Pre-cut NavPod SystemPod f/Raymarine Axiom 9/Axiom+ 9 on the right and 1 instrument (3.6″ hole) on the left f/12″ Wide Guard Boat Outfitting

Pre-cut SystemPod for Raymarine Axiom 9/Axiom+ 9 on the right and 1 instrument (3.6" hole) on the left for 12" wide protection (the pre-cut is for surface mounting using the rear mounting brackets)

SystemPods allow radar or chartplotter and instruments to be mounted together at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single-curvature AngleGuard.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allowsgreater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod first.enir to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightened than the screws used on our Traditional Series NavPod. For NavPods Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security combined with a bit of style!

Commitment to quality: We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

PRODUCT ID: 93573
SKU: NVN-93573
CSKU: CWR-93573
REWRITE: 104684-navpod-systempod-pre-cut-f- raymarine-axiom-9-axiom-9
MPN: GP2040-16
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: NAVPOD SYSTEM POD PRECUT FOR RAYMARINE AXIOM9(+) 1 INST
NAME_EX:
PTITLE: NavPod SystemPod Pre-Cut f/Raymarine Axiom 9/Axiom+ 9 right and 1 instrument (3.6 hole ″) on the left f/12″ Wide Guard
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

Gtags:

GSpecs:

NavPod Pre-cut SystemPod for Raymarine Axiom 9/Axiom+ 9 on the right and 1 instrument (3.6″ hole) on the left for 12″ wide protection Product description

Pre-cut SystemPod for Raymarine Axiom 9/Axiom+ 9 to right and 1 instrument (3.6″ hole) left f/12″ Wide Guard (precut is for surface mounting using the rear mounting brackets)

SystemPods are intended for mounting a radar or chart plotter and instruments together at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single-curvature AngleGuard.

Structural Rigidity – Gen3 improvements now include coated ABS materialThicker gauge acrylic green which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The betThe higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure is on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane seal is now 50% thicker and is notNot subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all hard 316 stainless steel hardware supplied with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security combined with a bit of style!

Commitment to quality: We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

Frequently Asked Questions (FAQ) About NAVPOD PRECUT POD SYSTEM FOR RAYMARINE AXIOM9(+) 1 INST Who is NavPod?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access.

Save $102 when you purchase the NavPod SystemPod pre-cut for Raymarine Axiom 9/Axiom+ 9 right and 1 instrument (3.6″ hole) left for /12″ Wide Guardfor only $357 from NVN Marine! Same day dispatch before 3 p.m. Pre-cut NavPod SystemPod f/Raymarine Axiom 9/Axiom+ 9 on the right and 1 instrument (3.6″ hole) on the left f/12″ Wide Guard Technical specifications

Type:	Boat outfitter \| Af supportsfile
Provider:	NavPod

NavPod SystemPre-cut Pod for Raymarine Axiom 9/Axiom+ 9 on the right and 1 instrument (3.6″ hole) on the left for f/12″ Wide Guard User reviewsNavPod SystemPre-cut Pod for Raymarine Axiom 9/Axiom+ 9 on the right & 1 instrument (3.6″ hole) on left f/12″ Wide Guard Shipping & Return

For detailed shipping policy see our shipping policy and you will find our return & refund policy here.