Lenco 12" x 9" Electropolished Edge Mount Trim Tab Kit Boat Outfitting

Electropolished Edge Mount Trim Tab Kit, 12 Gauge Blades / 12 Volt Actuators Trim tabs make the most important difference in how your boat rides and operates. They are optional on some boats but should be as standard as power trim and tilt. Lenco compensators make your boating smoother, drier, faster and with increased safety, whether on a small skiff or a mega-yacht. Lenco's ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. We also like to be oil-free and environmentally conscious. All the same features of the Edge Mount series with the addition of electro-polished blades. Electro-Polish adds a mirror finish and ultimate corrosion protection. The actuatorfitted on the back edge of these 12" blades, giving them a 3" lower mounting height. Blades are made of laser cut 12 gauge electro-polished 304 stainless steel with 1" raised edges and a 5 degree taper. on both sides to the trailing edge and 1/8" hinge pin diameter. Corrosion-resistant upper and lower mounting brackets with mechanical gasket.

Lenco 15115101 Attributes

Tab Size: 12 in. Length X 9 in. Width
Material: Stainless Steel

Lenco 15115101 Features and Benefits

Fast Response Electric Actuators
Fully Submersible Actuators
li>
Plug and Play Waterproof Connectors
Switch Kit Sold Separately
3 Year Limited Warranty

Lenco 15115101 Installation Instructions

Trim_Tab_Manual_TCHDAT.pdf

Lenco Technical Bulletins 15115101

size_diagram_edge_mount_TCHDAT.pdf
standard_performance_diagram_TCHDAT.pdf

12" 9" x 9" Electro-Polished Edge Mount Decorative Tab Kit
12V

Fast-response electric actuators for precise control Fully submersible All Plug & Play connections Deutsch Electro-polished blades are constructed of 12-gauge 304 stainless steel. ", 85x inner cone and 1/8" diameter stainless steel hinge pin Actuators mount to the trailing edge of the blades, requiring 1/2" less transom height than standard mounting tabs. .

Kits include:

(2) Electro-polished 12 gauge stainless steel blades
(2) 15054-001 Actuator with 6' Wires and Deutsch Connectors
(2) 30133 -103 20' Actuator Extension Wire Harnesses
(2) 15085-001 upper mounting brackets with gasketchéité
(2) 50014-001 Lower Mounting Brackets
br>
Lenco Installation/Owner's Manual
Stainless steel mounting hardware

Specifications:

Length of boat:14' - 18'
L" x W":12" x 9"
Hinge Height:2"
Minimum Transom Height:11"

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is known to the State of California to cause cancer, birth defects or other reproductive problems. For more information,

These qualified Lenco product experts are designed to provide you with the products you will use using long-lasting, efficient resources. term.
PRODUCT ID: 56447
SKU: NVN-56447
CSKU: CWR-56447
REWRITE: 67558-lenco-12-x-9-electro-polished-edge-mount
MPN: 15115-101
br>UPC: 874847006798
ASIN: B00AJVKU1E
WSKU: LEN15115101
SSKU:
KSKU: LEN15115101
GSKU:
MSKU:
LSKU: 622-15115101
NAME: Lenco Electro-Polished Edge Mount Trim Tab Kit 12x 9"
NAME_EX: LENCO 12" x 9" Electro Polished Edge Mount Trim Tab KIT
PTITLE: Lenco 12" x 9" Electro Polished Edge Mount Trim Tab Kit TYPE OF PRODUCT: Boat fittings | Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Lenco 15115-101 Trim Tab Kit 12 "x 9" 12V Edge, Polished
LENCO 12" x9" Electro-Polished Edge Trim Kit

Gtags:

Lenco

GSpecs :

Lenco 12" x 9" Electro Polished Edge Mount Trim Tab Kit Product Description

Electro Polished Edge Mount Trim Tab Kit 12 gauge blades/12 volt actuators Trim tabs make the difference most important in how your boat moves and performs. They are optional on some boats but should be as standard as power trim and tilt. Lenco compensators make your boating smoother, drier, faster and with increased safety, whether on a small skiff or a mega-yacht. Lenco's ball screw design is more reliable, three times more powerful and features instant response, making them very user-friendly compared to conventional hydraulic systems. We also like to be oil-free and environmentally conscious. All the same features of the Edge Mount series with the addition of electro-polished blades. Electro-Polishedsh adds a mirror finish and ultimate corrosion protection. The actuator mounts to the trailing edge of these 12" blades, giving them a 3" lower mounting height. The blades are made of Electro-Polish laser-cut 12 gauge 304 stainless steel with 1" raised edges and a 5 degree taper on both sides to the trailing edge and a 1/8" diameter hinge pin. Corrosion-resistant upper and lower mounting brackets with mechanical gland seal.

Attributes Lenco 15115101

Tab Size: 12 inches Length X 9 inches Width
Material: Stainless Steel

Lenco 15115101 Features and Benefits

Fast Response Electric Actuators
Fully Submersible Actuators
Plug and Play Waterproof Connectors
Switch Kit sold separately
Limited to 3 yearsns warranty

Lenco 15115101 Installation Instructions

Trim_Tab_Manual_TCHDAT.pdf

Lenco 15115101 Technical Bulletins

size_diagram_edge_mount_TCHDAT.pdf
standard_performance_diagram_TCHDAT.pdf

12" x 9" Electropolished Edge Mount Trim Tab Kit
12V

Fast-response electric actuators for precise control. Fully submersible. All connections Plug & Play Deutsch. Electropolished blades are made from 12 gauge 304 stainless steel with 1" raised edges, 85x interior taper and 1/8" diameter stainless steel hinge pin. Actuators mount to the trailing edge of the blades, requiring 1/2" less transom height than standard mounting tabs.

Kits include:

(2) Electro-polished 12 gauge stainless steel blades
(2) Actuator 15054-001 with 6' wires andDeutsch connectors
(2) 30133 -103 20' actuator extension wire harnesses
(2) 15085-001 top mounting brackets with gasket
(2) 50014-001 lower mounting brackets
br>
Installation/Manual owner Lenco
Stainless steel mounting hardware

Specifications:

Boat length:14' - 18'
L" x W":12" x 9"
Hinge Height:2"
Minimum Transom Height:11"

These qualified Lenco product experts are. designedto provide you with the products you will use using efficient, long-term resources.

Lenco 12" x 9" Electro-Polished Edge Mount Decorative Tab Kit Related ProductsLenco Top Mount Bracket with Gland Gasket (2008-Present)
Mounting Bracket Lenco compact upper - 2 screws 1 thread
Lenco standard upper mounting bracket - 3 screws 1 thread
Lenco standard lower mounting bracket - 3 bolts
Tecnoseal R1 Rudder anode - Zinc - 1- 7/8" diameter
Tecnoseal R2 rudder anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
Tecnoseal R1AL rudder anode - Aluminum - 1-7/8" diameter
Tecnoseal R2AL rudder anode - Aluminum - 2-13/16" diameter
Tecnoseal R3AL rudder anode - Aluminum - 3- 3/4" Diameter Frequently Asked Questions (FAQ) About Electric Edge Trim Tab Kittro-polished Lenco 12" x 9" Who is the Lenco Marine? How to describe the Lenco 12" x 9" electro-polished Edge Mount Trim Tab Kit? operation of the product?
What is the material of the Lenco 12" x 9" Electro Polished Edge Mount Trim Tab Kit?
What is the weight of the product?
What is the size?
What is the construction of the product?
What is the finish of the product?
Which is manufactured by Lenco Marine compensators? the most important difference in how your boat will sail and operate. Lenco trim tabs will make your boat smoother, drier, faster and with increased safety, whether on a high performance family cruiser or a small skiff. reliable, twice as powerful and offer instant response that makes them very user-friendly. How to Describe Lenco 12" x 9" Electro Polished Edge Trim Tab Kit ? These qualified Lenco product experts are designed to provide you with the products you will use using efficient, long-term resources.

12" x 9" 12V Electropolished Edge Mount Decorative Tab Kit
Fast-response electric actuators for precise control. Fully submersible. All connections Plug & Play Deutsch.
Electropolished blades are made from 12 gauge 304 stainless steel

Precision and responsiveness for a smooth cutting experience and homogeneous. .
Fully waterproof and submersible, so you can mow your lawn in all conditions.
The connections are plug-and-play, so you don't have to worry about the wiring.

Inboard mount trim kits are the perfect choice for those looking to add inboard support to their boat. This kit includes everything you will need to install a triSystem m tabon your boat, including trim tab, mounting hardware and installation guide.

What is the operating voltage of the product? 12

12" x 9" Electropolished Edge Mount Decorative Tab Kit, 12 Volt
Quick response electric actuators for precise control. Fully submersible. All connections Plug & Play Deutsch.
Electro-polished blades are made from 12-gauge 304 stainless steel
Precision and responsiveness for a smooth, consistent cutting experience.
Fully waterproof and submersible, so you can mow your lawn in all conditions.
Connections are plug-and-play, so you don't have to worry about wiring.
All the same features of the Edge Mount series with the addition of electro-polished blades.
Electro-polishing adds a mirror finish and ultimate corrosion protection
Edge Mount Serieswith the addition of electro-polished blades.
Electro-polishing adds a robust finish and ultimate corrosion protection.
Ideal for boats that remain in the water for long periods of time or boats heavily exposed to salt water.

What is the material of Lenco 12" x 9" Electropolished Edge Mount Trim Tab Kit? Stainless steelWhat is the weight of the product? 19What is the size? 12"L x 9"WWhat is the construction of the product? Stainless steelWhat is the finish of the product? Electro Polished

Save $418 when you purchase the Lenco 12" x 9" Electro Polished Edge Trim Tab Kit for only $555 from NVN Marine! Same day dispatch before 3 p.m. Lenco 12" x 9" Electro-Polished Edge Mount Trim Tab Kit Technical Specifications

Type:	Boat Equipment \| Compensating tabs
Seller:	Lenco Marine
Weight:	17 .0 lb
Construction:	Stainless steel

Lenco 12" x 9" Electro-Polished Edge Mount Trim Tab Kit User ReviewsLenco 12" x 9" Electro-Polished Edge Mount Trim Tab Kit Shipping & Returns

Shipping Weight:	17.0 lbs
Box Sizes:	5.00 (h) x 13.00 (w) x 14.00 (w)
Cubic feet:	910.0
Recordable:	Yes
P65:	Yes

To know the detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.