Pre-cut NavPod SailPod for Raymarine Axiom 12 and Axiom+ 12 f/12″ Wide Guard (pre-cut for surface mounting using rear mounting brackets) Boat Outfitting

Pre-cut SailPod for Raymarine Axiom 12 and Axiom+ 12 for 12" wide protection (pre-cut for surface mounting using rear mounting brackets)

SailPods are intended for mounting a single radar or chart plotter at the helm. Navigation at your fingertips… "Where you need it, when you need it." SailPods are the smart solution for mounting. your radar or chart plotter to the helm, where you can easily operate it and clearly see every minute detail of the screen. NavPods have a high gloss finish, giving you a clean mounting solution while hiding unsightly wires. Tamper-proof nickel-chrome screws provide a little bling and a lot of security Designed with a double-seal waterproof seal, NavPods protect your electronics from the harshest, wettest offshore sailing conditions. a Single Bend AngleGuard or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above on the straight section.

Structural Rigidity – The Gen3 Enhancement Elements now include acrylic-coated ABS material thicker gauge which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing an excellent seal. This seal provides the best protection for your marine electronics. SailPods are designed to withstand the harshest offshore sailing conditions.more difficult and humid. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to operate the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Nickel-Chrome Plated Stainless Steel Tamper Proof Screws provide security combined with a little style!

Commitment to Quality – We stand behind our commitment by offering a 10-year warranty years on all new NavPods Gen3.

PRODUCT ID: 92182
SKU: NVN-92182
CSKU: CWR-92182
REWRITE: 103293-navpod- sailpod-pre-cut-f-raymarine- axiom-12
MPN: GP2050-15
UPC:
ASIN:
WSKU: NAVGP205015
SSKU:
KSKU:
GSKU:
MSKU:
LSKU: NAME: NavPod SailPod Pre-Cut for Raymarine Axiom 12 and Axiom+ 12 f/12″ Wide Guard (Pre-Cut for Surface Mount with Rear Mount Brackets)
NAME_EX: NAVPOD SAILPOD PRE-CUT FOR RAYMARINE AXIOM 12/AXIOM+ 12
PTITLE: Pre-Cut NavPod SailPod for Raymarine Axiom 12 and Axiom+ 12 f/12″ Wide Guard (Pre-Cut for Surface Mount Using Rear Mounting Brackets)
TYPE: Boat Equipment | Display Stands
SELLER: NavPod
ELECTRONICS> MARINE ELECTRONICS

NavPod GP2050-15 SailPod for Raymarine Axiom 12

Gtags:

Raymarine
Fish finder
Chartplotter

GSpecs:

NavPod Pre-cut SailPod for Raymarine Axiom 12 and Axiom+ 12 f/12" Wide Guard (pre-cut for surface mounting using rear mounting brackets) Product Description

Pre-cut SailPod for Raymarine Axiom 12 and Axiom+ 12 for 12″ wide protection (pre-cut for surface mounting using rear mounting brackets)

SailPods are intended for mounting a single radar or plotter charts at the helm. Navigation at your fingertips… "Where you need it, when you need it." SailPods are the smart solution for mounting your radar or chartplotter at the helm, where you can easily locate it. Use and clearly see every detail of the screen NavPods have a high-gloss finish, giving you a clean mounting solution while hiding unsightly wires. The tamper-proof nickel chrome screws provide a little bling and a lot of security. Designed with a double waterproof seal.attached, NavPods protect your electronic devices from the harshest and wet offshore sailing conditions. A SailPod is best mounted on a Single Bend AngleGuard, or on the angled section of a Double Bend Angle Guard with an InstrumentPod mounted above on the straight section.

Structural Rigidity - Improvements Gen3 now include thicker gauge acrylic coated ABS material which improves strength and provides better structural rigidity. This thicker material allows for greater sealing. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. The excellent UV stability of acrylic is combined with the durability of ABS. Acrylic cap protects ABS from UV and its potentially damaging effects on plastic.

Waterproof Seal – All SailPods are manufactured with a double seal system providing aexcellent sealing. This seal provides the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The internal Poron Microcell polyurethane gasket is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The seal will continue to do its job.

Chrome Nickel Plated Stainless Steel – We use all 316 stainless steel hardware that comes with every NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional series NavPod. Tamper-proof steel screwsNickel-chrome-plated stainless steel offer safety combined with a little style!

Commitment to quality – We stand behind our commitment by offering a 10-year warranty on all new NavPods Gen3.

Frequently Asked Questions (FAQ) About NavPod Pre-Cut SailPod for Raymarine Axiom 12 and Axiom+ 12 f/12″ Wide Guard (Pre-Cut for Surface Mount Using Rear Mounting Brackets) Who is the NavPod?
How to describe the Pre-Cut SailPod NavPod for Raymarine Axiom 12 and Axiom+ 12 f/12″ Wide Guard (Pre-Cut for surface mounting using rear mounting brackets)?
Who is the NavPod? Navpod is a better way to mount your fishfinder, radar or GPS. The unique watertight seal, build quality and attractive design make the best-built instrument housing ever available to the marine industry. Features of all Navpods include waterproof silicone seal,s tamper-evident for added security and convenience, concealed wiring and clean installation for easy access. How to describe the NavPod SailPod Pre-Cut f/Raymarine Axiom 12 & Axiom+ 12 f/12″ Wide Guard (Pre-cut for surface mounting using rear mounting brackets)? "

NAVGP205015 SailPod

Model: GP2050-15

Pre-cut SailPod for Raymarine AXIOM 12 for 12? wide protection (pre-cut is intended for surface mounting using rear mounting brackets)

SailPods are intended for mounting a single radar or chart plotter to the helm. Navigation at your fingertips. "Where do you need it? When you need it". Sail Pods are the smart solution for mounting your radar or chartplotter to the helm where you can easily operate it and clearly see the small details of the screen. The NavPod have a high gloss finish, providing you with a moClean cleaning while hiding unsightly wires. Nickel-chrome plated tamper-resistant screws provide a little bling and a lot of security. Designed with a double-seal waterproof seal, the NavPod protects your electronic devices from the harshest and wettest offshore sailing conditions. It is best to mount a SailPod on a single curvature AngleGuard or use a double curvature AngleGuard to mount an InstrumentPod on the top vertical section and a SailPod below on the inclined section.

Structural rigidity – Gen3 improvements now include thicker support. Gauge acrylic coated ABS material that improves strength and provides better structural rigidity. This thicker material allows for a greater amount of water proof seal. The higher the structural rigidity, the less flex there is when tightening and the more uniform the pressure on the joint. Excellent stabilityUV protection of acrylic is combined with the durability of ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic.

Waterproof seal — All SailPods are manufactured with a double seal system providing an excellent seal. This seal offers the best protection for your marine electronics. SailPods are designed to withstand the harshest and wettest offshore sailing conditions. Gen3 improvements include a thicker silicone outer gasket with an improved flush fit. The Poran Microcell Polyurathane internal seal is now 50% thicker and is not subject to "compression" like many rubber compounds. This is important when you need to open the SailPod in the future in order to repair your electronic devices. The gasket will continue to do its job.

Nickel-Chrome Plated Stainless Steel — We This is all stainless steel hardwaree 316 supplied with each NavPod. Large round head tamper-proof screws have deeper sockets for the NavPod wrench for better holding power when tightening than the screws used on our traditional NavPod series. For the NavPod Gen3, we provide tamper-resistant, nickel-chrome-plated stainless steel screws for added security combined with a little style!

Commitment to Quality We stand behind our commitment by offering a 10 year warranty. warranty on all new NavPod Gen3.

Specifications

Overall
Height	11
Width	15.125
Depth	6,375
Usable side
Height	8.75
Widthr	12.75
Depth	5
Maximum cutout
Height	9
Width	13

"

Save $106 with the purchase of the Pre-cut NavPod SailPod for Raymarine Axiom 12 and Axiom+ 12 f/12″ Wide Guard (pre-cut for surface mounting using rear mounting brackets) for only $343from NVN Marine! Same day shipping before 3pm Pre-cut NavPod SailPod for Raymarine Axiom 12 and Axiom+ 12 f/12″ Wide Guard (pre-cut for surface mounting using rear mounting brackets) Technical Specifications

Type:	Boat Equipment \| Display Stands
Supplier:	NavPod

NavPod SailPod pre-cut for Raymarine Axiom 12 and Axiom+ 12 f/12″ large Protection (pre-cut forr surface mount using rear mounting brackets) User ReviewsNavPod SailPod pre-cut for Raymarine Axiom 12 & Axiom+ 12 f/12″ Wide Guard (pre-cut f/surface mounting using rear mounting brackets) Shipping and return