Pre-cut NavPod SystemPod f/Garmin GPSMAP 8410xsv & 8610xsv on the right and 2 additional instruments (3.6″ holes) on the left f/9.5″ Wide Guard Boat Outfitting

Pre-cut SystemPod for Garmin GPSMAP 8410xsv & 8610xsv on the right and 2 additional instruments (3.6″ holes) on the left for 9.5″ wide protection

GP1080-31 for Sailing: Pre-cut SystemPod for Garmin GPSMAP 8410xsv/8610xsv on the right AND 2 additional instruments (3.6″ holes) on the left for 9.5″ wide protection

SystemPods Allows radar or chart plotter and instruments to be mounted together at the helm. Navigation at your fingertips. Where you need it…when you need it. SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single-curvature AngleGuard.

Structural Rigidity – Gen3 enhancements now include higher gauge acrylic coated ABS materials thick which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flexing when tightening and more uniform pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "defined compression" clike many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant, nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to quality
We stand behind our commitment by offering a 10-year warranty years on all new Gen3s. NavPods.

PRODUCT ID: 92177
SKU: NVN-92177
CSKU: CWR-92177
REWRITE: 103288-navpod-systempod-pre-cut- f-garmin-gpsmap-8410xsv
MPN: GP1080-31
UPC:
ASIN:
WSKU: NAVGP108031
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SystemPod pre-cut f/Garmin GPSMAP 8410xsv and 8610xsv to right and 2 additional instruments (3.6″ holes) left f/9.5″ Wide Guard
NAME_EX: PRE-CUT NAVPOD SAILPOD FOR GARMIN GPSMAP 8410/8610XSV
PTITLE: Pre-Cut NavPod SystemPod for Garmin GPSMAP 8410xsv and 8610xsv on the right and 2 additional instruments (3.6″ holes) on the left f/9.5″ Wide Guard
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod GP1080-31 SystemPod for Garmin GPSMAP 8410/8610
br>
Gtags:

Card plotter

GSpecs:

Pre-cut NavPod SystemPod for Garmin GPSMAP 8410xsv and 8610xsv on the right and 2 additional instruments (3.6 inch holes) on the left f/9.5 inch Wide Guard Product Description

Pre-cut SystemPod for Garmin GPSMAP 8410xsv and 8610xsv on the right and 2 additional instruments (3.6″ holes) on the left for 9.5″ wide protection

GP1080-31 for Sail: Pre-cut SystemPod for Garmin GPSMAP 8410xsv /8610xsv on the right AND 2 additional instruments (3.6″ holes) on the left for 9.5″ wide protection

SystemPods allow you to mount a radar or chart plotter and instruments together at the bar. Navigation at your fingertips. Where you need it…when you need it. SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is preferredable to mount a SystemPod on a single-curvature AngleGuard.

Structural Rigidity – Gen3 improvements now include thicker gauge acrylic lic-capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 upgrades include exterior sealThicker silicone cover with improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant, nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to quality
We stand behind our commitment by offering a 10-year warranty years on all newx Gen3. NavPods.

Frequently Asked Questions (FAQ) about Pre-Cut NavPod SystemPod f/Garmin GPSMAP 8410xsv and 8610xsv Right and 2 Additional Instruments (3 Holes) .6 inches) ) left f/9.5″ Wide Guard Who is the NavPod?
How to describe the NavPod SystemPod Pre-Cut f/Garmin GPSMAP 8410xsv & 8610xsv right and 2 additional instruments (3.6" holes) on the left f/9.5″ Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to Describe the Pre-Cut NavPod SystemPod for Garmin GPSMAP 8410xsv and 8610xsv on the right and 2 additional instruments (3.6″ holes) on the left wide guard f/9.5″? "

NAVPOD GP108031 SystemPod

Model: GP1080-31

Pre-cut SystemPod for Garmin GPSMAP 8410xsv/8610xsv and 2 inst. (3.6 ? hole) for 9.5 ? wide protection

SystemPods mount radar or chart plotter and instruments together at your fingertips are the smartSolution for mounting your. radar or chart plotter and your instruments together on the bar where you can easily operate and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single curvature AngleGuard.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing More structural rigidity. est, the less bending there is during tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to compression like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue todo its job.

Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional NavPod series. For the NavPod Gen3, we provide tamper-resistant, nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to quality

Specifications

Global
Height	11.625
Width	19,625
Depth	6,875
Usable face
Height	9.125
Width	17
Depth	5.75
Cutout maximum
Height	9.5
Width	17.5

"

Save $125 when you purchase the Pre-cut NavPod SystemPod f/Garmin GPSMAP 8410xsv and 8610xsv on the right and 2 additional instruments (3.6″ holes) on the left f/9.5″ Wide Guard for only $404 from NVN Marine! Same day shipping before 3 p.m. Pre-cut NavPod SystemPod for Garmin GPSMAP 8410xsv and 8610xsv right and 2 additional instruments (3.6 inch holes) left f/9.5 inch Wide Guard Specifications. techniques

Type:	Boat equipment \| Display stands
Supplier:	NavPod

NavPod SystemPod pre-cut for Garmin GPSMAP 8410xsv and 8610xsv on the right and 2 extra instrumentsAdditional instruments (3.6″ holes) on the left f/9.5″ Wide Guard User reviewsNavPod SystemPre-cut pod for Garmin GPSMAP 8410xsv and 8610xsv on Right and 2 additional instruments (3.6″ holes) on the left f/9 .5″ Wide Guard Shipping & Returns

For detailed shipping policy, please see our Shipping Policy and you can find our Return & Refund Policy here.