Pre-cut NavPod SystemPod for Garmin GPSMAP 923 923xsv 943 and 943xsv on the right and 1 additional instrument (3.6″ hole) on the left f/9.5″ Wide Guard Boat Outfitting

Pre-cut SystemPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv on the right and 1 additional instrument (3.6 inch hole) on the left for 9.5 inch wide protection

GP1040-52 for Sail: Pre-cut SystemPod for Garmin GPSMAP 923/923xsv/943/943xsv on the right AND 1 additional instrument (3.6″ hole) on the left for 9.5″ wide protection

SystemPods are intended to mount radar or chart plotter and instruments together at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chart plotter and instruments together on the helm, where you can easily operate them and clearly see even the smallest details of the screen.

This SystemPod for The power supply can be mounted on the dashboard using the SK135. Stanchion kit, or mounted high using the SK129 stanchion kit.

RStructural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker mat material allows for a larger waterproof seal. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant, nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to quality
We stand behind our commitment by offering a 10-year warranty years on all new Gen3s. NavPods.

PRODUCT ID: 92175
SKU: NVN-92175
CSKU: CWR-92175
REWRITE: 103286-navpod-systempod-pre-cut-f-garmin-gpsmap-923-923xsv
MPN: GP1040-52
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU: LSKU:
NAME: NavPod SystemPod pre-cut f/Garmin GPSMAP 923, 923xsv, 943 and 943xsv right and 1 extra instrument (3.6″ hole) left f/9.5″ Wide Guard
NAME_EX: NAVPOD SAILPOD PRECUT FOR GARMIN GPSMAP 923/943XSV 1
PTITLE: NavPod SystemPod Pre-Cut f/Garmin GPSMAP 923, 923xsv, 943 and 943xsv on the right and 1 additional instrument (3.6″ hole) on the left f/9.5″ Wide Guard
TYPE: Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

Gtags:
br>
GSpecs:

Pre-cut NavPod SystemPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv on the right and 1 additional instrument (3.6 inch hole) on the left for 9.5 inch wide protection Product Description

Pre-cut SystemPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv on the right and 1 additional instrument (3.6″ hole) on the left for 9.5″ wide protection

GP1040-52 for Sail: Pre-cut SystemPod for Garmin GPSMAP 923/923xsv/943/943xsv on the right AND 1 additional instrument (3.6″ hole) on the left for 9.5″ wide protection

SystemPods allow to mount radar or chart plotter and instruments together at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see even the smallest detailsof the screen.

This SystemPod for power can be mounted on the dashboard using the SK135. Stanchion Kit, or mounted high using the SK129n Stanchion Kit.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstandter the most difficult wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane seal is now 50% thicker and is not subject to "set compression" like many other rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security and a bit of style!

EnCommitment to Quality
We honor our commitment by offering a 10-year warranty on all new Gen3s. NavPods.

Frequently asked questions (FAQ) about the NavPod Pre-cut SystemPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv right and 1 additional instrument ( 3.6″ hole) on the left f/9.5″ Wide Guard Who is the NavPod?
Who is the NavPod? Navpod is a better solution for mounting your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access.

Save $102 when you purchase the Pre-Cut NavPod SystemPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv atright and 1 additional instrument (3.6″ hole) on the left f/9.5″ Wide Guardfor only $357 from NVN Marine! Same day dispatch before 3 p.m. Pre-cut NavPod SystemPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv on the right and 1 additional instrument (3.6″ hole) on the left f/9.5″ Wide Guard Technical specifications

Type:	Boat equipment \| Display Stands
Seller:	NavPod

Pre-cut NavPod SystemPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv on Right and 1 additional instrument (3.6″ hole) on left f/9.5″ Wide Guard /9.5″ Wide Guard Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our return & refund policy here.