Lenco 9" x 12" Standard Performance Trim Tab Kit with 12V Standard Tactile Switch Kit Boat Outfitting

Standard Performance Series Tabs

Standard actuator with 5/16" stainless steel through-bolts. 1" raised edges with 2" inside taper All 304 12 gauge stainless steel construction with electro-polished blades

We make the best boats better!

Running wide open in rough seas doesn't matter. is not for the faint of heart Aggressive boating requires durable boat accessories. Lenco's Standard Performance trim tab series is designed to handle anything you or Mother Nature could throw at them. go hard and fast. Why should your trim tab system be any different

All stainless steel construction (no dissimilar metals), electro-polished blades for long-lasting good looks?
The speed of the actuator is precise and controllable, so there are no surprisess at maximum speeds

Actuators

Instant response
Fully submersible, maintenance free and sealed for life
High-impact nylon housing, 50% fiberglass filled and ultraviolet resistant

Kits of standard solid state tactile switches with gap function
#15069-001 (124SSR)
For 12 volt single actuator systems. The control box is waterproof, self-contained, sealed, solid state, connected to Deutsch for easy Plug & Play installation and has a built-in winder. Kit includes 36" power pigtail and nylon nuts for mounting keyboard. Colorful display box.

Features

Integrated winding function
Solid state electronics
Plug & Play
Low profile design
Sealed, self-contained keyboard and co-enclosuresolid state driver with waterproof connectors
Quick and simple installation
Includes 36 inch power pigtail for driver box
Hole cutout size 2", total size 2.75" x 2.75'

Each kit contains:

Standard touch switch kit
- 2 gauge 12Electro polished SS trim tab plans
- 2 x 20' actuator extension wire harnesses
- 2 top mounting brackets with gland seal
- 2 bottom mounting brackets
- All necessary stainless steel mounting hardware
This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), recognized by the state of Californiaie as causing cancer, birth defects or other reproductive harm. For more information, go to P65Warnings.ca.gov.

LENCO 9-inch tabs with 5/16 inch stainless steel through bolts. 1 inch inside out, 2 inch cone inside. All 12 gauge 304 stainless steel structures with electropolished blades can be opened in rough seas, not for the faint of heart. Aggressive boating requires durable boating accessories. Lenco's Standard Performance decorative strip series is designed to handle whatever you or nature could throw at them. All objects on your ship are carefully designed to move quickly. Why should the decorative label system be any different? Structure entirelymade of stainless steel (no different metals), electro-polished blades, durable and beautiful. The speed of the actuator is precise and controllable, so you won't be surprised at the highest speed. The actuator responds immediately: fully submerged in water, maintenance-free and sealed for life. Standard solid state, impact resistant, 50% fiberglass filled and UV resistant tactile switch kit, with nylon shell, with roll-up function. Feature #15069-001 (124SSR) for 12 Volt single actuator system. The control box is waterproof, independent, sealed, solid, connected to Deutsch, easy to install plug and play and has a built-in winder. The kit includes a 36-inch power pigtail and nylon nuts for mounting the keyboard. Ox-colored screen. Function Built-in winding function - solid electronic components - plug and play - low profile design - independent sealed keyboard and boxSolid control tier with waterproof connector - Quick and easy installation - Including 36 inch power tail for control box Fiber hole cutting size in inches, overall size 2.75 inch x 2.75', Each kit includes: Standard touch switch kit 2 actuators with 6' wire and Deutsch plug 2 12 gauge stainless steel electropolished decorative sheet, flat surface 2 20' actuator extension wire harness 2 top mounting bracket with gasket 2 Bottom mounting bracket - all necessary mounting hardware made of stainless steel
PRODUCT ID: 29239
SKU: NVN-29239
CSKU: CWR-29239
REWRITE: 40350-lenco-9- x-12-standard- performance version
MPN: RT9X12
UPC: 005828976629
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Lenco 9" x 12" Standard Performance TriTab Kit m with Standard 12V Tactile Switch Kit
NAME_EX: TAB KITLENCO 9"X12" PERFORMANCE WITH TOUCH SWITCH
PTITLE: Lenco 9" Trim Tabs
SELLER: Lenco Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES Lenco 9 " x 12" Standard Performance Trim Tab Kit with 12V Standard Touch Switch Kit - RT9X12

Gtags:

Lenco

GSpecs:

Lenco 9" x 12" Standard Performance Trim Tab Kit with 12V Standard Tactile Switch Kit Product Description Standard Performance Series Tabs

Standard Actuator with 5/16" stainless steel passage bolts. 1" raised edges with 2" cone inside. All 12 gauge 304 stainless steel construction with electro-polished blades

We let's make the best boats better!

Racing the open ocean in rough seas is not for the faint of heart Aggressive boating requires durable boat accessories The Standard Performance trim tab series. Lenco is built to handle anything you or Mother Nature could throw at them your boat is built to go fast and hard Why should your trim tab system be any different?

. All stainless steel construction (no dissimilar metals), electro-polished blades for beautifuldurable appearance.
Actuator speed is precise and controllable, so there are no surprises at maximum speeds

Actuators

Instant response
Fully submersible, maintenance free and sealed for life
Shock resistant, 50% filled Fiberglass, Ultraviolet Resistant Nylon Housing

Standard Solid State Tactile Switch Kits with Gap Feature
#15069-001 (124SSR)
For 12 volt single actuator systems. The control box is waterproof, self-contained, sealed, solid state, connected to Deutsch for easy Plug & Play installation and has a built-in winder. Kit includes 36" power pigtail and nylon nuts for mounting keyboard. Colorful display box.

Features

Integrated winding function
Solid state electronics
Plug& Play
Low-profile design
Sealed, self-contained keyboard and solid-state control box with waterproof connectors
Quick and easy installation
Includes 36" power pigtail for control box
2" hole cutout size, overall size 2.75" x 2.75'

EacH kit contains:

Standard Tactile Switch Kit
- 2 12 gauge electropolished stainless steel decorative tabs
- 2 extension wire harnesses 20' Actuator Bracket
- 2 Upper Mounting Brackets with Gasket
- 2 Lower Mounting Brackets
- br>
- All necessary mounting hardware made of stainless steel
This product can expose you to chemicals, including di(2-é) phthalatethylhexyl). (dehp) which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.

LENCO 9-inch tabs with 5/16 inch stainless steel through bolts. 1 inch inside out, 2 inch cone inside. All 12 gauge 304 stainless steel structures with electropolished blades can be opened in rough seas, which is not suitable for low temperatures. Aggressive boating requires durable boating accessories. Lenco's Standard Performance decorative strip series is designed to handle whatever you or nature could throw at them. All objects on your ship are carefully designed to move quickly. WhyWhere should the decorative label system be different? Full stainless steel structure (no different metals), electro-polished blades, durable and beautiful. The speed of the actuator is precise and controllable, so you won't be surprised at the highest speed. The actuator responds immediately: fully submerged in water, maintenance-free and sealed for life. Standard solid state, impact resistant, 50% fiberglass filled and UV resistant tactile switch kit, with nylon shell, with roll-up function. Feature #15069-001 (124SSR) for 12 Volt single actuator system. The control box is waterproof, independent, sealed, solid, connected to Deutsch, easy to install plug and play and has a built-in winder. The kit includes a 36-inch electric pigtail and nylon nuts for mounting the keyboard. Color display box. Function Built-in winding function-componentssolid electronics - plug and play - low profile design - independent sealed keypad and solid control box with waterproof connector - simple and quick installation - including a 36 inch power tail for the control box Hole cut size fiber in inches , overall size 2.75 in. 20' actuator extension wire harness 2 upper mounting bracket with gasket 2 lower mounting bracket - all necessary mounting hardware stainless steel

Lenco 9 Standard Performance Trim Tab Kit " x 12" with 12V Standard Touch Switch Kit Related ProductsLenco Top Mount Bracket with Gland Gasket (2008-Present)
Lenco Compact Top Mount Bracket - 2 Screws 1 Wire
Bracket of mLenco Standard Top Mount - 3 Screws 1 Wire
LencoSupport Standard Bottom Mount - 3 Bolts
Tecnoseal R1 Rudder Anode - Zinc - 1-7/8" Diameter
Tecnoseal R2 Rudder Anode - Zinc - 2-13/16" diameter
Tecnoseal R3 rudder anode - Zinc - 3-3/4" diameter
Tecnoseal R1AL rudder anode - Aluminum - 1-7/8" diameter
Tecnoseal R2AL Rudder Anode - Aluminum - 2-13/16" Diameter
Tecnoseal R3AL Rudder Anode - Aluminum - 3-3/4" Diameter

Frequently Asked Questions (FAQ) About Lenco 9" x 12" Standard Performance Trim Tab Kit with 12V Standard Tactile Switch Kit Is Lenco Marine? How to Describe the Kit Lenco 9" x 12" Standard Performance Trim Tabs with 12V Standard Tactile Switch Kit?
Who is the Lenco Marine? Trim tabs make the most important difference in how your boat sailswill work. Lenco compensators will make your boating experience smoother, drier, faster and with increased safety, whether on a high-performance family cruiser or a small skiff. Lenco's balls rew design is more reliable, twice as powerful and offers instant response which makes them very user friendly. How to describe the Lenco 9" x 12" Standard Performance Trim Tab Kit with 12V Standard Tactile Switch Kit? LENCO 9 in. 1 inch inside out, 2 inch cone inside. All 12 gauge 304 stainless steel structures with electropolished blades can be opened in rough seas, not for the faint of heart. Aggressive boating requires durable boating accessorieses. Lenco's Standard Performance decorative strip series is designed to handle whatever you or nature could throw at them. All objects on your ship are carefully designed to move quickly. Why should the decorative label system be any different? Full stainless steel structure (no different metals), electropolished blades, durable and beautiful. The speed of the actuator is precise and controllable, so you will not be surprised by the highest speed. The actuator responds immediately: fully submerged in water, maintenance-free and sealed for life. Standard solid state, impact resistant, 50% fiberglass filled and UV resistant tactile switch kit, with nylon shell, with roll-up function. Feature #15069-001 (124SSR) for 12 Volt single actuator system. The control box is waterproof, independent, sealed, solid, connected to Deutsch, easy to install moreg and play and has a built-in winder. The kit includes a 36-inch power pigtail and nylon nuts for mounting the keyboard. Color display box. Function Built-in winding function - solid electronic components - plug and play - low profile design - independent sealed keypad and solid control box with waterproof connector - simple and quick installation - including a 36 inch power tail for the case Order Size Fiber Hole Cutting Size in Inches, Overall Size 2.75" x 2.75', Each Kit Includes: Standard Tactile Switch Kit 2 Actuators or with 6' Wire and Deutsch Plug 2 Decorative Sheet electropolished 12 gauge stainless steel, flat surface 2 20' actuator extension Wiring harness 2 Top mounting bracket with gasket 2 Bottom mounting bracket - all stainless steel mounting hardware needed

Save $529 when youBuy the Lenco 9" x 12" Standard Performance Trim Tab Kit with 12V Standard Tactile Switch Kit for only $793 at NVN Marin! Same day dispatch before 3 p.m. Lenco 9" x 12" Standard Performance Trim Tab Kit with 12V Standard Tactile Switch Kit Technical Specifications

Type:
Equipment of boat | Compensating Tabs

Seller:
Lenco Marine

Weight:
20.58 lbs

Product Brochure:
Download PDF

Lenco 9" x 12" Standard Performance Trim Tab Kit with 12V Standard Tactile Switch Kit>

Weight shipping:
20.58 lbs

Box sizes:
3, 00 (h) x 5.00 (w) x 9.00 (l)

Cubic feet:
135 ,0

Recordable:
Yes

P65:
Yes

For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here .

Type:	Equipment of boat \| Compensating Tabs
Seller:	Lenco Marine
Weight:	20.58 lbs
Product Brochure:	Download PDF

Weight shipping:	20.58 lbs
Box sizes:	3, 00 (h) x 5.00 (w) x 9.00 (l)
Cubic feet:	135 ,0
Recordable:	Yes
P65:	Yes