Blue Sea 7620100 ML ACR 12V 500A Load Relay with Deutsch Connector Electrical

ACR 7620100 ML 12V 500A Charging Relay with Deutsch Connector

500A magnetic latching (bi-stable) relay automatically combines batteries during charging and isolates the batteries during discharge and engine starting.

Features:

Automatically manages the charging of two large battery banks
Allows paralleling of battery banks for Emergency Starting
500 continuous amps to support high efficiency alternators
Magnetic Latch (ML) ): The ACR draws very low current (<40mA to monitor terminal voltage) in the "ON" state. or "OFF", and draws moderate current for a very short time when changing state.
Dual detection: detects the load on both battery banks
Starting Isolation (SI) - can be configured for temporary isolation of house loads from the motor circuitduring motor startup to protect sensitive electronics.
Motor Isolation (EI) – can be configured to isolate two motors while both are operating to protect motor electronics and maximize engine output alternator
Senses the load on two battery banks
LED output to remotely indicate when batteries are combined, isolated, in voltage lockout or starting or isolating the engine
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
7/8" (22mm) stud length accepts multiple terminals
Silver alloy contacts provide high reliability for switching active loads.
Label recesses for circuit identification

Specifications:

Control circuit connection: Deutsch DTM
Rated voltage: 12 VDC
Manual control: no
Motor isolation: yes
Mounting: #10
Starting aid: Yes
Insulation start: Yes
Change of state operating current: <7.0 A
Terminal stud torque: 15.82 Nm (140 in. lb.)
Continuous current: 500 A
Intermittent current rating: 700 A (5 min)
30 second start current: 1450 A DC
>Cable size to meet ratings: 2x (4/0)
Switching current under voltage: 300 A at 12 VDC
Main control switch capacity: No
Switching Cycles: 100,000
Terminal Ring Diameter Clearance: 1.18" (29.97 mm)
Stud Length Terminal: 1.50" (38.1 mm)
Terminal Stud Size: 3/8" - 16 (M10)

This product can expose you toto chemicals including di(2-ethylhexyl) phthalate (dehp), known to the State of California to cause cancer, birth defects, or other reproductive harm For more information, visit P65Warnings .ca.gov.

ACR 7620100 ML Charging Relay with Deutsch Connector 12V 500A 500A Magnetic Latching (Bistable) Relay automatically assembles the battery during charging and isolates the battery when discharging and starting the motor Function: automatic management...
PRODUCT ID: 81415
SKU: NVN-81415
CSKU: CWR-.81415
REWRITE: 92526-blue-sea- 7620100-ml-acr-load-relay
MPN: 7620100
UPC: 632085762018
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU :
LSKU:
NAME: Blue Sea 7620100 ML ACR Load relay 12 V 500 A with Deutsch connector
NAME_EX: BLUE SEA 7620100 ML ACR LOAD RELAY 12 V 500 A
PTITLE: Blue Sea 7620100 ML ACR Load Relay 12V 500A withDeutsch connector
TYPE: Electric | Battery Management
SELLER: Blue Sea Systems
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Google Title : Blue Sea Systems, 7620100-BSS, 12V Auto Load RELAY

Gtags:

GSpecs:

Blue Sea 7620100 ML ACR Load Relay 12V 500A with Deutsch Connector Product Description

7620100 ML ACR Load Relay 12V 500A with Deutsch Connector

Magnetic Latch 500 A (bi-stable) the relay automatically combines the batteries during charging and isolates the batteries when discharging and when starting the engine.

Features:

Automatically manages the charging of two large battery banks
Allows paralleling of battery banks for emergency starting
500 continuous amps for support high efficiency alternators
Magnetic Latch (ML): The ACR draws very low current (<40 mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws moderate current for a very short time when changing state
Dual detection: detects the charge on both batteries
li>
Start isolationage (SI): can be configured to temporarily isolate house loads from the motor circuit during engine starting to protect sensitive electronic components
Eng.Isolation ine (EI): can be configured to isolate two motors while both are running to protect the motor electronics and optimize alternator output.
Detects the load on two battery banks
Remote LED output indicates when batteries are combined, isolated, voltage locked, or starting or motor isolation
3/8"-16 tin-plated copper studs for conductivity and resistance to maximum corrosion
7 8" (22mm) stud length accepts multiple cable terminals
Silver alloy contacts provide high reliability for switching active loads
Recesses for labels for circuit identification

Specifications :

Control circuit connection: Deutsch DTM
Rated voltage: 12 V DC
Manual control: No
Motor insulation: Yes
Mounting: #10
Starting aid: Yes
Starting isolation: Yes
Operating current in amperage when changing state: <7.0 A
Terminal stud torque: 15.82 Nm (140 in-lb)
ContinuedIninual note : 500 A
Intermittent rating: 700A (5 min)
30 second start-up rating: 1450 A DC
Cable size to meet at rated ratings: 2x (4/ 0)
Switching current under voltage: 300 A at 12 VDC
Main control switch capacity: no
Switching Cycles: 100,000
Terminal Ring Diameter Clearance: 1.18" (29.97 mm)
Terminal Stud Length: 1.50" ( 38.1 mm)
Terminal Stud Size: 3/8" - 16 (M10)

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information,

ACR 7620100 ML Charging Relay with Deutsch Connector 12V 500A Magnetic Latching Relay (Bistable) 500A Automatically Assembles Battery during charging and isolates it. the battery when discharging and starting the engine. Function: automatic management...

Frequently asked questions (FAQ) about the Blue Sea 7620100 ML ACR 12 V 500 A charging relay with Deutsch connector Who is Blue Sea Systems?
How to describe the Blue Sea 7620100 ML ACR 12 V 500 A load relay with Deutsch connector?
Who is Blue Sea Systems? Blue Sea Systems is committed to improving marine electrical products and systems, such aspanels, circuit breakers, connectors and insulators. Blue Sea aims to satisfy its distributors, resellers and ultimately its retail customers by designing and manufacturing electrical products designed to withstand the rigors of the marine environment. How to describe the Blue Sea 7620100 ML ACR 12 V 500 A load relay with Deutsch connector? 7620100 ML ACR Charging Relay with Deutsch Connector 12V 500A 500A Magnetic Latching (Bistable) Relay automatically assembles the battery during charging and isolates the battery during discharging and engine starting. Function: automatic management...

Save $93 when you buy the Blue Sea 7620100 ML ACR 12V 500A charging relay with Deutsch connector for only $199 at NVN Marine! Same day dispatch before 3 p.m. Blue Sea 7620100 ML ACR 12 V 500 A load relay with Deutsch connector Technical specifications

Type:	Electric \| Battery Management
Vendor:	Blue Sea Systems
Product Installation:	Download PDF

Blue Sea 7620100 ML ACR Load Relay 12V 500A with Deutsch Connector User ReviewsBlue Sea 7620100 ML ACR 12V 500A Charging Relay with Deutsch Connector Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our returns and refund policy here.