Pre-cut NavPod SystemPod for Garmin GPSMAP 723 and 743xsv right and GHC 50 left f/9.5" wide angle protection Boat Outfitting

Pre-cut SystemPod for Garmin GPSMAP 723 and 743xsv on the right and GHC™ 50 on the left for 9.5-inch wide-angle protection

SystemPods are intended for mounting a Radar or chart plotter and instruments combined at the bar. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single-curvature AngleGuard.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The better the structural rigidity, the less deflection. during thetightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. Acrylic cap protects the seal.ABS against UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing excellent sealing. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For Gen3 NavPods, we provide stainless steel tamper-proof screws nickel chrome plated for added safety combined with a bit of style!

Commitment to quality - We stand by our commitment by offering a 10 year warranty on all new NavPods Gen3.

PRODUCT ID: 96908
SKU: NVN-96908
CSKU: CWR-96908
REWRITE: 108019-navpod-systempod-pre-cut-f- garmin-gpsmap-723
MPN: GP1500-51
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Pre-cut NavPod SystemPod for Garmin GPSMAP 723 and 743xsv right and GHC™ 50 left f/9.5" wide angle protection
NAME_EX: NAVPOD SYSTEM POD PRECUT F/ GARMIN 723/ 743XSV RIGHT
PTITLE: Pre-cut NavPod SystemPod for Garmin GPSMAP 723 and 743xsv right and GHC™ 50 left f/9.5" Wide angle guard
br>TYPE: Boat Equipment | Display Mounts
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

Category Amazon:
Gtags:

GSpecs:

Pre-cut NavPod SystemPod for Garmin GPSMAP 723 and 743xsv right and GHC™ 50 left f/9.5" Wide Angle Guard Product Description

Pre-cut SystemPod for Garmin GPSMAP 723 and 743xsv right and GHC™ 50 left for 9.5" wide angle protection

SystemPods are intended for mounting a radar or chart plotter and instruments together on the helm Navigation at your fingertips… "Where you need it, when you need it." SystemPods are the smart solution for mounting your radar or chart plotter and instruments together on the helm, where you can easily. use them and clearly see the fine details of the screen.

A SystemPod is best mounted on a single-curvature AngleGuard

Structural Rigidity – Gen3 improvements now include a. Thicker gauge acrylic coated ABS material that improves strength and provides better structural rigidityturelle. This thicker material allows for greater sealing. The better the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when youwill need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large Round Head The tamper-resistant screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security combined with a bit of style!

Commitment to quality - We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

Frequently Asked Questions (FAQ) about Pre-Cut NavPod SystemPod f/Garmin GPSMAP 723 and 743xsv right and GHC™ 50 left f/9, 5" Wide angle protection Who is the NavPod?
Who is the NavPod? The Navpod is abest way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive design make the best-built instrument case ever available. Features of all Navpods include waterproof silicone seal, tamper-proof clips for security and convenience, concealed wiring and clean installation for easy access.

Save $84 when you purchase the Pre-Cut NavPod SystemPod f/Garmin GPSMAP 723 and 743xsv right and GHC™ 50 left f/9.5 " wide Angle Guard for only $295 at NVN Marine! Same day shipping before 3:00 p.m. Pre-cut NavPod SystemPod for Garmin GPSMAP 723 and 743xsv right and GHC™ 50 left f/ 9.5. "Wide Angle Protection Technical Specifications

Type:	Boat Equipment \| Display Media
Supplier:	NavPod

NavPod SystemPod pre-cut for Garmin GPSMAP 723 and 743xsv on the right and GHC™ 50 on the left f/9.5" Wide Angle Guard User reviewsNavPod SystemPod pre-cut for Garmin GPSMAP 723 and 743xsv on the right and GHC™ 50 on the left f /9.5" Wide Angle Guard Shipping & Return

For detailed shipping please see our shipping policy and you can find our return & refund policy here.