Pre-Cut NavPod SystemPod for Raymarine AXIOM 9 and 2 Instrument (3.6" Holes) f/9.5" Wide Protection (Pre-Cut for Surface Mount Using Rear Mounting Brackets) Boat Outfitting

Pre-cut Raymarine AXIOM 9 and 2 Instrument SystemPod (3.6" holes) for 9.5" wide protection (pre-cut for surface mounting using rear mounting brackets) - For motor or sail

SystemPods allow you to mount a radar or chartplotter and instruments together at the helm. Navigation at your fingertips. "Where you need it…when you need it." SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see even the smallest details of the screen.

For sailing:A The SystemPod is best mounted on a single curvature AngleGuard

For power:A SystemPod can be mounted on a dashboard using the SK135 support kit, or mounted high using the SK130 support kit.

Structural rigidityturelle – Gen3 improvements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater waterproofing of the joint. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal sealrne Poran Microcell Polyurathane is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel eel hardware supplied with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security combined with a bit of style!

Commitment to quality - We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

Navpod GP108023 SystemPod model: GP1080-23 SystemPods are used to install radar or chartplotter and instruments on the helmet. Navigation at your fingertips. "Where you need it, when you need it." SystemPods is a smart solution that can mount radar or chart plotter and gauges on the steering gear, allowing you to easily operate and clearly see screen details. You can use the SK135 mounting kit to install the SystemPod for Power in a short time, or you can use the SK130 mounting kit to install the SystemPod on top. Gen3 structural rigidity improvements now include thicker acrylic-coated ABS material, which can increase strength and provide better structural rigidity. This thicker material can achieve a better seal. The higher the structural rigidity, the lower the deformation during tightening and the greater the pressure on the joint.shape. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic protective layer protects the ABS from ultraviolet rays and its potential damage to plastics. Waterproof seal All SystemPods are made with a double seal system, which provides an excellent seal. The seal can provide the best protection for your vessel's electronic equipment. SystemPods can withstand the harshest offshore rowing conditions. Gen3 improvements include thicker exterior silicone gaskets for a better fit. Today, the thickness of the Poran Microcell polyurethane inner seal has increased by 50% and, like many rubber compounds, is no longer affected by "compression clearance". This is important when you need to open SystemPod to repair electronic devices in the future. The seal will continue to work. NavPod keys with large r-head tamper-proof screwswave have deeper sockets. Compared to the screws used on the traditional NavPod series, the clamping force is better when tightening.
PRODUCT ID: 74141
SKU: NVN-74141
CSKU: CWR-74141
REWRITE: 85252 -navpod -systempod-pre-cut-f-raymarine-axiom-9
MPN: GP1080-23
UPC: 659988114492
ASIN: B07R8V4LT7
WSKU: NAVGP108023
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SystemPod Pre-cut f/Raymarine AXIOM 9 & 2 Instrument (3.6″ holes) f/9.5″ Wide Guard (Pre-cut f/ Surface mount using rear mounting brackets)
NAME_EX: NAVPOD SAIL/POWER POD PRECUT FOR RAMARINE AXIOM 9 & 2
PTITLE: NavPod SystemPod Pre-Cut f/Raymarine AXIOM 9 & 2 Instrument (3.6″ holes) f/9.5″ Wide Guard (pre-cut for surface mounting using rear mounting brackets)
TYPE: Boat or Mount | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS
Category Amazon: GPS or navigation system
NavPod GP1080-23 Pre-cut SystemPod for Raymarine Axiom 9 and 2 inst. (3.6" holes) for 9.5" wide guard (Precut is for surface mounting using rear mounting brackets) (Precut for surface mounting using rear mounting brackets rear)
GPS or navigation system
Gtags:

GSpecs:

NavPod SystemPod pre-cut for Raymarine AXIOM 9 and 2 instruments (3.6 inch holes) f/9.5 inch wide protection (pre-cut for surface mounting using rear mounting brackets) Product Description

Pre-cut SystemPod for Raymarine AXIOM 9 & 2 Instrument (3.6″ holes) for 9.5″ wide protection (pre-cut for surface mounting using rear mounting brackets) - For motor or sail

SystemPods are intended for mounting a radar or chartplotter and instruments together at the helm. Navigation at your fingertips. "Where you need it…when you need it." SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see even the smallest details of the screen.

For sailing:A It is best to mount the SystemPod on an AngleGuard with curvatureunique

For power:A SystemPod can be mounted on a dashboard using the SK135 bracket kit, or mounted high up using the kit SK130 support bracket.

Structural Rigidity – The Gen3 Improvements now include thicker acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstandster to the most difficult wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the SystemPod in the future to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security combined with a bit of style!

Commitment to quality - We stand by our commitment by offering a 10-year warranty on all new NavPods Gen3.

Navpod GP108023 SystemPod Model: GP1080-23 SystemPods are used to install radar or chartplotter and instruments on the helmet. Navigation at your fingertips. "Where you need it, when you need it." SystemPods is a smart solution that can mount radar or chartplotter and gauges on the steering gear, allowing you to easily use and erase it. Simply see the details on the screen. You can use the SK135 mounting kit to install the SystemPod for Power in a short time, or you can use the SK130 mounting kit to install the SystemPod on top. Gen3 structural rigidity improvements now include thicker acrylic-coated ABS material, which can increase strength and provide betterre structural rigidity. This thicker material can achieve a better seal. The higher the structural rigidity, the lower the deformation during tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic protective layer protects the ABS from ultraviolet rays and its potential damage to plastics. Waterproof seal All SystemPods are made with a double seal system, which provides an excellent seal. The seal can provide the best protection for your vessel's electronic equipment. SystemPods can withstand the harshest offshore rowing conditions. Gen3 improvements, including thicker silicone outer seals for a better fit. Now the thickness of the Poran Microcell polyurethane inner seal has increased by 50% and, like many rubber compounds, is not affected by "removable warping".anent by compression". This is important when you need to open SystemPod to repair electronic devices in the future. The seal will continue to work. NavPod keys with large round head tamper-proof screws have deeper sockets. Compared to the screws used on the traditional NavPod series, the clamping force is better when tightening.

Frequently Asked Questions (FAQ) about Raymarine AXIOM 9 and 2 Instrument Pre-Cut NavPod SystemPod (3.6" Holes) f/9.5 inches Wide Guard (Pre-cut for surface mounting using rear mounting brackets) Who is the NavPod?
How to Describe the NavPod Pre-Cut SystemPod for Raymarine AXIOM 9 & 2 Instrument (3.6″ Holes) f /9.5″ Wide Guard (pre-cut for surface mounting using the rear mounting brackets)?
Is this cut or uncut?
How to mount or what is the style of assembly of the pre-cut NavPod SystemPod f/Raymarine AXIOM 9 & 2 Instrument (3.6″ holes) f/9.5″ Wide Guard (pre-cut for surface mount) Using rear mounting brackets)?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod SystemPod Pre-Cut f/Raymarine AXIOM 9 & 2 Instrument (3.6″ holes) f/9.5" wide guard (pre-cut for surface mounting using rear mounting brackets)? Navpod GP108023 SystemPod Model: SystemPod GP1080-23 are used to install radar or chartplotter and instruments on the helmet. The navigationat your fingertips. "Where you need it, when you need it." SystemPods is a smart solution that can mount radar or chart plotter and gauges on the steering gear, allowing you to operate it easily and see screen details clearly. You can use the SK135 mounting kit to install the SystemPod to Power in a short time, or you can use the SK130 mounting kit to install the SystemPod on top. Gen3 structural rigidity improvements now include thicker ABS material coated with acrylic, which can increase strength and provide better structural rigidity. greater sealing. The higher the structural rigidity, the lower the deformation during tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. Acrylic protective layer protects ABS from ultravioletlets. rays and its potential damage to plastics. Waterproof Seal All SystemPods are manufactured with a double seal system, which provides excellent sealing. The seal can provide the best protection for your vessel's electronic equipment. SystemPods can withstand the harshest offshore rowing conditions. Gen3 improvements include thicker exterior silicone gaskets for a better fit. Now the thickness of the Poran Microcell polyurethane inner seal has increased by 50% and, like many rubber compounds, is not affected by "compression set". This is important when you need to open SystemPod to repair electronic devices in the future. The seal will continue to work. NavPod wrenches with large round head tamper-proof screws have deeper sockets. Compared to the screws used on the traditional NavPod series, the strength oftightening is better when tightening. Is it cut or not? Cut

$125

NavPod SystemPod pre-cut for Raymarine AXIOM 9 & 2 instrument (3.6″ holes) f/9.5″ wide protection (pre-cut for surface mounting using rear mounting brackets)

$404

Type:	Boat equipment \| Display Media
Supplier:	NavPod
Weight:	6.75 lbs
Mounting Style:	Pedestal
Cut/Uncut:	Cut

Shipping Weight:	6.75 lbs
Box Sizes:	8.00 (h) x 12.00 (w) x 20.00 (l)
Cubic feet:	1920.0
Returnable:	Yes

For detailed shipping terms, please review our shipping policy and you can find our return and refund policy here.