Jabsco Impeller Kit 8 Blades Nitrile 2-9/16" Diameter Ding Drive Marine Plumbing & Ventilation

Impeller Kit - 8 Blades - Nitrile - 2-9/16" Diameter - Ding Drive

Material: Nitrile
Type drive: Ding Drive - Keyway
Number of blades: 8
Dimensions:
Diameter: 2-9 /16"
Shaft Width: 5/8"
Shaft Diameter: 2"
Insert Material:Brass

Jabsco flexible impellers can be installed on most makes and models of engine cooling, bilge, transfer and general purpose impeller pumps flexible bronze.
Jabsco flexible turbines undergo rigorous quality processes to ensure increased reliability, efficiency and longevity. long-lasting performance.

Replace all wheels at least once a year, or sooner, depending on engine function. When installed correctly, a wheel can last several years, but it is always advisable to follow a schedule.e preventative rather than corrective maintenance.

Replacing the wheels is easy. By removing the screws from the end cover, it is possible to remove the impeller using either a Jabsco turbine removal tool, or channel lock pliers, to grip the turbine hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the gasket and end cover, thepump is ready for use.

WARNING: This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings. ca.gov.

Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. Use an acrylic impeller for pumping. bilge water and for...
PRODUCT ID: 50242
SKU: NVN-50242
CSKU: CWR-50242
REWRITE: 61353-jabsco-impeller-kit-8 -blade
MPN: 6056-0003-P
UPC: 671880575263
ASIN: B000O8B5ZC
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU: 6-60560003P
NAME: Jabsco Impeller Kit - 8 Blades - Nitrile - 2-9/16" Diameter- Ding Drive
NAME_EX: JABSCO NITRILE Impeller KIT 8 blades 2 9/16 DIA br> TYPE: Marine Plumbing & Ventilation | Turbines
SELLER: Jabsco
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Apparel
Jabsco 6056-0003-P, Nitrile, Drive Type 6, 8 Blades, 2-9/16 Diameter, 2 Width, 5/8 Shaft, Brass Insert
Jabsco Nitrile 8 Blade Impeller Kit , diameter 2916, Ding drive by Hodges Marine
Clothing
Gtags:

Jabsco

GSpecs:

Jabsco Impeller Kit - 8 Blades - Nitrile - 2-9/16" Diameter - Ding Drive Product Description Turbine Kit - 8 Blades - Nitrile - 2-9/16" Diameter - Ding Drive

Material: Nitrile
Drive Type: Ding Drive - Groove key
Number of blades: 8
Dimensions:
Diameter: 2-9/16"
Shaft Width: 5/8"
Shaft Diameter: 2"
Insert Material: Brass

Flexible turbines Jabsco can be installed on most makes and models of bronze flex impeller for engine cooling, bilge, transfer and general purpose pumps.
Jabsco flex impellers are subject to rigorous quality processes. ensure reliable, efficient and long-lasting performance.

Replace all wheels at least once a year, or sooner, depending on engine operation. When installation is correct.ect, a turbine can last several years, but it is always advisable to follow a preventive rather than corrective maintenance program.

ReplaAdjusting the turbines is easy. By removing the screws From the end cover it is possible to remove the impeller using either a Jabsco impeller removal tool or channel lock pliers to grip the impeller hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to thea wheel during initial priming. After replacing the seal and end cover, the pump is ready for use.

This product can expose you to chemicals, including LEAD, which are recognized by the State of California to cause cancer, birth defects or other reproductive harm. For more information,

Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. Use an acrylic impeller for pumping bilge water and for...

Frequently Asked Questions (FAQ) about Jabsco Impeller Kit - 8 Blades - Nitrile - 2-9/ 16" diameter - Ding Drive Who is the Jabsco?
How to describe the Jabsco turbine kit - 8 blades - Nitrile - 2-9/16" diameter - Ding Drive?
Who is the Jabsco? Jabsco is one of the world's leading manufacturers ofproducts for the recreational marine market, including water systems, engine cooling pumps, searchlights and marine waste systems. Wherever a pump is needed on board a pleasure boat or small work boat, for engine cooling, bilge pumping, fresh or waste water treatment, Jabsco worldwide will provide top quality product. How to Describe Jabsco Impeller Kit - 8 Blades - Nitrile - 2-9/16" Diameter - Ding Drive? Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present . Use an acrylic impeller for pumping bilge water and for...

Save $63 when you purchase the Jabsco Impeller Kit - 8 blades - Nitrile - 2-9/16" diameter - Ding Drivefor only $125 at NVN Marine! Same day dispatch before 3 p.m. Impeller kitJabsco - 8 blades - Nitrile - 2-9/16" diameter - Ding Drive Videos Jabsco turbine kit - 8 blades - Nitrile - 2-9/16" diameter - Ding Drive technical specifications

Type:	Marine plumbing and ventilation \| Wheels
Supplier:	Jabsco
Weight:	0.6 lbs

Jabsco Impeller Kit - 8 Blades - Nitrile - 2-9/ 16" Diameter - Ding Drive User ReviewsJabsco Impeller Kit- 8 Blades - Nitrile - 2-9/16" Diameter - Ding Drive Shipping & Returns

Shipping Weight :	0.6 lbs
Box sizes:	3.00 (h) x 5.00 (w) x 8.00 (l)
Cubic feet:	120, 0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes

For detailed shipping terms, please see our Shipping Policy and you can find our Return & Refund Policy here.