NavPod SystemPod Precut f/Simrad NSS12 evo3/B&G Zeus3 12 and 2 instruments (3.6″ holes) f/12″ Wide Guard Boat Outfitting

SystemPod Precut for Simrad NSS12 evo3/B & G Zeus3 12 and 2 instruments (3.6″ holes) for 12″ wide protection

SystemPods are intended for mounting a radar or chart plotter and Instruments assembled at the helm. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single-curvature AngleGuard.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flexing occurs when tightening and the morethe pressure on the joint is uniform. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SystemPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Nickel-plated, chrome-plated stainless steel– We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavP Gen3ods we supply tamper proof nickel chrome plated stainless steel screws for added security combined with a bit of style!

Commitment to quality

We back our commitment by offering a 10-year warranty on all new Gen3 NavPods.

Fits Simrad NSS12 evo3/B and G Zeus3 SystemPod Precut 12 and 2 instruments (3.6 holes inch), suitable for 12 inch wide protective cover SystemPods are used to install radar or chartplotter and instruments together in...
PRODUCT ID: 88609
SKU: NVN-88609
CSKU: CWR-88609
REWRITE: 99720-navpod-systempod-precut -f-simrad-nss12-evo3-b-g-zeus3
MPN: GP2170-16
UPC: 659988113983
ASIN: B07XLR174V
WSKU: NAVGP217016
SSKU:
KSKU :
GSKU:
MSKU:
LSKU:
NAME: NavPod SystemPod Precut f/Simrad NSS12 evo3/B&G Zeus3 12 & 2 Instruments (3.6″ holes) f/12″ Wide Guard
br> NAME_EX: NAVPOD SYSTEMPOD PRECUT FOR SIMRAD NSS12 EVO3 ZEUS EVO3
PTITRE: NavPod SystemPod Precut f/Simrad NSS12 evo3/B&G Zeus3 12 & 2 Instruments (3.6″ holes) f/12″ Wide Guard
TYPE : Boat layout | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS NavPod - GP2170 Grand Prix Series Uncut f/12" Pedestal Guards

Gtags:

Fish finder
Chartplotter

GSpecs:

NavPod SystemPod Precut f/Simrad NSS12 evo3/B&G Zeus3 12 & 2 Instruments (3.6″ holes) f/12″ Wide Guard Product description

SystemPod Precut for Simrad NSS12 evo3/B & G Zeus3 12 & 2 Instruments (3.6″ holes) for 12″ wide protection

SystemPods are intended for mounting a radar or chartplotter and instruments together at the bar. Navigation at your fingertips… "Where you need it, when you need it. » SystemPods are the smart solution for mounting your radar or chartplotter and instruments together on the helm, where you can easily operate them and clearly see the fine details of the screen.

It is best to mount a SystemPod on a single-curvature AngleGuard.

Structural Rigidity – Gen3 enhancements now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This material morethick allows greater sealing. The better the structural rigidity, the less flexing when tightening and the greater the uniformity or pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SystemPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SystemPods are designed to withstand the harshest wet offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to openr the SystemPod in the future to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large Round Head Tamper Proof Screw Sockets are deeper for the NavPod Wrench for better holding power when tightening than the screws used on our Traditional Series NavPod. For NavPods Gen3, we provide tamper-proof nickel-chrome-plated stainless steel screws for added security and a bit of style!

Commitment to quality

We back our commitment by offering a 10-year warranty on all new Gen3 NavPods.

Fits Simrad NSS12 evo3/B and G Zeus3 SystemPod Precut 12 and 2 instruments (3, 6 inch), fits 12 inch wide instruments protective cover SystemPods are used to install a radar or chart plotteres and instruments together in...

Frequently asked questions (FAQ) about NavPod SystemPod Precut f/Simrad NSS12 evo3/B&G Zeus3 12 & 2 Instruments (3.6″ holes) f/ 12″ Wide Guard Who is the NavPod?
How to describe the NavPod SystemPod Precut f/Simrad NSS12 evo3/B&G Zeus3 12 & 2 Instruments (3.6″ holes) f/12″ Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod SystemPod Precut f/Simrad NSS12 evo3/B&G Zeus3 12 & 2 Instruments (3.6 inch holes) f/12″ Wide Guard? Suitable for Simrad NSS12 evo3/B instrumentsand G Zeus3 SystemPod Precut 12 and 2 (3.6 inch holes), suitable for 12 inch wide protective cover. SystemPods are used to install radar or chartplotter and instruments together in...

Save $125 when you purchase the NavPod SystemPod Precut f/Simrad NSS12 evo3/B&G Zeus3 12 & 2 Instruments (3.6″ holes) f/12″ Wide Guardfor only $404 from NVN Marine! Same shipping possible before 3 p.m. NavPod SystemPod Precut f/Simrad NSS12 evo3/B&G Zeus3 12 & 2 Instruments (3.6″ holes) f/12″ Wide Guard Technical specifications

Type:	Boat outfitter \| Display Media
Supplier:	NavPod

NavPod SystemPod Precut f/Simrad NSS12 evo3/B&G Zeus3 12 & 2 Instruments (3.6″ holes) f/12″ Wide Guard User reviewsNavPod SystemPod Precut f/Simrad NSS12 evo3/B&G Zeus3 12 & 2 Instruments (3.6″ holes)f/12″ Wide Guard Shipping & Return

For detailed shipping policy, please see our shipping policy and you can find our return & refund policy here.