Navpod GP2050-31 SailPod for Furnuno GP1971F 9GPS Marine Navigation & Instruments
NAVGP205031 SailPod
Model: GP2050-31- Pre-cut SailPod for Furuno GP1971F 9? GPS / chart plotter / multi-touch fish finder, for 12? wide protection
SailPods are intended for mounting a single radar or chartplotter at the helm. Navigation at your fingertips. "Where do you need it? When you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see small details on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPodon a single-bend AngleGuard or use a double-bend AngleGuard to install an InstrumentPod on the top vertical section and a SailPod below on the angled section.
StructuActual Rigidity — Gen3 improvements now include a Thicker gauge acrylic coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof seal — All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods are designedus to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is useless when you need to open the SailPod in the future to repair your electronic devices. The gasket will continue to do its job.
Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security and a bit of style!
Engagement to quality We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.
SpecificationsOverall | |
Height | 11 |
Width | 15.125 |
Depth | 6.375 |
Usable face | |
Height | 8.75 |
Width | 12 .75 |
Depth | 5 |
Maximum cutout | |
Height | 9 |
Width | 13 |
NAVGP205031 SailPod
Model: GP2050-31- Pre-cut SailPod for Furuno GP1971F 9 ? GPS / chart plotter / multi-touch fish finder, for 12? wide protection
SailPods are intended for mounting a single radar or chartplotter at the helm. Navigation at your fingertips. "Where do you need it? When you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see small details on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-sealed waterproof seal, NavPods protect your electronics from offsho boating conditionsre the most difficult and wet. It is best to mount a SailPod on a single curvature AngleGuard or use a double curvature AngleGuard to mount an InstrumentPod on the top vertical section and SailPod below on the inclined section.
Structural rigidity — Gen3 improvements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof seal — All SailPods are manufactured with a double seal system providing an excellent seal. This joint offers the bestre protection of your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poran Microcell polyurethane seal is now 50% thicker and is not subject to "retentive compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The gasket will continue to do its job.
Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide stainless steel tamper-proof screwsoxidizable nickel-chrome plated for added safety and a bit of style!
Commitment to quality We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.
SpecificationsOverall | |
Height | 11 |
Width | 15,125 |
Departmenth | 6,375 |
Usable Face | |
Height | 8.75 |
Width | 12.75 |
Depth | 5 |
Maximum cutout | |
Height | 9 |
Width | 13 |
Save $280 when you purchase the Navpod GP2050-31 SailPod for Furnuno GP1971F 9GPS for onlyment $169 from NVN Marine! Same day dispatch before 3 p.m. Navpod GP2050-31 SailPod for Furnuno GP1971F 9GPS Technical Specifications
Type: | Marine Navigation & Instruments | Instruments |
---|---|
Supplier: | NavPod |
For detailed shipping terms, please see our shipping policy and you can find our policy returns and refunds here.
- Navpod GP2050-29 SailPod for Humminbird SOLIX 10
- NavPod GP2050-21 Pre-Cut SailPod for Garmin GPSMAP 820/820xs and 840/840xs f/12" Wide Guard
- NavPod GP2050-20 Pre-Cut SailPod for Garmin GPSMAP 7408 / 7408xsv / 7608 / 7608xsv
- NavPod GP2050-19 Pre-Cut SailPod for Garmin GPSMAP 7410 / 7410xsv / 7610 / 7610xsv f/12" Wide Guard
- NavPod GP2050-18 Pre-Cut SailPod for Furuno GP1870/GP1870F f/12" Wide Guard
- NavPod GP2050-14 Pre-Cut SailPod for Raymarine a95/a97/a98 f/12" Wide Guard
- NavPod GP2050-13 Pre-cut SailPod f/Simrad NSS9 evo2 or B&G Zeus² 9 f/12" Wide Guard