NavPod SystemPod Precut f/Simrad GO7 Boat Outfitting

Pre-cut SystemPod for Simrad GO7 XSE, GO7 .5″ wide

SystemPods allow radar or chart plotter and instruments to be mounted together at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single-curvature AngleGuard.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater ewaterproofness. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair yourelectronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding stability when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security combined with a bit of style!

Commitment to quality - We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

PRODUCT ID: 89824
SKU: NVN-89824
CSKU: CWR-89824
REWRITE: 100935-navpod-systempod-precut-f-simrad- go7-xse-go7
MPN: GP1600-19
UPC:
ASIN:
WSKU: NAVGP160019
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SystemPod Precut f/Simrad GO7 XSE, GO7 SIMRAD GO 7/XSR B&G VULCAN 7R
PTITLE: NavPod SystemPod Precut f/Simrad GO7 XSE, GO7 f/9.5″ Wide Guard
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod GP1600-19 SystemPod for Simrad Go7-xsr

Gtags:

Fish finder

GSpecs:

NavPod SystemPod Precut f/Simrad GO7 XSE, GO7>Pre-cut SystemPod for Simrad GO7 XSE, GO7 5″

It is best to mount a SystemPod on a single-curvature AngleGuard.

Structural Rigidity – ImprovementsGen3 versions now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poron Mi internal polyurethane sealcrocell is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security combined with a bit of style!

Commitment to quality - We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

Frequently asked questions (FAQ) about NavPod SystemPod Precut f/Simrad GO7 XSE, GO7 NavPod SystemPod Precut f/Simrad GO7 XSE, GO7 is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod SystemPod Precut f/Simrad GO7 XSE, GO7 XSR & B&G Vulcan 7R in the center and 2 additional Instruments (Simrad IS42, B&G Triton² and AP44 square holes; one on each side) f/9.5″ Wide Guard? "

NAVGP160019 SystemPod

Model: GP1600-19

Pre-cut SystemPod for Raymarine AXIOM 7 and 2 inst. (3.6 holes?) for 9.5" wide protection (requires Raymarine front mounting kit no. A80498 for AXIOM 7 and straight Aconnected with NMEA 2000 connector (pre-cut for front mounting)

The SystemPods are for mounting a radar or chart plotter and instruments together on the helm. Navigation at your fingertips "Where you need it? When you need it". the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the smallest details of the screen.

This SystemPod for power can be mounted on the dashboard using the SK11 Post Kit, or mounted high using the SK11 Post Kit.u SK125 Post Kit.

Structural Rigidity — Gen3 enhancements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic magic cap protects ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All SystemPods are made with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker external silicone gasket with an adjustmentimproved flush fitting. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than screws used on our traditional NavPod series. For the NavPod Gen3, we provide tamper-resistant, nickel-chrome-plated stainless steel screws for added security combined with a little style!

Commitment to Quality We stand behind our commitment by offering a 10 year warranty. warranty on all new NavPod Gen3.p>Specifications

Overall
Height	7.75
Width	21.5
Depth	4.46
Usable side
Height	6
Width	19.75
Depth	3.5
Maximum cutout
Height	5.45
Width	19.25

"

Save $110 when you purchase theNavPod SystemPod Precut f/Simrad GO7 XSE, GO7 XSR & B&G Vulcan 7R center and 2 additional instruments (Simrad IS42, B&G Triton² & AP44 square holes; one on each side) f/9.5" Wide Guardfor only $359 from NVN Marine! Same day shipping before 3 p.m.h. NavPod SystemPod Precut f/Simrad GO7 Type:

Boat Equipment | Display Media

Supplier:

NavPod

NavPod SystemPod Precut f/Simrad GO7 User ReviewsNavPod SystemPod pre-cut for Simrad GO7 XSE, GO7>For detailed shipping policy, please check our shipping policy and you can find our return and refund policyhere.