NavPod PP4900-02 Pre-Cut PowerPod for Humminbird ONIX Series 8.4" ONIX8ci - Carbon Black Boat Outfitting

PP4900-02 Pre-Cut PowerPod for Humminbird ONIX Series 8.4" ONIX8ci - Carbon Black

PP4900 Series PowerPods are a better option than rack mounting. PowerPods offer a clean surface. Look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronics is not optimal. Most manufacturers do this. .does a great job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to flush mount it. in the console or in a NavPod The PowerPod also protects plastic connectors and wires from deterioration caused by long-term UV exposure.

Sail PowerPods are intended to be mounted on a. flat surface, perhaps under the cubby or at the aft end of the coc tablekpit, especially on twin wheel boats.
High Gloss Material
NavPoles ds are made with custom co-extruded acrylic coated ABS material. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

Waterproof seal
All NavPods are made with a double seal system providing an excellent waterproof seal between the front and back of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal EPDM seal is now 50% thicker and is not subject to"defined compression" like many rubber compounds. This is important when you need to open the NavPod in the future to service your electronic devices.

Nickel-chrome plated screws
We use all stainless steel.material mounting bracket supplied with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process
Heavy gauge thermoforming is considered an art since many processes come into play. It all starts with the design and development of tooling. We are fortunate to have experienced in-house design engineers using CAD programs such as Solidworks, Catiaand AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality
We are committed to produce the best possible waterproof case for the marine world. Electronic. Now, with two decades of experience under our belt, we are confident you will enjoy years of trouble-free service and long life.g
durable high gloss finish. We will honor our commitment by now offering a 10-year warranty on all new NavPod Gen3s.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for a built-in installation.
PRODUCT ID: 63950
SKU: NVN-63950
CSKU: CWR-63950
REWRITE: 75061-navpod-pp4900-02-powerpod-pre-cut-f-humminbird-onix-series
br>MPN: PP4900-02-C
UPC: 659988112498
ASIN: B07XLPBCKN
WSKU: NAVPP490002C
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod PP4900-02 Pre-Cut PowerPod f/Humminbird ONIX Series 8.4" ONIX8ci - Carbon Black
NAME_EX: NAVPOD PRE-CUT POWERPOD FOR HUMMINBIRD ONIX SERIES 8.4"
PTITLE: NavPod PP4900- 02 Pre-Cut PowerPod f/Humminbird ONIX Series 8.4" ONIX8ci - Carbon Black
TYPE: Boà la pourvoirie | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS
Amazon Category :

NavPod PP4900-02 PowerPod Pre-Cut f/Humminbird ONIX Series 8.4 " ONIX8ci - Carbon Black

Gtags:

GSpecs :

NavPod PP4900-02 Pre-Cut PowerPod for Humminbird ONIX Series 8.4" ONIX8ci - Carbon Black Product Description PP4900-02 Pre-Cut PowerPod for Humminbird ONIX Series 8.4" ONIX8ci - Carbon Black

PP4900 series, PowerPods for Power are a better option than stand mounting. PowerPods offer a sleek look for flush mounting with the benefit of a swivel base.

The trunnion mount that comes with most electronic devices is not optimal. PowerPods have the advantage of protecting the back of the electronics from salt water spray. Most manufacturers do an excellent job of protecting the screen face from water intrusion with sealed rubber push buttons. The back is generally not waterproof. They expect you to slot it into the console or a NavPod. The PowerPod also protects plastic connectors and wires from damage caused by exposure.prolonged UV ion.

The PowerPods for Sail are intended to be mounted on a flat surface. Perhaps under the Dodger or aft end of the cockpit table, especially on dual wheel boats.

High gloss material
NavPods are made with a high gloss material Custom co-extruded ABS with acrylic cap. We use the best UV resistant material that provides a high gloss white finish that matches gel coated fiberglass. Gen3 improvements now include thicker material that improves strength and provides better structural rigidity.

Waterproof seal
All NavPods are made with a double seal system providing an excellent waterproof seal between the front and back of the NavPod for protection of your marine electronics. NavPods are designed to withstand the harshest and wettest offshore sailing conditions. ImprovementsGen3 include a thicker silicone outer gasket with an improved flush fit. The internal EPDM gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the NavPod in the p032.01future to service your electronic devices.

Nickel plated chrome screws
We use all stainless steel mounting hardware supplied with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than previous screws. For Gen3 we provide nickel-chrome plated stainless steel tamper proof screws for added security combined with a little bling!

The manufacturing process
Heavy gauge thermoforming is considered an art since many processes come into play. It all starts with design and development.tooling. We are fortunate to have experienced in-house design engineers who use CAD programs such as Solidworks, Catia and AutoCad. Surfcam is used to interface with our CNC machining centers to produce quality tools with precision tolerances.

Our commitment to quality
We are committed to produce the best possible waterproof case for the marine world. Electronic. Now with two decades of experience under our belt, we are confident you will benefit from years of trouble-free service and a long-lasting glossy finish. We will honor our commitment by now offering a 10-year warranty on all new NavPod Gen3s.

Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of having a rotating base, which can provide a sleek appearance for built-in installation.

Frequently Asked Questions (FAQ) about NavPod PP4900-02 Pre-Cut PowerPod for Humminbird ONIX Series 8.4" ONIX8ci - Carbon Black Who is the NavPod?
How to describe NavPod PP4900-02 Pre-Cut PowerPod f/Humminbird ONIX Series 8.4" ONIX8ci - Carbon Black?
Is it cut or uncut?
How to assemble or what is the style NavPod Mounting Kit PP4900-02 Pre-Cut PowerPod f/Humminbird ONIX Series 8.4" ONIX8ci - Carbon Black?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal , build quality and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof fasteners for added security and convenience, Concealed wiring and clean installation for easy access How to describe the Nav.Pod PP4900-02 Pre-Cut PowerPod f/Humminbird ONIX Series 8.4" ONIX8ci - Carbon Black? Compared to rack installation, PowerPods for Power are a better choice. PowerPods have the advantage of a rotating base, which can provide a clean appearance for built-in installation. Is it cut or uncut

$115

NavPod PP4900-02 Pre-Cut PowerPod for Humminbird ONIX Series 8.4" ONIX8ci - Carbon Black

$374

Type:	Boat Equipment \| Display Media
Supplier:	NavPod
Cut/Uncut:	Cut
Edit Style:	Pulled

For detailed shipping policy, please see our shipping policy and you can find our return & refund policy here.