Pre-cut NavPod SystemPod for Raymarine Axiom 7/Axiom+ 7 and 2 additional instruments Boat Outfitting
Pre-cut SystemPod for Raymarine Axiom 7/Axiom+ 7 & 2 Additional Instruments
Pre-cut SystemPod for Raymarine Axiom 7/Axiom+ 7 in the center AND 2 additional instruments (holes 3, 6″; one on each side) for 9.5" wide protection (requires Raymarine Front Mount Kit #A80498 for Axiom 7/Axiom+ 7 and right angle with NMEA 2000 connector) (pre-cut is for forward mounting)
SystemPods allow radar or chart plotter and instruments to be mounted together at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.
It is best to mount a SystemPod on a single-curvature AngleGuard.
Structural rigidity – ImprovementsGen3 rations now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for a larger watertight seal. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal polyurethane seal Poron Microcell is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue to do its job.
Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security combined with a bit of style!
Commitment to quality - We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.
PRODUCT ID: 93806
SKU: NVN-93806
CSKU: CWR-93806
REWRITE:104917-navpod-systempod-pre-cut-f- Raymarine-Axiom-7-Axiom-7
MPN: GP1600-17
UPC: 659988114522
ASIN: B07R9Z3Y6W
WSKU: NAVGP160017
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NAVPOD SYSTEM POD PRECUT FO AXIOM 7 OR PLUS & 2 INST
NAME_EX:
PTITLE: NavPod SystemPod Pre-Cut f/Raymarine Axiom 7/Axiom+ 7 and 2 additional instruments
TYPE: Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS
Gtags:
GSpecs:
NavPod Pre-cut SystemPod for Raymarine Axiom 7/Axiom+ 7 and 2 additional instruments Product description
Pre-cut SystemPod for Raymarine Axiom 7/Axiom+ 7 and 2 additional instruments
Pre-cut SystemPod for Raymarine Axiom 7/Axiom+ 7 in the center AND 2 additional instruments (3.6″ holes; one on each side) for 9.5" wide protection (requires Raymarine Front Mount Kit part number A80498 for Axiom 7 /Axiom+ 7 and Right Angle with NMEA 2000 connector (pre-cut for front mounting)
SystemPods are intended for mounting a radar or chartplotter and instruments together on the helm . Navigation at your fingertips… "Where you need it, when you need it." SystemPods are the smart solution for mounting your radar or chart plotter and instruments together on the helm, where you can easily place them. use and clearly see the fine details of the screenn.
It is best to mount a SystemPod on a single-bend AngleGuard.
Structural Rigidity – Gen3 improvements now include thicker gauge acrylic material. Applied ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.
Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. ImprovementsGen3 include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future to maintain your electronic devices. The seal will continue to do its job.
Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security combined with a bit of style!
Commitment to quality - We stand behind our commitment by offering a 10-year warrantyyears on all new NavPods Gen3.
Frequently asked questions (FAQ) about the NAVPOD SYSTEM POD PRECUT FO AXIOM 7 OR PLUS & 2 INST Who is the NavPod?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include a waterproof silicone seal, tamper-resistant clips for security and convenience, concealed wiring and clean installation for easy access.
Save $110 when you purchase the Pre-cut NavPod SystemPod for Raymarine Axiom 7/Axiom+ 7 and 2 additional instruments for only 359 $from NVN Marine! Same day dispatch before 3 p.m. Pre-cut NavPod SystemPod for Raymarine Axiom 7/Axiom+ 7 and 2 additional instruments Specificationtechnical tions
Type: | Boat equipment | Display Media |
---|---|
Supplier: | NavPod |
For detailed shipping policy, please check our shipping policy and you can find our return and refund policy here.
- Pre-cut NavPod SystemPod f/Raymarine Axiom 12 & Axiom+ 12 on the right and 2 additional instruments (3.6″ holes) on the left f/9.5″ Wide Guard
- Pre-cut NavPod SystemPod for Garmin GPSMAP 942xs 942 922xs and 922 and 2 instruments (3.6″ holes) f/9.5″ Wide Guard
- Pre-cut NavPod SystemPod for Garmin GPSMAP 923 923xsv 943 and 943xsv right and 2 instruments (3.6″ holes) f/9.5″ Wide Guard
- Pre-cut NavPod SystemPod for Garmin GPSMAP 923 923xsv 943 and 943xsv on the right and 1 additional instrument (3.6″ hole) on the left f/9.5″ Wide Guard
- Pre-cut NavPod SystemPod for Garmin GPSMAP 923 and 943xsv on the right and GHC 50 on the left for f/9.5" wide angle protection
- Pre-cut NavPod SystemPod f/Garmin GPSMAP 8412xsv & 8612xsv on the right and 2 additional instruments (3.6″ holes) on the left f/9.5″ Wide Guard
- Pre-cut NavPod SystemPod f/Garmin GPSMAP 8410xsv & 8610xsv on the right and 2 additional instruments (3.6″ holes) on the left f/9.5″ Wide Guard