Sale!

Pre-cut NavPod SailPod for Garmin GPSMAP 942xs 942 922xs and 922 f/9.5″ Wide Guard

$95

SKU: Pre-cut NavPod SailPod for Garmin GPSMAP 942xs 942 922xs and 922 f/9.5″ Wide Guard
Category:

Pre-cut NavPod SailPod for Garmin GPSMAP 942xs 942 922xs and 922 f/9.5″ Wide Guard Boat Outfitting

Pre-cut SailPod for Garmin GPSMAP 942xs, 942, 922xs and 922 for 9.5″ wide protection

SailPods are intended for mounting a single radar or chart plotter at the helm. Navigation at your fingertips. "Where you need it…when you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see small details on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a single bend AngleGuard or use a double bend AngleGuard toinstall an InstrumentPod on the top vertical section and a SailPod below on the inclined section. resistance and offers better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All SailPods are manufactured with a double seal system providing a excellent sealing. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest offshore sailing conditions.hard and damp. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "defined compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to service your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide tamper-resistant nickel-chrome-plated stainless steel screws for added security combined with a little style!

Commitment to qualityity- NavPod backs its commitment by offering a 10-year warranty. warranty on all new NavPods Gen3.



Navigation at your fingertips. "In case of need...in case of need." Sail Pods are a smart solution for installing a radar or chart plotter at the helm station. You can...
PRODUCT ID: 71964
SKU: NVN-71964
CSKU: CWR-71964
REWRITE: 83075-navpod-sailpod-pre-cut-f-garmin-gpsmap-942xs -942
MPN: GP1800-08
UPC: 659988114546
ASIN: B07XV87P2L
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Pre-cut NavPod SailPod for Garmin GPSMAP 942xs, 942, 922xs and 922 f/9.5″ Wide Guard
EX_NAME: PRE-CUT NAVPOD SAILPOD FOR GARMIN GPSMAP 942XS/942/922XS/
PTITRE : NavPod SailPod Pre -Cut f/Garmin GPSMAP 942xs, 942, 922xs and 922 f/9.5″ Wide Guard
TYPE: Boat equipment | Display Stands
SELLER: NavPod
ELECTRONICS> ELECTRONICS MARINE NavPod SailPod Pre-Cut f/Garmin GPSMAP 942xs, 942, 922xs 922 f/9.5 Wide Guard

Gtags:
Boat

GSpecs:

NavPod Pre-cut SailPod for Garmin GPSMAP 942xs, 942, 922xs and 922 f/9.5" Wide Guard Product description

Pre-cut SailPod for Garmin GPSMAP 942xs, 942, 922xs and 922 for 9.5" large The Guard

SailPods allow you to mount a single radar or chart plotter at the helm. Navigation at your fingertips. "Where you need it…when you need it." Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see small details on the screen. NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, NavPods protect your electronic devices from the harshest and wettest offshore sailing conditions. It is preferable tomount a SailPod on a single curvature AngleGuard or use a double curvature AngleGuard to install an InstrumentPod on the upper vertical section and SailPo.d below on the inclined section.

Rigidity Structural – Gen3 enhancements now include thicker gauge acrylic-coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal – All SailPods are manufactured with a double seal system providing a excellent sealing. This seal offers the best protection ofyour marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poran Microcell polyurethane seal is now 50% thicker and is not subject to "retentive compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. For NavPods Gen3, we provide steel tamper-proof screwsnickel-chrome-plated stainless steel for added safety combined with a bit of style!

Commitment to quality - NavPod backs its commitment by offering a 10-year warranty. warranty on all new NavPods Gen3.



Navigation at your fingertips. "In case of need...in case of need." Sail Pods are a smart solution for installing a radar or chart plotter at the helm station. You can...

Frequently asked questions (FAQ) about the NavPod SailPod Pre-Cut f/Garmin GPSMAP 942xs, 942, 922xs & 922 f /9.5″ Wide Guard Who is the NavPod?
How to describe the NavPod SailPod Pre-Cut f/Garmin GPSMAP 942xs, 942, 922xs and 922 f/9.5″ Wide Guard?
Is it cut or uncut?
How to mount or what is the mounting style of the NavPod SailPod Pre-Cut f/Garmin GPSMAP 942xs, 942, 922xs and 922 f/9.5″ Wide Guard?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS.The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal, tamper-proof clips for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod SailPod Pre-Cut f/Garmin GPSMAP 942xs, 942, 922xs & 922 f/9.5″ Wide Guard? Navigation at your fingertips. "In case of need...in case of need." Sail Pods are a smart solution for installing a radar or chart plotter at the helm station. You can... Is it cut or not? Cut How to mount or what is the mounting style of the NavPod SailPod Pre-Cut f/Garmin GPSMAP 942xs, 942, 922xs & 922 f/9.5″ Wide Guard? Pedestal

Save $95 when you purchase the pre-cut NavPod SailPod for Garmin GPSMAP 942xs, 942, 922xs and 922 f/9.5″Wide Guardfor only $334 from NVN Marine! Same day dispatch before 3 p.m. NavPod SailPod Pre-Cut f/Garmin GPSMAP 942xs, 942, 922xs & 922 f/9.5″ Wide Guard Technical Specifications
Type:

Boat Outfitter | Display Media

Supplier:

NavPod

Weight:

4.05 lbs

Cut/Uncut:

Cut out

Mounting style:

Base

NavPod SailPod Pre-cut for Garmin GPSMAP 942xs, 942, 922xs & 922 f/9.5″ Wide Guard User ReviewsNavPod SailPod Pre-cut for Garmin GPSMAP 942xs, 942, 922xs & 922 f/9.5″ Wide Guard Shipping & Returns
Shipping Weight:

4.05 lbs

Box sizes:

7.00 (h) x 10.00 (w) x 14.00 (w)

Cubic feet:

980.0

Returnable:

Yes

To know detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.