficiency of up to 94%, these chargers generate up to four times less heat compared to standard of the industry. And once the battery is fully charged, power consumption is reduced to 0.5 watts, five to ten times better than the industry standard.

6-step adaptive charging algorithm: test - volume - absorption - recondition - float - storage

The Blue SMart Charger has controlled "adaptive" battery management by microprocessor. The adaptive function will automatically optimize the charging process in relation to how the battery is used.

Storage mode: less maintenance and aging when the battery is not used

Storage mode starts whenever the battery has not been discharged for 24 hours. In storage mode, the float voltage is reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is brought back to absorption level to "equalize" the battery. This feature prevents electrolyte stratification and sulfation, a major cause of early failureof the battery.

Also charges Li-ion batteries

Li-ion batteries are charged with a simple mass absorption and floating.

Fully discharged battery recovery function

Will initiate charging even if the battery has been discharged. charged to zero volts. Will reconnect to a completely discharged Li-ion battery with an internal disconnect function.

NIGHT and LOW Setting

In NIGHT or LOW mode, the output the current is reduced as much as possible. 50% of rated power and the charger will be completely silent. NIGHT mode ends automatically after 8 hours. LOW mode can be manually interrupted.

Overheat protected

Output current will decrease as temperature increases up to 50°C , but the Blue Smart Charger will not fail.

Eleven LEDs for status indication

Charging algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to adjust: NORMAL (14.4V) / HIGH (14.7V) / RECONDITION / LI-ION.

Specifications:

  • Input voltage range: 100 - 130 VAC
  • Charging current, normal mode: 8/12/16 A
  • Charging current, NIGHT or LOW: 4/6 /8 A
  • Efficiency: 94%
  • Power to empty Consumption: 0.5 W
  • Frequency: 45 – 65 Hz
  • Number of outputs: 1
  • 'Absorption' charging voltage: Normal: 28.8 V High: 29.4V Li-ion: 28.4V
  • 'Float' charging voltage : Normal: 27.6V High: 27.6V Li-ion: 27.0V
  • Charging voltage ' Storage: Normal: 26.4V High: 26.4V Li-ion: 27.0 V
  • Charging algorithm: 6-step adaptive
  • Can be used as a power supply: yes
  • Protection: Reverse polarity of the battery (fuse). Output short circuit, overheating
  • Temp. of operationt. Range: -20 to +50°C
  • Humidity (non-condensing): Max 98%
  • Bluetooth: Frequency: - 2402-2480MHz / Power: -4dBm

Housing specifications:

  • Material and color: Aluminum (blue RAL 5012)
  • Battery connection: Terminals screw 13 mm^2 / AWG6
  • 230 V AC Connection: 1.5 meter cable with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ)
  • Protection category: IP22
  • Weight: 1.3 kg
  • Dimensions (h x w x d): 235x 108 x 65 mm

Standards:

  • Safety: EN 60335-1, EN 60335-2-29
  • Emission: EN 55014-1, EN 61000-6-3, EN 61000-3-2
  • Immunity: EN 55014-2, EN 61000-6-1, EN 61000
  • Automotive E4-10R
Please contact your reseller for any returns, repairs, or support issues related to this product.
Please contact your reseller for any return, repair, or support issues.support information related to this product.


PRODUCT ID: 99770
SKU: NVN-99770
CSKU: CWR-99770
REWRITE: 110881-victron- blue-smart-ip22-24vdc-8a-1
MPN: BPC240845102
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU: MSKU:
LSKU:
NAME: VICTRON BLUE SMART IP22 24VDC 8A 1 BANK 120V CHARGER
NAME_EX:
PTITLE: Victron Blue Smart IP22 24VDC 8A 1 BANK 120V Charger - Dry Mount
TYPE: Electric | Battery Chargers
SELLER: Victron Energy
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES




Gtags:

GSpecs:

Blue Smart IP22 24VDC 8A 1 Bank 120V Charger - Dry Mount Product Description

Blue Smart IP22 24VDC 8A 1 Bank 120V Charger - Dry Mount

The charger Blue Smart IP22 is a professional battery charger with integrated Bluetooth. The Blue Smart IP22 charger can be used on devices in your workshop and on motor vehicles, such as (conventional) cars; motorcycles; boats and campers. 

Bluetooth Smart

The Blue Smart IP22 charger is the wireless solution for monitoring voltage and current, changing settings and updating the charger when new features are available. .

High efficiency

With an efficiency of up to 94%, these chargers generate up to four times less heat compared to standard of the industry. And once the battery is fully charged, the power consumption is reduced to 0.5 watts, or five to dix times better than the industry standard.

6-step adaptive charging algorithm: test - volume - absorption - recondition – float – storage

The Blue Smart Charger features microprocessor-controlled "adaptive" battery management. The adaptive function will automatically optimize the charging process in relation to how the battery is used.

Storage mode: less maintenance and aging when the battery is not used

Storage mode starts whenever the battery has not been discharged for 24 hours. In storage mode, the float voltage is reduced to 2.2 V/cell (13.2 V for a 12 V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is brought back to absorption level to "equalize" the battery. This feature prevents electrolyte stratification and sulfateion, a major cause of early battery failure.

Also charges Li-ion batteries

Li-ion batteries are charged with a simple float-absorption-volume algorithm.

Fully discharged battery recovery function

Will initiateI ate while charging even if the battery has been discharged to zero volts. Will reconnect to a completely discharged Li-ion battery with an internal disconnect function.

NIGHT and LOW Setting

In NIGHT or LOW mode, the output the current is reduced as much as possible. 50% of rated power and the charger will be completely silent. NIGHT mode ends automatically after 8 hours. LOW mode can be manually interrupted.

Overheat protected

Output current will decrease as temperature increases up to 50°C , but the Blue Smart Charger will not fail.

Onze LED for status indication

Charging algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY. MODE button to adjust: NORMAL (14.4V) / HIGH (14.7V) / RECONDITION / LI-ION.

Specifications:

  • Input voltage range: 100 - 130 VAC
  • Charging current, normal mode: 8/12/16 A
  • Charging current, NIGHT or LOW: 4/6 /8 A
  • Efficiency: 94%
  • No-load power consumption: 0.5 W
  • Frequency: 45 - 65 Hz
  • Number of outputs: 1
  • 'Absorption' charging voltage: Normal: 28.8V High: 29.4V Li-ion: 28.4V
  • 'Floating' charging voltage: Normal: 27.6V High: 27.6V Li-ion: 27.0V
  • 'Storage' charging voltage: Normal: 26.4V High: 26.4V Li-ion: 27.0V
  • Charging algorithm: 6 -stage adaptive
  • Can be used as a power supply: yes
  • Protection: reverse polarity of the battery (fuse). Output short circuit, overloaduffe
  • Temp. of operation. Range: -20 to +50°C
  • Humidity (non-condensing): Max 98%
  • Bluetooth: Frequency: - 2402-2480MHz / Power: -4dBm

Housing specifications:

  • Material and color: Aluminum (blue RAL 5012)
  • Battery connection: Terminals screw 13 mm^2 / AWG6
  • 230 V AC Connection: 1.5 meter cable with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ)
  • Protection category: IP22
  • WeWeight: 1.3 kg
  • Dimensions (h x w x d): 235 x 108 x 65 mm

Standards:

  • Safety: EN 60335-1, EN 60335-2-29
  • Emission: EN 55014-1, EN 61000-6-3, EN 61000-3-2
  • Immunity: EN 55014-2, EN 61000-6-1, EN 61000
  • Automotive E4-10R
Please contact your reseller for any returns, repairs, or support issues related to this product.Please contact your reseller for anyreturn, repair or support issue related to this product.



Frequently Asked Questions (FAQ) about VICTRON BLUE SMART IP22 24VDC 8A 1 BANK 120V CHARGER Who is Victron Energy?
Who is Victron Energy? Victron Energy is a global company renowned for its technical innovation, reliability and build quality. Victron products, which excel at efficiently combining two or more separate energy sources, are recognized internationally as the professional choice for resilient energy storage systems. Victron products include sine wave inverters, sine wave inverters/chargers, battery chargers, DC/DC converters, transfer switches, battery monitors and much more.

Save $22 when you purchase the Victron Blue Smart IP22 24VDC 8A 1 Bank 120V Charger - Dry Mount for only 126 $ from NVN Marine! Same day dispatch before 3 p.m. Victron Blue Smart IP22 24VDC 8A 1 Bank 120V Charger - Dry Mount Videos Victron Blue Smart IP22 24VDC 8A 1 Bank 120V Charger - Technical Specifications
Type:

Electric | Battery chargers

Supplier:

Victron Energy

Charger Input - Voltage:

120V

Charger Output - Amps:

8A

Charger output voltage:

24V

Charging banks:

1

Portable:

No

User Guide:

Download PDF

Product manual:

Download PDF

Product brochure:

Download PDF

Victron Blue Smart IP22 24VDC 8A1 Bank 120V Charger - Dry Mount User Reviews Victron Blue Smart IP22 24VDC 8A 1 Bank 120V Charger - Dry Mount Shipping & Return

For detailed shipping policy, please see our shipping policy 'shipping and you can find our return and refund policy here.