Pre-cut NavPod SystemPod f/Raymarine Axiom 12 & Axiom+ 12 on the right and 2 additional instruments (3.6″ holes) on the left f/9.5″ Wide Guard Boat Outfitting

Pre-cut SystemPod for Raymarine Axiom 12 & Axiom+ 12 on the right and 2 additional instruments (3.6″ holes) on the left for 9.5″ wide protection

GP1080-15 for Sailing: Pre-cut SystemPod for Raymarine Axiom 12 / Axiom+ 12 on the right AND 2 additional instruments (3.6″ holes) on the left for 9.5″ wide protection (pre-cut is for surface mount using the rear mounting brackets)

SystemPods allow a radar or chart plotter and instruments to be mounted together at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chart plotter and instruments together on the helm, where you can easily operate them and clearly see even the smallest details of the screen.

This SystemPod for The power supply can be mounted on the dashboard using the SK135. Buddy Kitaux, or mounted high using the SK130 Post Kit.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better rigidity structural. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include an external B-jointthicker licone with improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant, nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to quality
We stand behind our commitment by offering a 10-year warranty years on all new Gen3s. NavPods.

PRODUCT ID: 92176
SKU: NVN-92176
CSKU: CWR-92176
REWRITE: 103287-navpod-systempod-pre-cut- f-raymarine-axiom -12
MPN: GP1080-15
UPC:
ASIN:
WSKU: NAVGP108015
SSKU:
KSKU:
GSKU:
MSKU:
LSKU :
NAME: NavPod SystemPod pre-cut f/Raymarine Axiom 12 and Axiom+ 12 on the right and 2 additional instruments (3.6″ holes) on the left f/9.5″ Wide Guard
NAME_EX: NAVPOD SAILPOD PRE-CUT FOR RAYMARINE AXIOM 12 AND 2 INST
PTITLE: Pre-cut NavPod SystemPod f/Raymarine Axiom 12 and Axiom+ 12 on the right and 2 additional instruments (3.6″ holes) on the left f/9.5″ Wide Guard
TYPE : Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod GP1080-15 SystemPod for Raymarine Axiom 12

Gtags:

Card plotter

Specifications G:

NavPod Pre-cut SystemPod for Raymarine Axiom 12 and Axiom+ 12 on the right and 2 additional instruments (3.6 inch holes) on the left for 9.5 inch wide protection Product Description

Pre-cut SystemPod for Raymarine Axiom 12 and Axiom+ 12 on the right and 2 additional instruments (3.6″ holes) on the left for 9.5″ wide protection

GP1080-15 for sail: Pre-cut SystemPod for Raymarine Axiom 12 / Axiom+ 12 on the right AND 2 additional instruments (3.6″ holes) on the left for 9.5″ wide protection (precut is for surface mounting using the rear mounting brackets)

SystemPods allow you to mount radar or chartplotter and instruments together at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the baserre, where you can easily use them and clearly see the smallest details of the screen.

This SystemPod for power can be mounted on the dashboard using the SK135. Stanchion kit, or mounted high using the SK130 post kit.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This joint offers the bestre protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane seal is now 50% thicker and is not subject to "retentive compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide steel tamper-proof screwsnickel-chrome plated stainless steel for added safety and a bit of style!

Commitment to quality
We stand behind our commitment by offering a 10-year warranty on all new Gen3s. NavPods.

Frequently Asked Questions (FAQ) about Pre-Cut NavPod SystemPod f/Raymarine Axiom 12 and Axiom+ 12 right and 2 additional instruments (3 holes .6 inches) ) left f/9.5″ Wide Guard Who is the NavPod?
How to proceedwrite NavPod SystemPod Pre-Cut f/Raymarine Axiom 12 & Axiom+ 12 right and 2 additional instruments (3.6″ holes ) left f/9.5″ Wide Guard?
What are the dimensions of the product?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include sil sealwaterproof icon, tamper-resistant fasteners for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod SystemPod Pre-Cut f/Raymarine Axiom 12 & Axiom+ 12 on the right and 2 additional instruments (3.6″ holes) on the left wide guard f/9.5″? "

Navpod GP108015 SystemPod

Model: GP1080-15

Pre-cut SystemPod for Raymarine AXIOM 12 and 2 inst. (3.6 holes? ) for 9.5? wide protection (precut is for surface mounting using rear rack mounts)

SystemPods allow mounting of a radar or chartplotter and instruments together at the helm. Navigation at your fingertips. When you need it." SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and see clearlyment the smallest details of the screen.

This SystemPod for power can be mounted on the dashboard using the SK135. Post Kit, or mounted high using the SK130 Post Kit.

Structural Rigidity — Gen3 enhancements now include thicker gauge acrylic coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its possible harmful effects on the plastic.

Waterproof seal — All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designedto withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional NavPod series. For the NavPod Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security combined with a phad style!

Commitment to quality We stand behind our commitment by offering a 10-year warranty. warranty on all new NavPod Gen3.

Specifications

Top
Height	11,625
Width	19.625
Depth	6,875
Usable face
Height	9.125
Width	17
Depth	5.75
Maximum cutout
Height	9.5
Width	17 .5
Dimensions	19 x 14 x 8 in

"What are the dimensions of the procanal? 19 x 14 x 8 inches

Savesz $125 with purchase of the pre-cut NavPod SystemPod for Raymarine Axiom 12 and Axiom+ 12 on the right and 2 additional instruments (3.6″ holes) on the left f/9.5″ Wide Guardfor only $404 from NVN Marine! Same day dispatch before 3 p.m. Pre-cut NavPod SystemPod f/Raymarine Axiom 12 & Axiom+ 12 on the right and 2 additional instruments (3.6″ holes) on the left f/9.5″ Wide Guard Technical specifications

Type :	Boat outfitter \| Display Media
Supplier:	NavPod

NavPod SystemPod pre-cut for Raymarine Axiom 12 and Axiom+ 12 on the right and 2 additional instruments (3.6 inch holes) on the left for f/9.5 inch Wide Guard User reviewsNavPod SystemPre-cut Pod for Raymarine Axiom 12 and Axiom+ 12 on Right and 2 additional instruments (3.6" holes) on the left f/9.5″ Wide Guard Shipping and Returns

Forknow the detailed shipping policy, please see our shipping policy and you can find our return and refund policy here.