Victron MultiPlus 24/2000 - 50-50 - 120V - VE.Bus UL Approved Electrical

MultiPlus 24/2000 - 50-50 - 120 V - VE.Bus UL Approved

The MultiPlus, as the name suggests, is an inverter and charger combined into one stylish device. pack. Its many features include a true sine wave inverter, adaptive charging, PowerAssist hybrid technology and several system integration features.

Two AC outputs

The main output has uninterrupted functionality. The MultiPlus supports powering connected loads in the event of a grid outage or when shore/generator power is disconnected. This happens so quickly (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without interruption.

The second output is active only when alternating current is available on the MultiPlus input. Loads that should not discharge the battery, such as a heaterwater for example, can be connected to this output (a second output is available on models rated at 3 kVA and above).

Virtually unlimited power thanks to parallel operation

Up to six Multis can operate in parallel to achieve higher power output. Six 24/3000/70 units, for example, provide 15 kW/18 kVA output power with a load capacity of 420 A.

Three-phase capacity

In addition to parallel connections, three units can be configured for three-phase output. But that's not all: with three strings of six parallel units, a 45 kW / 54 kVA three-phase inverter and 1260 A charger can be built.

Split phase options

Two units can be stacked to provide 120-0-120 V, and additional units can be paralleled up to a total of 6 units per phase, to provide juicethan at 30 kW / 36 kVA split-phase power. Alternatively, a split-phase AC source can be obtained by connecting the Victron autotransformer (see data sheet on www.victronenergy.com) to a "European" inverter programmed to provide 240 V / 60 Hz.

Power Control – Manage a limited generator, shore side or Grid Power

The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore power (nearly 20 A per 3 kVA MultiPlus at 120 VAC). With the Multi Control Panel, a maximum generator or shore current can be set. The MultiPlus will then take into account other AC loads and use whatever is extra for charging, preventing overloading of the generator or shore power.

Powerassist - Increase Capacity shore power or generator This feature bringsthe principle of PowerControl has an additional dimension. It allows MultiPlus to supplement the capacity of the alternative source. Where peak power is often only required for a limited period, the MultiPlus will ensure that insufficient power from the dock or generator is immediately compensated by battery power. When the charge decreases, available energy is used to recharge the battery.

Four-level, dual-bank adaptive chargerBattery charging

Output Main provides powerful charging to the battery system using advanced "adaptive charging" software. The software adjusts the automatic three-stage process based on battery condition and adds a fourth stage

for long periods of trickle charging. The adaptive charging process is described in more detail on the Phoenix charger datasheet and on the Vi websitectron under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starting battery.

The system configuration n It's never been easier

After installation, the MultiPlus is ready to go. If settings need to be changed, this can be done in minutes using a DIP switch adjustment procedure. Even parallel and three-phase operations can be programmed with DIP switches: no computer needed!

Alternatively, VE.Net can be used instead of DIP switches. And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several new advanced features.

Specifications:

PowerControl: Yes
PowerAssist: Yes
Comtransfer mutator (A): 50
Parallel and three-phase operation: Yes

Inverter specifications:

Input voltage range (V DC): 9.5 – 17 V 19 – 33 V
Output: Output voltage: 120 VAC, ± 2% / Frequency 60 Hz ± 0.1%
Continuous output power at 25°C (VA): 2000
Continuous output power at 25°C (W): 1600
Continuous output power at 40°C (W): 1450
Continuous output power at 65°C (W): 1100
Maximum power (W): 4,000
Maximum efficiency (%): 92 / 94
No-load power (W): 9 / 11
No-load power in AES mode (W): 7 / 8
No-load power in search mode (W): 3/4

Charger specifications:

AC input: Input voltage range: 95-140 VAC / Input frequency: 45 – 65 Hz / Power factor: 1
Voltage absorption load (V DC): 14.4 /28.8
Charging voltage float (V DC): 13.8 / 27.6
Storage mode (V DC): 13.2 / 26.4
House battery charging current (A): 80 / 50
Charging current Starter battery (A): 4
Temperature sensor Battery Capacity: Yes

General Specifications:

Auxiliary Output: N.A.
Programmable Relay: Yes (1x)
Protection: a - g
VE.Bus Communication port: for parallel and three-phase operation, remote monitoring and system integration.
Com. Port: N.A.
Remote On/Off: Yes
Operating Temperature Range: -40 - +65°C / -40 to 150°F (fan assisted cooling) , humidity (non-condensing) max 95%

Enclosure specifications:

Common features: Material and color: aluminum ( blue RAL 5012) / Protection category: IP 21
ConBattery connection: M8 bolts
120 VAC connection: 6 AWG (13 mm²) screw terminal
Weight: 13 kg / 25 lbs .
Dimensions (hxwxd in mm): 520 x 255 x 125 mm / 20.5 x 10.0 x 5.0 in.

Standards

Safety: UL 458, EN-IEC 60335-1, EN-IEC 60335-2-29
Emission, immunity: EN-IEC 61000- 3-2/3-3/, EN-IEC 61000-6- 1/6-2/6-3
Can be adjusted to 50 HZ
Protection key: short -output circuit, overload, battery voltage too high, battery voltage too low, temperature also high, 150 VAC on inverter output, input voltage ripple is too high
Non-linear charging, 3:1 crest factor
Up to 75°F ambient temperature
Turns off when no external AC source is available
Programmable relay which can, among other things, be set for a general alarm including DC undervoltage or g start/stop functiongenerator set / AC rating: 120V/4A / DC rating: 4A up to 35VDC, 1A up to 60VDC / A.o. to communicate with a lithium-ion battery BMS

Please contact your dealer for any return, repair, or support issues related to this product.

PRODUCT ID: 99865
SKU: NVN-99865
CSKU: CWR-99865
REWRITE: 110976-victron-multiplus-24-2000-50-50-120v
MPN: PMP242200102
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: VICTRON MULTIPLUS 24/2000 50-50 120V VE.BUS UL APPROVED
NAME_EX:
PTITLE: Victron MultiPlus 24/2000 - 50 -50 - 120V - VE.Bus UL Approved
TYPE: Electric | Charger/Inverter Combos
SELLER: Victron Energy
ELECTRONICS> ELECTRONIC ACCESSORIES> POWER

Gtags:

GSpecs:

Victron MultiPlus 24/2000 - 50-50 - 120V - VE.Bus UL Approved Product description

MultiPlus 24/2000 - 50-50 - 120V - VE.Bus UL Approved

The MultiPlus, as the name suggests, is a combined inverter and charger in one sleek package. Its many features include a true sine wave inverter, adaptive charging, PowerAssist hybrid technology and several system integration features.

Two AC outputs

The second output is active only when alternating current is available on the Mult inputiPlus. Loads that should not drain the battery, such as a water heater for example, can be connected to this output (a second output is available on models rated 3 kVA and above).

Virtually unlimited power thanks to parallel operation

Up to six Multis can operate in parallel to achieve higher power. to go out. Six 24/3000/70 units, for example, provide 15 kW/18 kVA output power with a load capacity of 420 A.

Three-phase capacity

Split phase options

Two units can be stacked to provide 120-0-120 V, and additional units can be addede paralleled up to a total of 6 units per phase, to provide up to 30 kW / 36 kVA of split-phase power. Alternatively, a split-phase AC source can be obtained by connecting the Victron autotransformer (see technical sheet on www.victronenergy.com) to a "European" inverter programmed to supply 240 V / 60 Hz.

Power control - Manage a power supply limited from the generator, on the dock side or on the network

Powerassist - Increasethe capacity of shore power or generator This feature takes the principle of PowerControl to an additional dimension. It allows MultiPlus to supplement the capacity of the alternative source. Where peak power is often only required for a limited period, the MultiPlus will ensure that insufficient power from the dock or generator is immediately compensated by battery power. When the charge decreases, available energy is used to recharge the battery.

Four-stage adaptive charger and dual-bank battery charging

The Main output provides powerful charging to the battery system using advanced "adaptive charging" software. The software adjusts the automatic three-stage process based on battery condition and adds a fourth stage

for long periods of trickle charging. The adaptive charging process isdescribed in more detail on the Phoenix charger datasheet and on the Victron website under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starting battery.

The system configuration n It's never been easier

Alternatively, VE.Net can be used instead of DIP switches. And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several new advanced features.

Specifications:

PowerControl: Yes
PowerAssist: Yes
Transfer switch (A): 50
Parallel and three-phase operation: Yes

Inverter specifications:

Input voltage range (V DC ): 9.5 – 17 V 19 – 33 V
Output: Output voltage: 120 VAC, ± 2% / Frequency 60 Hz ± 0.1%
Output power continuous output power at 25°C (VA): 2000
Continuous output power at 25°C (W): 1600
Continuous output power at 40°C (W): 1450
Continuous output power at 65°C (W): 1100
Maximum power (W): 4000
Maximum efficiency (%) : 92 / 94
No-load power (W): 9 / 11
No-load power in AES mode (W): 7/8
No Load Power in Search Mode (W): 3/4

Charger Specifications:

AC Input: Range input voltage: 95-140 VAC / Input frequency: 45 - 65 Hz / Power factor: 1
Charging voltage absorption (V DC): 14.4 / 28.8
Floating charging voltage (V DC): 13. 8 / 27.6
Storage mode (V DC): 13.2 / 26.4
House battery charging current (A): 80/50
Starting battery charging current (A): 4
Battery temperature sensor: Yes

General specifications :

Auxiliary output: N.A.
Programmable relay: Yes (1x)
Protection: a - g
VE.Bus Communication Port: For parallel and three-phase operation, remote monitoring and system integration
General purpose Com. Port: N.A.
Remote On/Off: Yes
Operating Temperature Range: -40 - +65°C / -40 to 150°F (fan assisted cooling) , humidity (non-condensing) max 95%

Enclosure specifications:

Common specificationsmunes: Material and color: aluminum (blue RAL 5012) / Protection category: IP 21
Battery-Connection: M8 bolts
120 V AC-Connection: 6 AWG screw terminal (13 mm²)
Weight: 13 kg / 25 lbs.
Dimensions (hxwxd in mm): 520 x 255 x 125 mm / 20. 5 x 10.0 x 5.0 in.

Standards

Safety: UL 458, EN-IEC 60335- 1, EN-IEC 60335-2-29
Emission, immunity: EN-IEC 61000-3-2/3-3/, EN-IEC 61000-6-1/6-2/6- 3
Can be set to 50 HZ
Protection key: output short circuit, overload, battery voltage too high, battery voltage too low, temperature too high , 150 VAC on inverter output, input voltage ripple too high
Non-linear load, crest factor 3:1
Up to 75° Ambient F
Turns off when no external AC source is available
Programmable relay that can, among other things, be set for a general alarmale, including DC undervoltage or generator set start/stop function / AC current: 120 V/4 A / Continuous current: 4 A up to 35 V DC, 1 A up to 60 VDC/A.o. to communicate with a lithium-ion battery BMS

Please contact your dealer for any return, repair, or support issues related to this product.

Save $138 on the purchase of the Victron MultiPlus 24/2000 - 50-50 - 120 V - VE.Bus UL approved for only $785 from NVN Marine! Free same day delivery before 3 p.m. Victron MultiPlus 24/2000 - 50-50 - 120V - VE.Bus UL Approved Technical Specifications

Type:	Electric \| Charger/Inverter Combos
Supplier:	Victron Energy
User Guide:	Download PDF
Product Manual:	Download itPDF
Product brochure:	Download PDF

Victron MultiPlus 24/2000 - 50-50 - 120V - VE.Bus UL Approved User reviewsVictron MultiPlus 24/2000 - 50-50 - 120V - VE.Bus UL Approved Shipping and returns

To know the detailed shipping policy, please see our Shipping Policy and you can find our return and refund policy here.