NavPod GP1900-13 Pre-Cut SailPod for Simrad NSS9 evo2/B&G Zeus9 f/9.5" Wide Guard Boat Outfitting

GP1900-13 Pre-cut SailPod for Simrad NSS9 evo2/B&G Zeus9 for 9.5" wide protection

SailPods are intended for mounting a single radar or chartplotter to the helm Navigation at your fingertips "Where you need it...when you need it." Sail Pods are the smart solution for mounting your radar or chart plotter at the helm, where you can easily place it. 'use and clearly see every detail of the display, giving you a clean mounting solution while hiding unsightly wires. The tamper-proof nickel-plated screws provide a little bling and a lot of security. Double-jointed, NavPods protect your electronics from the harshest offshore sailing conditions. It is best to mount the SailPod on a single-curvature AngleGuard or use a double-curvature AngleGuard to install an InstrumentPod on the upper vertical section.re and a SailPod underneath on the angled section.

Structural Rigidity
Gen3 improvements now include a thicker gauge acrylic cap.ABS material that improves strength and offers better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal
All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This seal offers the best protection for your marine electronics. NavPods are designed to withstand the harshest offshore sailing conditionsdifficult and wet. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the NavPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel
We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For the NavPod Gen3, we provide tamper-resistant, nickel-plated, chrome-plated stainless steel screws for added security combined with a little bling!

Commitment to quality
Weare committed to producing high quality waterproof enclosures for marine electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty.

SailPod for Power is intended for mounting on a Stachion SK135 kit and can be used to mount a SailPod to a surface flat, such as the flybridge. Stachion kits can also be used with a SailPod for high mount applications.

Navigation at your fingertips. Where it's needed...when it's needed. Sail Pods is a smart solution to install a radar or chartplotter on the helm, you can easily install it on the aircraft.
PRODUCT ID: 63801
SKU: NVN-63801
CSKU: CWR-63801
REWRITE: 74912-navpod-gp1900-13-sailpod-pre-cut-f-simrad-nss9-evo2- b-g
MPN: GP1900-13
UPC: 659988110982
ASIN: B07XVBDVXL
WSKU: NAVGP190013
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod GP1900-13 SailPod pre-cut for Simrad NSS9 evo2/B&G Zeus9 f/9.5" Wide Guard
NAME_EX: NAVPOD SAILPOD PRE-cut for SIMRAD NSS9 EVO2/B&G ZEUS2 FOR
PTITRE: NavPod GP1900-13 SailPod pre-cut f/Simrad NSS9 evo2/B&G Zeus9 f/9.5" Wide Guard
TYPE: Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod GP1900-13 SailPod Pre-Cut f/Simrad NSS9 evo2/B&G Zeus9 f/9.5" Wide Guard

Gtags:

Boat

GSpecs:

NavPod GP1900-13 Pre-Cut SailPod for Simrad NSS9 evo2/B&G Zeus9 f/9.5" Wide Guard Product Description GP1900-13 Pre-Cut SailPod for Simrad NSS9 evo2/B&G Zeus9 for 9.5" Wide Guard

SailPods allow you to mount a single radar or chart plotter at the helm. Navigation at your fingertips. "Where you need it…when you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see small details on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to ride a SailPod on a single curvature AngleGuard or use a double curvature AngleGuard to install an InstrumentPod on the top vertical section and a SailPod below on the corners.

Structural rigidity
Gen3 improvements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially harmful effects on plastic. These NavPods are really strong!

Waterproof seal
All NavPods are made with a double seal system providing an excellent seal between the front and back of the NavPod. This sealoffers the best protection for your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyura internal thane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the future to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel
We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPod Gen3, we provide vis tamper-resistant nickel-plated chrome-plated stainless steel for added security combined with a little bling!

Commitment to quality
We are committed to producing high quality waterproof cases for Marine electronics. We stand behind our commitment by offering a 10-year warranty on all new NavPod Gen3s. We want you to be a NavPod customer for life and are ready to earn your trust and loyalty.

SailPod for PowThe kits are intended for mounting on a Stachion SK135 kit and can be used to mount a SailPod on a flat surface, such as the flybridge. Stachion kits can also be used with a SailPod for high mount applications.

Navigation at your fingertips. Where it's needed...when it's needed. Sail Pods is a smart solution to install a radar or chartplotter on the helm, you can easily install it on the aircraft.

Frequently Asked Questions (FAQ) About the NavPod GP1900-13 SailPod Pre-Cut f/Simrad NSS9 evo2/B&G Zeus9 f/9.5" Wide Guard Who is the NavPod ?
How to describe the NavPod GP1900-13 SailPod Pre-Cut f/Simrad NSS9 evo2/B&G Zeus9 f/9.5" Wide Guard?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod GP1900-13 SailPod Pre-Cut f/Simrad NSS9 evo2/B&G Zeus9 f/9.5" Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique weather seal, quality construction and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-evident fasteners. added safety and convenience, concealed wiring and clean installation for easy access How to describe the NavPod GP1900-13 SailPod Pre-Cut f/Simrad NSS9 evo2/B&G.Zeus9 f/9.5" Wide Guard? Navigation at your fingertips. Where it's needed...when it's needed, Sail Pods are a smart solution for mounting a radar or chart plotter on the helm, you can easily install it on the aircraft. Is it cut or not cutHow to mount or what is the mounting style of NavPod GP1900-13 SailPod Pre-Cut f/Simrad NSS9 evo2/B&G? Zeus9 f/9.5" Wide Guard? Pedestal

Save $103 when you purchase the NavPod GP1900-13 Pre-Cut SailPod for Simrad NSS9 evo2/B&G Zeus9 f/9.5" Wide Guard b> for only $336 at NVN Marine! Same day shipping before 3:00 p.m. NavPod GP1900-13 SailPod Pre-Cut.f/Simrad NSS9 evo2/B&G Zeus9 f/9.5" Wide Guard Technical Specifications

Type:	Boat equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cut
Mounting Style:	Stand

NavPod GP1900-13 Pre-Cut SailPod for Simrad NSS9 evo2/B&G Zeus9 f/9.5" Wide Guard User ReviewsNavPod GP1900-13 SailPod Pre-Cut for Simrad NSS9 evo2/B&G Zeus9 f/9.5" Wide Guard Shipping & Return

For detailed shipping policy, please see our policy shipping and you can find our return and refund policy here.