Sale!
Blue Sea 7622 ML Series Heavy Duty Automatic Load Relay
Blue Sea 7622 ML Series Heavy Duty Automatic Load Relay

Blue Sea 7622 ML Series Heavy Duty Automatic Load Relay

$81

SKU: Blue Sea 7622 ML Series Heavy Duty Automatic Load Relay
Category:

Blue Sea 7622 ML Series Heavy Duty Automatic Load Relay Electrical

The 500 amp magnetic latching (bi-stable) relay automatically combines the batteries during charging and isolates the batteries when discharging and when starting the engine.

Blue Sea 7622BSS Attributes
  • Operating voltage: 12 volts
  • Rated current: 500 A continuous/700 A intermittent
Blue Sea 7622BSS Features and benefits
  • Automatically manages the load of two large battery banks
  • Allows battery banks to be paralleled for emergency starting
  • Continuous 500 amp rating to support high efficiency alternators
  • Magnetic Latch (ML) - The ACR draws very low current in "ON" or "OFF" mode and draws moderate current for a very short time when changing state.
  • Dual Sensing - Detects the charge on both batteries
  • Isolation Start (SI) - Can be configured for temporary isolationHousehold loads from the motor circuit while the motor is starting to protect sensitive electronics.
  • Motor Isolation (EI) - Can be configured to isolate two motors while both are running to protect the electronics of the engine and maximize the output of the alternator. Load sensing on two battery banks.
  • LED output to remotely indicate when batteries are combined, isolated, in voltage lock or starting or cranking. Insulation
  • Tin-plated copper studs for maximum conductivity and corrosion resistance/Silver alloy contacts provide high reliability for active load switching
  • No warranty from supplier
Blue Sea 7622BSS Installation Instructions
  • 990180180-005.pdf

7622

Manual control: Yes
Coil voltage: 12 V

Features:
  • The manual control switch provides an additional level of safety allowing control with or without power, and providing "locked" capability for maintenance
  • Includes Contura ML Series PN 2146 remote control switch
  • 500 amps continuous
  • Magnetic Latch (ML)-ACR draws very high current low (<10 mA to monitors terminal voltage) in "ON" or "OFF" states and draws moderate current for a very short time when changing state.
  • Insulation Start (SI) - Can be configured for temporary home insulation. motor circuit loads during motor starting to protect sensitive electronics
  • Motor Isolation (EI) - Can be configured to isolate two motors while both are running to protect the motor's electronics engine and maximize alternator output
  • Detects the load on two battery banks
  • Supports high output alternators up to 500 amps
  • LED output to remotely indicate when batteries are combined, isolated, in lockout voltage, in starting or motor insulation
  • 3/8"-16 tinned copper studs for maximum conductivity and corrosion resistance
  • The 7/8" (22mm) stud length accepts multiple cable terminals
  • Label recesses for circuit protection
  • D-alloy contacts silver provide high reliability for switching live loads

This product can expose you to chemicals, including di (2-ethylhexyl) (dehp), known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to P65Warnings.ca.gov.



RelaysBlue Sea Systems ML series automatic charging provide a 500A magnetic latching (bistable) relay, which automatically fuses the batteries when charging and isolates the batteries when discharging and starting the engine. Magnetic latching (ML) relays draw very little current in the on state. Start-up isolation (SI) can be configured to temporarily isolate the household load from the motor circuit during motor starting to protect sensitive electronic equipment. Motor Isolation (EI) can be configured to isolate when two motors are operating simultaneously to protect the motor electronics and optimize alternator power. The manual override button provides greater safety, allows control when powered on or off, and has a "lockout" function for maintenance. The LED output can remotely indicate the status of the switch.Optional LED or remote controlled Contura switch with integrated LED is required. 3/8"-16 tin-plated copper studs provide maximum conductivity and corrosion resistance. 7/8" (22mm) stud length accommodates multiple cable terminals. One-piece stainless steel flange nuts ensure a secure and reliable connection. The notch on the label is used for circuit identification. Silver alloy contacts provide high reliability for live switches.
PRODUCT ID: 34967
SKU: NVN-34967
CSKU: CWR-34967
REWRITE: 46078-blue-sea -7622-ml-series- heavy duty automatic
MPN: 7622
UPC: 632085076221
ASIN: B001VIXLRO
WSKU: BSS7622
SSKU: BS-7622
KSKU: B6Z7622BSS
GSKU:
MSKU:
LSKU: 661-7622
NAME: Blue Sea 7622 ML-Series Heavy Duty Automatic Load Relay
EX_NAME: BLUE SEA 7622 ML ACR LOAD RELAY WITH 12V MANUAL OVERRIDE
br>PTITLE: Blue Sea 7622 ML SeriesHeavy DUseful automatic charging relay
TYPE: Electric | Battery Management
SELLER: Blue Sea Systems
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES

Blue Automatic Charging Relays Sea Systems (ACR)
Blue SEA 7622 ML Series Heavy Duty Load Relay with MAN CTR, Size: afd = none | amps - max = none | lockable = none |

Gtags:
Switch
Safety switch

GSpecs:

Blue Sea ML 7622 Series Heavy Duty Automatic Charging Relay Product Description

The 500 amp magnetic latching (bi-stable) relay automatically combines the batteries during charging and isolates the batteries when discharging and when starting the battery. motor.

Blue Sea 7622BSS Attributes
  • Operating voltage: 12 volts
  • Ampere rating: 500 A continuous/700 A intermittent
Blue Sea 7622BSS Features and benefits
  • Automatically manages the load of two large battery banks
  • Allows paralleling Battery banks for emergency starting
  • 500 amp continuous rating to support high output alternators
  • li>
  • Magnetic Latch (ML) - The ACR draws very low current in "ON" or "OFF" states and draws moderate current for a very short time when changing states.
  • Double dieprotection: detects the load on both battery banks
  • Start Isolation (SI) - Can be configured for temporary isolation. Household loads from the motor circuit during motor start to protect the sensitive electronics
  • Motor Isolation (EI) - Can be configured for isolation of two motors while both are operating to protect the motor electronics and maximize output detections of the alternator loading on Two Battery Banks
  • LED output to remotely indicate when batteries are combined, isolated, in voltage lockout or in start or motor isolation
  • Tinned copper studs for maximum Maximum conductivity and corrosion resistance/ Silver alloy contacts provide high reliability for active load switching
  • No supplier warranty
Installation instructions Blue Sea 7622BSS
  • 990180180-005.pdf

7622

Manual control: Yes
Coil voltage: 12v

Features:
  • Manual control switch provides an added level of safety allowing control with or without power and providing " locked" for maintenance
  • Includes MLContura Switch PN 2146 series remote control
  • Continuous current rating of 500 amps
  • The Magnetic Latch (ML)-ACR draws very low current (<10 mA to monitor terminal voltage) in the "ON" or "OFF" states and draws moderate current for a very short time when changing states .
  • Start Isolation (SI) - Can be configured for temporary isolation of household loads from the motor circuit during motor operation. startup to protect sensitive electronic components
  • Motor Isolation (EI) - Can be configured to isolate two motors pwhile both operate to protect the engine's electronics and maximize alternator output
  • Senses the charge on two battery banks
  • Supports Charges high output alternators up to 500A
  • LED output to remotely indicate when batteries are combined, isolated, in voltage lock, in start or engine isolation
  • 3/8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
  • 7/8" (22 mm) stud length accepts multiple cable terminations
  • Tag recesses for circuit protection
  • Silver alloy contacts provide high reliability for switching live loads

This product can expose you to chemicals including di(2-ethylhexyl) phthalate (dehp), which is recognized by the State of Californiaie causing cancer, birth defects, or other reproductive harm. For more information,



Blue Sea Systems ML Series Automatic Load Relays provide a 500 A magnetic latching (bistable) relay , which automatically merges the batteries when charging and isolates the batteries when discharging and starting the engine. Magnetic latching (ML) relays draw very little current in the on state. Start-up isolation (SI) can be configured to temporarily isolate the household load from the motor circuit during motor starting to protect sensitive electronic equipment. Engine Isolation (EI) can be configured to isolate when two motors are operating simultaneously to protect the motor electronics and maximize alternator output. The manual override button provides increased safety, allows forcontrols when powered on or off and has a "lockout" function for maintenance. The LED output can remotely indicate the status of the switch. Optional LED or remote controlled Contura switch with integrated LED is required. 3/8"-16 tin-plated copper studs provide maximum conductivity and corrosion resistance. 7/8" (22mm) stud length accommodates multiple cable terminals. One-piece stainless steel flange nuts ensure a secure and reliable connection. The notch on the label is used for circuit identification. Silver alloy contacts provide high reliability for live switches.

Blue Sea 7622 ML Series Heavy Duty Auto Load Relay Related ProductsBlue Sea 2146 ML Series Remote Controlled Contura Switch - ON-OFF-ON
Ancor Red 2/0 AWG Battery Cable - Sold By The Foot
Ancor Heavy Duty Terminals - 2/0 Gauge Wire - In3/8" stud - Pack of 2
Ancor red paste 3/0 AWGY cable - Sold by the foot
Ancor red battery cable 4/0 AWG - Sold by the foot
Ancor heavy duty terminals - 3/0 gauge wire - 3/8" post - Pack of 2
Ancor Heavy Duty Lugs - 4/0 gauge wire - 3/8" post - Pack of 2


Frequently Asked Questions (FAQ) about Blue Sea 7622 ML Series Heavy Duty Automatic Load Relay Who is Blue Sea Systems?
How to describe the Blue Sea 7622 ML Series Heavy Duty Automatic Load Relay?
What is Blue Sea Systems? is the warranty policy for Blue Sea Heavy Duty Automatic Load Relay 7622 ML Series
What is the operating voltage of the product?
What is the type of product?
What is the weight of the product? product?
What is the amperage rating of the product?
Is this product ISO approved?
What is the mounting hardware for the product and sold separately?
What is the policy product warranty?
Who is Blue Sea Systems Blue Sea Syst?emsis committed to the improvement of marine electrical products and systems, such as panel systems, circuit breakers, connectors and insulators. Blue Sea aims to satisfy its distributors, resellers and ultimately its retail customers by designing and manufacturing electrical products designed to withstand the rigors of the marine environment. How to describe the Blue Sea 7622 ML Series Heavy Duty Automatic Load Relay? Blue Sea Systems ML Series Automatic Charging Relays provide a 500A magnetic latching (bistable) relay, which automatically fuses batteries when charging and isolates batteries when discharging and of starting the engine. Magnetic latching (ML) relays draw very little current in the on state. Start-up isolation (SI) can be configured to temporarily isolate the household load from the motor circuit during motor starting to protect equipments sensitive electronics. Motor Isolation (EI) can be configured to isolate when two motors are operating simultaneously to protect the motor electronics and optimize alternator efficiency. The manual override button provides added safety, provides power on or off control, and has a "lockout" function for maintenance. The LED output can remotely indicate the status of the switch. Optional LED or remote controlled Contura switch with integrated LED is required. 3/8"-16 tin-plated copper studs provide maximum conductivity and corrosion resistance. 7/8" (22mm) stud length accommodates multiple cable terminals. One-piece stainless steel flange nuts ensure a secure and reliable connection. The notch on the label is used for circuit identification. Silver alloy contacts provide high reliability for switchess powered on. What is the warranty policy of Blue Sea 7622 ML Series Heavy Duty Automatic Load Relay? Lifespan
    • The ACR draws a very low current (<40 mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws a current moderate for a very short time when changing state
    • Allows two battery banks to be charged efficiently from a single charging source without external regulators or isolators
    • Rated voltage: 700 V
    • Motor isolation: Yes
    • Operating current: 13 mA
    • Operating current when changing state: <7, 0 A
    • Switching current under voltage: 300 A at 12 V DC
    • Continuous rating: 500 A
    • Intermittent rating: 700 A
    • Required wire size: 4/0 AWG
    • Terminal stud size: 3/8"
    • Weight: 04 lbs
    • Dual sensing; detects the load ins each battery bank
    • Approvals: Meets ISO 8846 and SAE J1171 external ignition protection requirements, CE marked, IP66 rated
    • Combine 30s: 5V
      • li>
    • Combine 90 sec: 0V
    • Open 10 sec: 35V
    • Open 30 sec: 75V
    • Open high: 2V
    • Start isolation or motor isolation allows selection of which bank to isolate during current peaks to protect sensitive electronic or motor control systems
    • Ignition protected; can be installed in engine rooms of gasoline-powered boats
    • Operated by remote switch; eliminates long, heavy-gauge cables
    • Remote switch (included) provides emergency combine function to start the engine or make a radio call Hand lever controls whether power remote switch has been compromised
    • The LED indicators onr switch indicate mode of operation
    • Can be easily connected to ML series battery switches using binding bus plates
    • Lifetime warranty
      • li>
    What is the operating voltage of the product? 12 V DC with manual controlWhat is the product type? Load relayWhat is the weight of the product? 2.06What is the amperage of the product? 700 amps at 12 volts DCI, is this product ISO approved? ISO 8846 and SAE J1171What is the mounting hardware of the product and sold separately? Mounting screws (sold separately)What is the warranty product policy? Lifetime Warranty

    Save $128when you purchase the Blue Sea 7622 ML Series Heavy Duty Automatic Load Relayfor only $204 from NVN Marine! Same day dispatch before 3 p.m. Blue Sea 7622 ML Series Heavy Duty Automatic Load Relay Videos Technical Specifications for the Blue Sea Series Heavy Duty Automatic Load RelayBlue Sea 7622 ML
    Type:

    Electric | Battery Management
    Vendor:

    Blue Sea Systems
    Weight:

    2.05 lbs
    Product Manual:

    Download PDF
    Blue Sea 7622 ML Series Heavy Duty Auto Load Relay User ReviewsBlue Sea 7622 ML Series Heavy Duty Auto Load Relay Shipping & return
    ShMaximum weight:

    2.05 lb
    Sizes of boxes:

    3.00 (h) x 7.00 (w) x 11.00 (w)
    Cubic feet:

    231.0
    Recordable:

    Yes
    P65:

    Yes

    For detailed shipping terms, please see our shipping policy and you can find our return and refund policyrsly here.

Related products