Blue Sea 7621100 ML ACR Load Relay 24V 500A with Deutsch Connector Electrical

ACR 7621100 ML 24V 500A Charging Relay with Deutsch Connector

500A magnetic latching (bi-stable) relay automatically combines batteries during charging and isolates the batteries during discharge and engine starting.

Features:

Automatically manages the charging of two large battery banks
Allows paralleling of battery banks for Emergency Starting
500 continuous amps to support high efficiency alternators
Magnetic Latch (ML) ): The ACR draws very low current (<40mA to monitor terminal voltage) in the "ON" state. or "OFF", and draws moderate current for a very short time when changing state.
Dual detection: detects the load on both battery banks
Starting Isolation (SI) - can be configured for temporary isolation of house loads from the motor circuitduring motor startup to protect sensitive electronics.
Motor Isolation (EI) – can be configured to isolate two motors while both are operating to protect motor electronics and maximize engine output alternator
Senses the load on two battery banks
LED output to remotely indicate when batteries are combined, isolated, in voltage lockout or starting or isolating the engine
3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
7/8" (22mm) stud length accepts multiple terminals
Silver alloy contacts provide high reliability for switching active loads.
Label recesses for circuit identification

Specifications:

Control circuit connection: Deutsch DTM
Rated voltage: 24 VDC
Manual control: no
Motor isolation: yes
Mounting: #10
Starting aid: Yes
Insulation start: Yes
Change of state operating current: <7.0 A
Terminal stud torque: 15.82 Nm (140 in. lb.)
Continuous current: 500 A
Intermittent current rating: 700 A (5 min)
30 second start current: 1450 A DC
>Cable size to meet ratings: 2x (4/0)
Switching current under voltage: 300 A at 12 VDC
Main control switch capacity: No
Switching Cycles: 100,000
Terminal Ring Diameter Clearance: 1.18" (29.97 mm)
Stud Length Terminal: 1.50" (38.1 mm)
Terminal Stud Size: 3/8" - 16 (M10)

Blue Ocean System 81417 Blue Ocean System 7621100 7621100 ML ACR load relay 24 V 500 A with Deutsch connector 500 A The glass relayMagnetic (bistable) uage automatically assembles the battery during charging and isolates the battery during discharging and engine starting. --The Magnetic Latch (ML) and mdash-ACR draw very little current (both batteries have dual induction charging-mdashsense). - Start Isolation (SI) can be configured &mdash to temporarily isolate the house load from the motor circuit during motor starting. To protect sensitive electronic equipment. Motor Isolation (EI) can be configured to isolate both motors when both motors are running. Works to protect the motor electronics and maximize alternator output - Sensing the load on both batteries - LED output remotely indicates when to combine, isolate, voltage lock state or motor start or isolate state. Tin-plated copper studs provide maximum conductivity and corrosion resistance. LThe 7/8 (22mm) stud length accommodates multiple cables. Terminals - Silver alloy contacts provide high reliability for switching live loads - Marking notches are used for circuit identification - Specifications - Control circuit connection - Voltage rating Deutsch DTM - Manual override 24 V DC - No motor insulation - Yes - Installation. #10 starting aid yes - starting isolation yes - Average operating current terminal torque when changing state is 140 inch-pounds (15.82 Nm) rated continuous 500A intermittent rated 700A (5 minutes) starting nominal 30 seconds 1450A to meet nominal DC cable size 2x (4/0) live current switch 300A 12VDC main control switch function non-switching cycle terminal ring diameter 100,000 space r 1.18 ( 29.97 mm) terminal length 1.50 (38.1 mm) terminal size 3/8-16 (M10) BlueSea 7621100 ML 24V 500A ACR Load Relay with Deutsch Connector
PRODUCT ID: 81417
SKU: NVN -81417
CSKU: CWR-81417
REWRITE: 92528-blue-sea-7621100- ml-acr-charger-relay
MPN: 7621100
UPC: 632085762117
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Blue Sea 7621100 ML ACR Load relay 24 V 500 A with Deutsch connector
NAME_EX: BLUE SEA 7621100 ML ACR LOAD RELAY 24 V 500 A
PTITLE: Blue Sea 7621100 ML ACR Load relay 24 V 500 A with Deutsch connector
TYPE: Electric | Battery Management
SELLER: Blue Sea Systems
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Google Title : Blue Sea 7621100 ml ACR Charging RELAY 24V 500A with Deutsch connector

Gtags:

Relays

GSpecs:

Blue Sea 7621100 ML ACR Load Relay 24 V 500 A with Deutsch Connector Product Description

7621100 ML ACR Load Relay 24 V 500 A with Deutsch Connector

Magnetic Latching 500 A (bi-stable) the relay automatically combines the batteries during charging and isolates the batteries when discharging and when starting the engine.

Features:

Automatically manages the charging of two large battery banks
Allows paralleling of battery banks for emergency starting
500 continuous amps for support high efficiency alternators
Magnetic Latch (ML): The ACR draws very low current (<40 mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws moderate current for a very short time when changing state
Dual detection: detects the charge on both batteries
li>
Start isolationage (SI): can be configured to temporarily isolate house loads from the motor circuit during engine starting to protect sensitive electronic components
Eng.Isolation ine (EI): can be configured to isolate two motors while both are running to protect the motor electronics and optimize alternator output.
Detects the load on two battery banks
Remote LED output indicates when batteries are combined, isolated, voltage locked, or starting or motor isolation
3/8"-16 tin-plated copper studs for conductivity and resistance to maximum corrosion
7 8" (22mm) stud length accepts multiple cable terminals
Silver alloy contacts provide high reliability for switching active loads
Recesses for labels for circuit identification

Specifications :

Control circuit connection: Deutsch DTM
Rated voltage: 24 V DC
Manual control: No
Motor insulation: Yes
Mounting: #10
Starting aid: Yes
Starting isolation: Yes
Operating current in amperage when changing state: <7.0 A
Terminal stud torque: 15.82 Nm (140 in-lb)
ContinuedIninual note : 500 A
Intermittent rating: 700A (5 min)
30 second start-up rating: 1450 A DC
Cable size to meet at rated ratings: 2x (4/ 0)
Switching current under voltage: 300 A at 12 VDC
Main control switch capacity: no
Switching Cycles: 100,000
Terminal Ring Diameter Clearance: 1.18" (29.97 mm)
Terminal Stud Length: 1.50" ( 38.1 mm)
Terminal Stud Size: 3/8" - 16 (M10)

Blue Ocean System 81417 Blue Ocean System 7621100 7621100 ML 24V 500A ACR Charging Relay with Deutsch Connector The 500A magnetic latching (bistable) relay automatically assembles the battery during charging and isolates the battery when discharging and starting the engine. --Magnetic Latch (ML) &mdash-ACR draw very low current (both batteries have dual induction charging -mdashsense) - Startup Isolation (SI) can be configured &mdash to temporarily isolate the load from the house of the motor circuit. during engine startup, to protect sensitive electronsElectronic Equipment - Engine Isolation (EI) can be configured to isolate both motors when both motors are running to protect the engine electronics and maximize alternator output - Load detection on both batteries - LED output remotely indicates when to combine, isolate, voltage lock status or start or i stateengine sole. Tin-plated copper studs provide maximum conductivity and corrosion resistance. Stud length of 7/8 (22mm) accommodates multiple cables. Terminals - Silver alloy contacts provide high reliability for switching live loads - Marking notches are used for circuit identification - Specifications - Control circuit connection - Voltage rating Deutsch DTM - Manual override 24 V DC - No motor insulation - Yes - Installation. #10 starting aid yes - starting isolation yes - Average operating current terminal torque when changing state is 140 inch-pounds (15.82 Nm) rated continuous 500A intermittent rated 700A (5 minutes) starting nominal 30 seconds 1450A to meet nominal DC cable size 2x (4/0) live ccurrent switch 300A 12VDC main control switch function Non-switching cycle 100,000 diameterterminal ring gap 1.18 (29.97 mm) terminal length 1.50 (38.1 mm) terminal size 3/8-16 (M10) Blue Sea 7621100 ML ACR 24 Load Relay V 500 A with Deutsch Connector

Frequently asked questions (FAQ) about the Blue Sea 7621100 ML ACR 24 V 500 A load relay with Deutsch connector Who is Blue Sea Systems?
How to describe the Blue Sea 7621100 ML ACR 24 V 500 A load relay with Deutsch connector?
Who is Blue Sea Systems? Blue Sea Systems is committed to improving marine electrical products and systems, such as panel systems, circuit breakers, connectors and insulators. Blue Sea wants to satisfy its distributors, resellers and ultimately its retail customers by designing and manufacturing electrical products designed to withstand the rigors of the marine environment. How to describe the Blue Sea 7621100 ML ACR 24 V 500 A load relay with Deutsch connector? Blue Oceann System 81417 Blue Ocean System 7621100 7621100 ML 24V 500A ACR Charging Relay with Deutsch Connector The 500A magnetic latching (bistable) relay automatically assembles the battery during charging and isolates the battery when discharging and starting the engine. --Magnetic Latch (ML) &mdash-ACR draw very low current (both batteries have dual induction charging -mdashsense) - Startup Isolation (SI) can be configured &mdash to temporarily isolate the load from the engine circuit home while starting the engine. , To protect sensitive electronic equipment - Motor Isolation (EI) can be configured to isolate both motors when both motors are running to protect motor electronics and maximize alternator output - Load sensing on both batteries - LED Output remotely indicates when To combine, isolate, voltage lock state or start staterrage or insulation of the motor. Tin-plated copper studs provide maximum conductivity and corrosion resistance. A 7/8 (22mm) stud length accommodates multiple cables - Silver alloy contacts provide high reliability for switching live loads - Marking notches are used for identification of the circuit Control circuit connection specification Deutsch DTM Rated voltage 24V DC Manual override No motor isolation yes - Installation #10 Starting aid yes - Starting isolation yes -The average torque of the operating current terminals when changing of state is 140 inch-pounds (15.82 Nm) rated continuous 500A intermittent rated 700A (5 minutes) rated start 30 seconds 1450A to meet rated DC cable size 2x (4/0) current switch on 300A Main control switch function 12V DC Non-switching cycle 100,000Terminal Ring Diameter Spacing 1.18 (29.97 mm) Terminal Length 1.50 (38.1 mm) Terminal Size 3/8-16 (M10) Blue Sea 7621100 ML Load Relay ACR 24V 500A with Deutsch Connector

Save $93 when you purchase the Blue Sea 7621100 ML ACR 24V 500A Load Relay with Deutsch Connector b> for only $199 from NVN Marine! Same day dispatch before 3 p.m.Blue Sea 7621100 ML ACR 24 V 500 A charging relay with Deutsch connector Technical specifications

Type:	Electric \| Battery Management
Vendor:	Blue Sea Systems
Weight:	2.1 lbs
Product installation:	Download PDF

Blue Sea 7621100 ML ACR Load Relay 24 V 500 A with Deutsch Connector User ReviewsBlue Sea 7621100 ML ACR Load Relay 24 V 500 A charging with Deut connectorsch Shipping & Returns

Shipping Weight:	2.1 lbs
Box sizes:	3.00 (h) x 7.00 (w) x 11.00 (w)
Cubic feet:	231.0
Returnable:	Yes

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here .