PSS PRO shaft seal 2" shaft and 3" tube Marine Hardware

PRO shaft seal for 2" shaft and 3" tube

The PSS PRO shaft seal is a mechanical seal using our proven sealing components stainless steel and carbon, but adds a reinforced silicone boot, we include external rings standard on +2-1/4" sizes and optional on all smaller sizes, secondary shaft retention collar, 316 stainless steel hose clamps (rolled, non-perforated edges) and an optional upgraded Nitronic 50 rotor (for highly corrosive environments). , corrosive, high pressure and otherwise demanding The PSS PRO shaft seal is a specialized mechanical seal that is suitable for a variety of applications with unrivaled performance.

Like PSS Type A seals. and B, the PRO shaft seal is a mechanical seal.Sealing surface is created between the flat surfaces of the rotating stainless steel rotor and the stationary carbon. The bridle.The carbon onary bridle is attached to a heavy duty silicone bellows which is secured to the vessel's stern tube (shaft log), with 316SS hose clamps. The stainless steel rotor is mounted on the shaft in front of the carbon flange and is used to compress the bellows, the rotor is then attached to the shaft with set screws and the shaft retention collar is installed. This compression (preload) maintains constant contact between the two contact faces of the stainless steel rotor and the carbon flange, allowing the PSS to compensate for the variable axial movement due to propeller thrust. The carbon flange is overbored relative to the shaft diameter, which allows it to "float" around the shaft and thus compensate for most misalignments and vibrations in the transmission. The stainless steel rotoris sealed to the shaft by two O-rings embedded in the rotor bore. These O-rings rotate with the stainless steel shaft and rotor and therefore do not suffer wear during operation.

SSpecifications:

Temperature Limits: -13°F to 425°F (-25°C to 220°C)
Pressure Limits: 40 PSI (2.75 BAR)
Shaft RPM Limits: 10,000 RPM
Carbon Graphite: Lapped to 4 HLB (0.000044" Tolerance)
316SS / Nitronic 50: Face to 9 Ra
Bellows Material: Molded Formed Silicone/Fabric

Product Dimensions:

Shaft diameter (A) 2"
Stern tube diameter. (B) 3" to 3-1/8"
Uncompressed length (C) 9.268"
Compressed length approximately 8.268"
Rotor diameter ( D ) 3.75"
Rear sleeve length (E) 1.3"

PRO shaft seal 2" shaft and 3" tube The PSS PRO shaft seal is an extrmechanical face seal that uses our reliable stainless steel and carbon components, but adds reinforcement... -pro-shaft-joint-2-shaft
MPN: 03-200-300
UPC: 015568070020
br> ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: PSS PRO Shaft Seal 2" Shaft & 3" Tube
NAME_EX: PSS PRO SHAFT SEAL 2" SHAFT AND 3" TUBE
PITTER: PSS PRO Shaft Seal 2" shaft and 3" tube
TYPE: Marine hardware | Shaft Seals
SUPPLIER: PSS Shaft Seal
SPORTING GOODS> OUTDOOR RECREATION> BOATING & WATER SPORTS

Gtags:

GSpecs:

PSS PRO shaft seal for 2" shaft and 3" tube Product description

PRO shaft seal for 2" shaft and 3" tube

The PSS PRO shaft seal is a mechanical seal. Using our proven stainless steel and carbon sealing components but adds a reinforced silicone bellows, we include external rings standard on +2-1/4" sizes and optional on all smaller sizes, a collar secondary shaft retention, 316 stainless steel hose clamps (rolled, non-perforated edges), and an optional Nitronic 50 rotor upgrade (for highly corrosive environments Designed specifically for applications that will require durability). and increased resistance to harsh, corrosive, high pressure and otherwise demanding environments a specialized mechanical seal that is suitable for a variety of applications, with unrivaled performance.

Like PSS type seals.A and B, the PRO shaft seal is a mechanical seal. The sealing surface is created between the mechanical seal. flat surface of the rotating stainless steel rotor and the fixed carbon flange. The fixed carbon bridle is attached to a heavy duty silicone bellows which is secured to the vessel's stern tube (shaft log), with 316SS hose clamps. The stainless steel rotor is mounted on the shaft in front of the carbon flange and is used to compress the bellows, the rotor is then attached to the shaft with set screws and the shaft retention collar is installed. This compression (preload) maintains constant contact between the two contact faces of the stainless steel rotor and the carbon flange, allowing the PSS to compensate for the variable axial movement due to propeller thrust. The carbon flange is overbored relative to the diameter of the shaft, which allows it to "float" around the shaft and thus compensate for most misalignments.nts and vibrations of the transmission. The stainless steel rotor is sealed to the shaft by two O-rings recessed into the rotor bore. These O-rings rotate with the shaft and stainless steel rotor, and therefore do not suffer wear during operation.

Specifications:

Temperature Limits: -13°F to 425°F (-25°C to 220°C)
Pressure Limits: 40 PSI (2.75 BAR)
Shaft RPM Limits: 10,000 RPM
Carbon Graphite: Lapped to 4 HLB (0.000044" tolerance)
316SS / Nitronic 50: Facing 9 Ra
Bellows Material: Molded Formed Silicone/Fabric

Product Dimensions:

Shaft diameter (A) 2"
Stern tube diameter. (B) 3" to 3-1/8"
Uncompressed length (C) 9.268"
Compressed length approximately 8.268"
Rotor diameter ( D ) 3.75"
Rear Sleeve Length (E) 1.3"

JointPRO Shaft Seal 2" Shaft and 3" Tube The PSS PRO Shaft Seal is a mechanical end face seal that uses our reliable stainless steel and carbon components, but adds reinforcement...

Frequently Asked Questions (FAQ) About PSS PRO Shaft Seal 2" Shaft and 3" Tube Who is PSS Shaft Seal?
How to describe PSS PRO 2" Shaft Seal and Tube 3"?
Which is the PSS shaft seal? The PSS Shaft Seal is the world's best-selling marine mechanical seal and is installed as standard equipment by many of the world's leading shipyards and boat builders. The PSS Shaft Seal is also recognized as the leading retrofit (aftermarket) seal in the global market. How to describe the PSS PRO shaft seal for 2" shaft and 3" tube? PRO Shaft Seal 2" Shaft and Tube 3" The PSS PRO Shaft Seal is a mechanical end seal that uses our reliable stainless steel components andcarbon, but adds reinforcement...

The PSS PRO shaft seal is a mechanical face seal using our proven stainless steel and carbon sealing components, but adds a reinforced silicone bellows.
We include standard outer rings on sizes

This mechanical seal face seal is manufactured from stainless steel and aluminum sealing components. carbon with a reinforced silicone bellows.
External rings are included on all sizes.

The PSS PRO shaft seal is a mechanical face seal Using our proven stainless steel and carbon sealing components, but adds a reinforced silicone bellows, we include standard outer rings on sizes
The PSS PRO shaft seal can be used in many applications such as:
Pump shaft seals
Engine shaft seals
Turbine shaft seals

Save $167 when you purchase the PSS PRO Shaft Seal, 2" Shaft and 3" Tube for only 670 $from NVN Marine! Free same day delivery before 3 p.m. PSS PRO Shaft Seal Videos for 2" Shaft and 3" Tube PSS PRO Shaft Seal Technical Specifications for 2" Shaft and 3" Tube

Type :	Marine Equipment \| Shaft Seals
Supplier:	PSS Shaft Seal

PSS PRO Shaft Seal, 2" Shaft and 3" Tube User ReviewsPSS PRO Shaft Seal, 2" Shaft and 3" Tube Shipping & Returns

For know the detailed shipping policy, please see our shipping policy and you can find our return and refund policy here.