Pre-cut NavPod SystemPod for Garmin GPSMAP 923 923xsv 943 and 943xsv right and 2 instruments (3.6″ holes) f/9.5″ Wide Guard Boat Outfitting

Pre-cut SystemPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv on the right and 2 instruments (3.6″ holes) for 9.5″ wide protection

GP1080-35 for Sail: Pre-cut SystemPod for Garmin GPSMAP 923/923xsv/943/943xsv *right AND* two instruments (3.6″ holes) for 9.5″ wide protection

SystemPods are intended for mounting a radar or chartplotter and Instruments combined at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chart plotter and instruments together on the helm, where you can easily operate them and clearly see even the smallest details of the screen.

This SystemPod for The power supply can be mounted on the dashboard using the SK135. Stanchion kit, or mounted high using the SK129 stanchion kit.

Structural rigidity – Gen3 improvements include dnow a thicker gauge acrylic coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater waterproofing of the joint. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane seal isnow 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 steel hardware supplied with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security combined with a bit of style!

Commitment to quality

PRODUCT ID: 92179
SKU: NVN-92179
CSKU: CWR-92179
REWRITE: 103290-navpod-systempod-pre-cut-f-garmin-gpsmap-923-923xsv
MPN: GP1080-35
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NavPod SystemPod Pre-Cut f/Garmin GPSMAP 923, 923xsv, 943 & 943xsv right and 2 instruments (3.6″ holes ) f/9.5″ Wide Guard
NAME_EX: PRE-CUT NAVPOD SAILPOD FOR GARMIN 923/943XSV AND 2 INST
PTITLE: NavPod SystemPod Pre-Cut f/Garmin GPSMAP 923, 923xsv, 943 and 943xsv right and 2 instruments (3.6″ holes) f/9.5″ Wide Guard
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod - GP1080 SailPod Uncut f/9.5" Guard

Gtags:

Fish finder
Chartplotter

GSpecs:

Pre-Cut NavPod SystemPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv Right and 2 Instruments (3.6" Holes) f/9.5" Wide Guard Product Description

Pre-Cut SystemPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv on the right and 2 instruments (3.6″ holes) for 9.5″ wide protection

GP1080-35 for Sail: Pre-cut SystemPod for Garmin GPSMAP 923/923xsv/943 /943xsv *right AND* two instruments (3.6″ holes) for 9.5″ wide protection

SystemPods allow you to mount a radar or tracker maps and instruments together on the bar. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chart plotter and instruments together on the helm, where you can easily operate them and clearly see even the smallest details of the screen.

This SystemPod for the power supply can be mounted on the taon-board inspection using the SK135. Post Kit, or mounted high using the SK129 Post Kit.

Structural Rigidity – The Gen3 ImprovementProducts now include thicker gauge acrylic coated ABS material which improves strength and offers better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions.Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security combined with a little style!

Commitment to quality

Frequently Quesasked questions (FAQ) about the NavPod Pre-cut SystemPod f/Garmin GPSMAP 923, 923xsv, 943 and 943xsv right and 2 instruments (3.6″ holes) f/9.5″ Wide Guard Who is the NavPod?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique waterproof seal, build quality and attractive design make the best-built instrument case ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access.

Save $117 when you purchase the NavPod SystemPod pre-cut for Garmin GPSMAP 923, 923xsv, 943 and 943xsv right and 2 instruments (3, 6") ) f/9.5″ Wide Guardfor only $412 from NVN Marine! Same day dispatch before 3 p.m. Pre-cut NavPod SystemPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv right and 2 instruments (3.6″ holes) f/9.5″ Wide Guard Technical specifications

Type:	Boat outfitter \| Display Media
Supplier:	NavPod

Pre-cut NavPod SystemPod for Garmin GPSMAP 923, 923xsv, 943 and 943xsv right and 2 instruments (User reviews of the NavPod SystemPod system pre-cut f/Garmin GPSMAP 923, 923xsv, 943 and 943xsv right and 2 instruments (3.6″ holes) f/9.5″ Wide Guard Shipping & Return

For detailed shipping terms, please see our shipping policy and you can find our return & refund policy here .