Sale!

PSS PRO shaft seal 2-1/2" shaft and 3-1/2" tube

$94

SKU: PSS PRO shaft seal 2-1/2" shaft and 3-1/2" tube
Category:

PSS PRO shaft seal 2-1/2" shaft and 3-1/2" tube Marine Hardware

PSS Pro Shaft Seal - 2 1/2" Shaft and 3 1/2" Tube

The PSS PRO Shaft Seal is a mechanical seal using our proven stainless steel. and carbon sealing components, but adds a reinforced silicone bellows, we include external rings standard on +2-1/4" sizes and optional on all smaller sizes, a shaft retention collar secondary, 316 stainless steel hose clamps (rolled edges and non-perforated) and an optional Nitronic 50 rotor upgrade (for highly corrosive environments Designed specifically for applications that will require increased durability and strength). to harsh, corrosive, high pressure and otherwise demanding environments The PSS PRO shaft seal is a specialized mechanical seal that is suitable for a variety of applications, with unrivaled performance.

Like seals. PSS type A and B, PRO shaft seal is a sealmechanical facial. The sealing surface is created between the flat surfaces of the rotating part. stainless steel rotor and carbon stationary fLange. The fixed carbon bridle is attached to a heavy duty silicone bellows which is secured to the vessel's stern tube (shaft log), with 316SS hose clamps. The stainless steel rotor is mounted on the shaft in front of the carbon flange and is used to compress the bellows, the rotor is then attached to the shaft with set screws and the shaft retention collar is installed. This compression (preload) maintains constant contact between the two contact faces of the stainless steel rotor and the carbon flange, allowing the PSS to compensate for the variable axial movement due to propeller thrust. The carbon flange is overbored relative to the shaft diameter, which allows it to "float" around the shaft and thus compensate for most misalignments and vibrations in the transmission.The stainless steel rotor is sealed to the shaft by two O-rings recessed into the rotor bore. These O-rings rotate with the stainless steel shaft and rotor and therefore experience no wear during operation.

Specifications

  • Limitations Temperature Limits: -13°F to 425°F (-25°C to 220°C)
  • Pressure Limits: 40 PSI (2.75 BAR)
  • Rpm Limits shaft speed: 10,000 rpm
  • Carbon graphite: lapped to 4 HLB (0.000044" tolerance)
  • 316SS / Nitronic 50:Face 9 Ra
  • Bellows Material: Molded Formed Silicone/Fabric

Product Dimensions

  • Shaft diameter (A) 2-1/2"
  • Stern tube diameter. (B) 3-1/2" to 3-5/8"
  • Uncompressed length (C) 9.800"
  • Approx. compressed length 8.800"
  • Rotor Diameter (D) 4.2"
  • Rear Sleeve Length (E) 1.3"


PSS Pro Shaft Seal - A2 1/2" Shaft and 3 1/2" TubeThe PSS PRO shaft seal is a mechanical seal, using our proven stainless steel and carbon components,...
PRODUCT ID: 86320
SKU : NVN-86320
CSKU: CWR-86320
REWRITE: 97431-pss-pro-shaft-joint-2-1-2-shaft
MPN: 03-212-312
UPC:
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: PSS PRO Shaft Seal 2-1/2" Shaft & 3-1/2" Tube
NAME_EX: PSS PRO SHAFT SEAL 2 1/2" SHAFT AND 3 1/2" TUBE
PTITRE: PSS PRO Shaft Seal 2-1/2" Shaft & 3-1 /2" Tube
TYPE: Marine Hardware | Shaft Seals
SUPPLIER: PSS Shaft Seal
SPORTING GOODS> OUTDOOR RECREATION> BOATING & WATER SPORTS

Gtags:

GSpecs:

PSS PRO Shaft Seal - 2-1/2" Shaft and 3-1/2" Tube Product Description

PSS Pro Shaft Seal - 2 1/2" Shaft and 3-1/2" Tube 3 1/2"

The PSS PRO shaft seal is a mechanical seal using our proven stainless steel and carbon sealing components, but adds a reinforced silicone bellows, we include standard outer rings on +2-1/4" sizes and optional on all smaller sizes, secondary shaft retention collar, 316 stainless steel hose clamps (rolled edges and non-perforated) and an optional Nitronic 50 rotor upgrade (for highly corrosive environments). Designed specifically for applications that will require increased durability and resistance to harsh, corrosive, high pressure and otherwise demanding environments. PSS PRO shaft seal is a specialist mechanical seal that is suitable for a variety of applications, with punrivaled performance.

As with type A and B PSS seals, the PRO Shaft Seal is a mechanical seal. The sealing surface is optimally created between the flat surfaces of the rotating stainless steel rotor and the fixed carbon flange. The fixed carbon bridle is attached to a heavy duty silicone bellows which is secured to the vessel's stern tube (shaft log), with 316SS hose clamps. The stainless steel rotor is mounted on the shaft in front of the carbon flange and is used to compress the bellows, the rotor is then attached to the shaft with set screws and the shaft retention collar is installed. This compression (preload) maintains constant contact between the two contact faces of the stainless steel rotor and the carbon flange, allowing the PSS to compensate for the variable axial movement due to propeller thrust. The carbon flange is overbored relative to the diameter of the shaft, which allows it to "float" auround the shaft and thus compensate for most misalignments and vibrations in the transmission. The stainless steel rotor is sealed to the shaft by two O-rings recessed into the rotor bore. These O-rings rotate with the stainless steel shaft and rotor, and therefore do not suffer wear during operation.

Specifications

  • Temperature Limits: -13°F to 425°F (-25°C to 220°C)
  • Pressure Limits: 40 PSI (2.75 BAR)
  • Limits Shaft RPM: 10,000 rpm
  • Carbon Graphite: Lapped to 4 HLB (0.000044" tolerance)
  • 316SS / Nitronic 50:Face 9 Ra
  • Bellows Material: Silicone/Molded Formed Fabric

Product Dimensions

  • Shaft Diameter (A) 2-1/2"
  • Stern tube. Dia. (B) 3-1/2" to 3-5/8"
  • Uncompressed length (C) 9.800"
  • Approx. compressed length 8.800"
  • Rotor diameter (D) 4.2"
  • Rear Sleeve Length (E) 1.3"


PSS Pro Shaft Seal - 2 1/2" Shaft and 3 1/2" TubeThe PSS PRO shaft seal is a mechanical seal, using our proven stainless steel and carbon components,...

Frequently Asked Questions (FAQ) about shaft seal PSS PRO 2-1 Shaft/ 2" Shaft & 3-1/2" Tube Who is PSS Shaft Seal?
How to describe PSS PRO Shaft Seal 2-1/2" Shaft and 3-1/2" tube?
Who is the PSS Shaft Seal? The PSS Shaft Seal is the world's best-selling marine mechanical seal and is installed as standard equipment by many of the world's most renowned shipyards and boat builders. b> is also recognized as the leading retrofit (aftermarket) seal in the global market. How to describe the PSS PRO 2-1/2" Shaft Seal and 3-1/2" PSS Pro Tube? "shaft and tube 3 1/2"The PSS PRO shaft seal is a mechanical seal, using our proven stainless steel componentsreliable and made of carbon,...

Save $205 when you purchase the PSS PRO shaft seal for 2-1/2" shaft and tube of 3-1/2"for only $822 at NVN Marine, fast and free same day delivery before! 3:00 p.m. PSS PRO Shaft Seal 2-1/2" Shaft and 3-1/2" Tube Videos PSS PROt Seal Shaft 2-1/2" Shaft and 3-1/2" Tube Technical Specifications
Type:

Marine equipment | Shaft Seals

Supplier:

PSS Shaft Seal

PSS PRO Shaft Seal, 2-1/2" Shaft and 3-1/2" Tube User ReviewsPSS PRO Shaft Seal, 2-1/2" Shaft and 3-1/2" tube Shipping & Returns

For detailed shipping terms, please see our shipping policy and you can find our returns & refund policy here.