R&D Engine Mount with 6.85" Footprint - 5/8" Stud - 120 to 410 lb. Capacity per Bracket (Yanmar***) Marine Hardware

Motor mount with 6.85" footprint - 5/8" stud - 120 to 410 lb capacity per mount

*** Designed as a rear mount for the Yanmar 4JH series engine

R&D marine engine mounts are designed specifically for the rigors of marine applications. The mounts are rigid enough to absorb thrust from the fore and aft propeller, but soft enough to isolate transmission vibrations from the hull.

To help increase the longevity of the mounts, all parts in steel are zinc plated and pasivated to limit corrosion. . The rubber component is coated with an oil shield to protect it from petroleum-based products.

R&D Marine mounts are preloaded based on the combined weight of the engine and transmission to limit movement of the engine. For ease of installation, the brackets are height adjustable and the mounting holes in the base of the bracket are slottedus to facilitate transmission alignment.

How to select (details required):
1.Define the overall weight of the engine and transmission.
2.Determine 60% of the total weight then divide by 2 to determine the capacity of each of the rear mounts (the mounts on the transmission side of the engine).
3.Determine 40% of the total weight then divide by 2 to determine the capacity of each of the front brackets (the brackets opposite the transmission side of the engine).
4.Determine the necessary stud diameter and bracket footprint.
br> 5. Choose the most appropriate size bracket for the weight per support. When possible, choose the bracket closest to the middle of the weight range.

Example:
The weight of the motor is 480 lbs, the weight of the transmission is 110 lbs, footprint is 4", stud diameter is 5/8".
Total weight is 590 lbs.
590 x 0.6/2 = 177 lbs by rear support. The knowledgepport requirements are 800-010
590 x 0.4/2 = 118 lbs per rear support. Required brackets are 800-037

Why R&D Marine Engine Mounts?

Designed for marine use, accepts propeller thrust and motor in both directions.ns
Offers a fail-safe design
R&D marine mounts are height adjustable
Pre-loaded to reduce movement
Olonged holes in the base for easy alignment
Mounting types suitable for all applications

What is more interesting and more meaningful than sailing in open water? This is a great solution to meet your boating needs. This product is ideal for use in all marine equipment.
PRODUCT ID: 54891
SKU: NVN-54891
CSKU: CWR-54891
REWRITE: 66002-r-d-engine-mount-w-6-85-footprint
MPN: 800- 011Y
UPC: 839662000253
ASIN: B00C1G5Q0A
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: R&D Engine Mount with 6.85" Footprint - 5/8" Stud - 120 to 410 lb Capacity per Bracket (Yanmar***)
EX_NAME: R&D ENGINE BRACKET WITH 6. 85" 5/8" STUD, 120-410 LB
PTITRE: R&DEngine mount with 6.85" footprint - 5/8" stud - 120 to 410 lb capacity per bracket (Yanmar***)
TYPE: Marine hardware | Engine Mounts
SELLER: R&D Marine
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES> WATERCRAFT ENGINE PARTS
Sports
R&D Motor Mount with 6.85" Footprint - 5/8" Stud - 120 to 410 lb. Capacity per Bracket (Yanmar (54891)
R&D Motor Mount with 6.85" Footprint - 5/8" Stud 5/8" - 120 to 410 lb Capacity per bracket (Yanmar***) - 800-011Y
Sports
Gtags:

GSpecs:

R&D Engine Mount with 6.85" Footprint - 5/8" Stud - 120 to 410 lb. Capacity per Bracket (Yanmar***) Product Description 6.85" Footprint Motor Mount - 5/8" Stud 5/8" - 120- 410 lb capacity per bracket

*** Designed as a rear bracket for the Yanmar 4JH series engine

>R&D marine engine mounts are designed specifically for the rigors of marine applications. The mounts are rigid enough to absorb thrust from the fore and aft propeller, but soft enough to isolate transmission vibrations from the hull.

To help increase the longevity of the mounts, all parts in steel are zinc plated and pasivated to limit corrosion. . The rubber component is coated with an oil shield to protect it from petroleum-based products.

R&D Marine mounts are preloaded based on the combined weight of the engine and transmission to limit movement of the wordeur. For ease of installation, the brackets are height adjustable and the mounting holes in the base of the bracket are slotted.o assist with transmission alignment.

How to select (details required) :
1. Define the total weight of the engine and transmission.
2. Determine 60% of the total weight then divide by 2 to determine the capacity of each of the rear mounts (the mounts on the transmission side of the engine).
3. Determine 40% of the total weight then divide by 2 to determine the capacity of each of the front mounts (the mounts opposite the transmission side of the engine).
4. Determine the required stud diameter and bracket footprint.
5. Choose the most appropriate size mount for the weight per frame. When possible, choose the bracket closest to the middle of the weight range.

Example:
The weight of the motor is 480 lbs, the weight of the transmission is 110 lbs, footprintis 4", stud diameter is 5/8".
Total weight is 590 lbs.
590 x 0.6/2 = 177 lbs per rear bracket. Required brackets are 800-010
590 x 0.4/2 = 118 lbs per rear bracket. Required brackets are 800-037

Why R&D Marine Engine Mounts?

Designed for marine use, accepts propeller thrust and motor in both directions
Offers a fail-safe design
R&D marine mounts are height adjustable
Preloaded to reduce movement
Slot holes in base for easy alignment
Mounting types to suit all applications

What's more interesting and meaningful than outdoor water boating? This is a great solution to meet your boating needs. This product is ideal for use in all marine equipment.

Frequently Asked Questions (FAQ) about R&D Engine Mount with 6.85" Footprint - 5/8" Stud - 120 to 410 lb. Capacity per Mount (Yanmar***) Who is R&D Marine?
How to describe the R&D engine mount with 6.85" footprint - 5/8" stud - 120 to 410 lb capacity per mount (Yanmar***)?
Who is Marine R&D? It has always been considered essential that all products must be easy to use, be safe and above all be easily available at the right price. R & D Marine is proud to be able to supply or assemble from stock most products to cover urgent breakdowns. Thanks to the service provided, the suitability of the products and customer recommendations, it has been possible to develop the global distribution network that R & D Marine has today. How to describe the R&D Engine Mount with 6.85" Footprint - 5 /8" Stud - 120 to 410 lb Capacity per Mount (Yanmar***)? What could be more interesting ande more meaningful than sailing in open water? This is a great solution to meet your boating needs. This product is ideal for use in all marine equipment.

Save $44 on the purchase of the R&D motor mount with 6.85" footprint - 5/8" stud - 120 to 410 lb. capacity by support (Yanmar* **) for only $176 from NVN Marine! Same day dispatch before 3 p.m. R&D Engine Mount with 6.85" Footprint - 5/8" Stud - 120 to 410 lb. Capacity per Bracket (Yanmar***) Technical Specifications

Type:	Marine equipment \| Engine mounts
Supplier:	Marine R&D
Weight:	4.05 lbs
User Guide:	Download PDF
Product brochure:	Download PDF

R&D Engine Mount with 6.85" Footprint - 5/8" Stud - 120 to 410 lb. Capacity per Bracket (Yanmar***) User ReviewsR&D Motor Mount with 6.85" Footprint 6.85" - 5/8" Stud - 120 -410 lb Capacity per Bracket (Yanmar***) Shipping & Returns

Shipping Weight:	4.05 lbs
Box sizes:	4.00 (h) x 8 .00 (l) x 8.00 (l)
Cubic feet:	256.0
Returnable:	Yes

For For detailed shipping terms, please see our Shipping Policy and you can find our Return & Refund Policy here.