Pre-cut NavPod SystemPod f/Garmin GPSMAP 8412xsv & 8612xsv on the right and 2 additional instruments (3.6″ holes) on the left f/9.5″ Wide Guard Boat Outfitting

Pre-cut SystemPod for Garmin GPSMAP 8412xsv and 8612xsv on the right and 2 additional instruments (3.6" holes) on the left for 9.5" wide protection

GP1080-33 for Sailing: Pre-cut SystemPod for Garmin GPSMAP 8412xsv/8612xsv on the right AND 2 additional instruments (3.6″ holes) on the left for 9.5″ wide protection

SystemPods Allows radar or chart plotter and instruments to be mounted together. at the bar. Navigation at your fingertips. Where you need it, when you need it. SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single-curvature AngleGuard.

Structural rigidity – Gen3 improvements now include acrylic-coated ABS materialThicker gauge which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The better the structural rigidity, the less flexing when tightening and more uniform pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane seal is now 50% thicker and is not subject to "compression"."we define" as many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant, nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to quality
We stand behind our commitment by offering a 10-year warranty years on all new Gen3s. NavPods.

PRODUCT ID: 92178
SKU: NVN-92178
CSKU: CWR-92178
REWRITE: 103289-navpod-systempod-pre-cut- f-garmin-gpsmap-8412xsv
MPN: GP1080-33
UPC:
ASIN:
WSKU: NAVGP108033
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SystemPod pre-cut f/Garmin GPSMAP 8412xsv and 8612xsv on the right and 2 additional instruments (3.6″ holes) on the left f/9.5″ Wide Guard
NAME_EX: NAVPOD SAILPOD PRE-CUT FOR GARMIN GPSMAP 8412/8612XSV
PTITLE: Pre-cut NavPod SystemPod for Garmin GPSMAP 8412xsv and 8612xsv on the right and 2 additional instruments (3.6″) on the left f/9.5″ Wide Guard
TYPE: Boat fitting | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod GP1080-33 SystemPod for Garmin GPSMAP 8412/8612
br>
Gtags:

GSpecs:

Pre-cut NavPod SystemPod for Garmin GPSMAP 8412xsv and 8612xsv on the right and 2 additional instruments (3.6 inch holes) on the left f/9.5 inch Wide Guard Product Description

Pre-cut SystemPod for Garmin GPSMAP 8412xsv and 8612xsv on the right and 2 additional instruments (3.6″ holes) on the left for 9.5″ wide protection

GP1080-33 for Sail: Pre-cut SystemPod for Garmin GPSMAP 8412xsv /8612xsv on the right AND 2 additional instruments (3.6″ holes) on the left for 9.5″ wide protection

SystemPods allow mounting of a radar or chart plotter and instruments together on the bar. Navigation at your fingertips. Where you need it, when you need it. SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is pIt's easy to mount a SystemPod on a single-bend AngleGuard.

Structural Rigidity – Gen3 improvements now include thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include an updateThicker silicone outer int with improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "set compression" like many rubber compounds. This is important when you need to open the SystemPod in the future to repair your electronic devices. The seal will continue to do its job.

Commitment to quality
We stand behind our commitment by offering a 10-year warranty years out of every nnew Gen3. NavPods.

Frequently Asked Questions (FAQ) about Pre-Cut NavPod SystemPod f/Garmin GPSMAP 8412xsv and 8612xsv Right and 2 Additional Instruments (3 Holes) .6 inches) ) left f/9.5″ Wide Guard Who is the NavPod?
How to describe the NavPod SystemPod Pre-Cut f/Garmin GPSMAP 8412xsv & 8612xsv right and 2 additional instruments (3.6 holes ″) on the wide left f/9.5″ shield?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to Describe Pre-Cut NavPod SystemPod for Garmin GPSMAP 8412xsv and8612xsv on the right and 2 additional instruments (3.6″ holes) on the left wide guard f/9.5″? "

NAVPOD GP108033 SystemPod

Model: GP1080-33

Pre-cut SystemPod for Garmin GPSMAP 8412xsv/8612xsv and 2 inst. (3.6 ? hole) for 9.5 wide protection?

SystemPods allow you to mount radar or chartplotter and instruments together at your fingertips. mount your radar or chartplotter and instruments together on the bar where you can easily operate and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single-curvature AngleGuard .

Structural Rigidity — Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for more. great tightness. More rigiditystructural is high, the less flexion there is during tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All SystemPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to compression like many rubber compounds. This is important when you need to open the SystemPod in the future to repair your electronic devices.ues. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel — We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional NavPod series. For the NavPod Gen3, we provide tamper-resistant, nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to quality

Specifications

General
Height	11,625
Width	19,625
Depth	6,875
Usable side
Height	9.125
Width	17
Depth	5.75
Maximum cutout
Height	9.5
Width	17.5

"

Save $125 when you purchase the NavPod SystemPod pre-cut f/Garmin GPSMAP 8412xsv and 8612xsv right and 2 additional instruments (3.6″ holes) left f/9.5″ Wide Guard for only $404 from NVN Marine! Same day shipping before 3:00 p.m. Pre-cut NavPod SystemPod for Garmin GPSMAP 8412xsv and 8612xsv right and 2 additional instruments (3.6″ holes) ) left. /9.5″ Wide Guard Technical Specifications

Type:	Boat Equipment \| /td>
Supplier:	NavPod

NavPod SystemPod pre-cut for Garmin GPSMAP 8412xsv and 8612xsv rightand 2 additional instruments (3.6″ holes) on Left for f/9.5″ Wide Guard User ReviewsNavPod SystemPre-cut Pod for Garmin GPSMAP 8412xsv and 8612xsv on Right and 2 additional instruments (3.6″ holes) on left f/9.5″ Wide Guard Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our return & refund policy here.