Blue Sea 7623100 ML ACR 24V 500A Load Relay with Manual Override and Deutsch Connector Electrical

ACR 7623100 ML 24V 500A Load Relay with Manual Override and Deutsch Connector

500A magnetic latching (bi-stable) relay automatically combines batteries during charging and isolates the batteries when discharging and when starting the engine.

Features:

The manual control switch provides an additional level of security allowing control with or without power and providing LOCK OFF capability for maintenance
Automatically manages the charging of two large battery banks
Allows paralleling battery banks for emergency starting
Continuous 500 amp rating to support high battery levels. output alternators
Magnetic Latch (ML): The ACR draws very low current (<40 mA to monitor terminal voltage) in the "ON" or "OFF" states, and draws current moderatefor a very short time when changing state
Dual Sensing: detects the charge on both batteries.
Isolation Start (SI) - can be configured to isolate temporarily loads the motor house. Circuit during motor start to protect sensitive electronics.
Motor Isolation (EI): Can be configured to isolate two motors while both are running in order to protect engine electronics and optimize alternator output.
Charging detections on two battery banks
LED output to remotely indicate when batteries are combined, insulated, voltage lock, or start or motor isolation
3/8"-16 tin plated Copper studs for maximum conductivity and corrosion resistance
Length 7/8" (22mm) stud accepts multiple cable terminals
Silver alloy contacts offprovide high reliability for switching live loads
Label recesses for circuit identification

Specifications:

Control circuit connection: Deutsch DTM
Rated voltage: 24 V DC
Manual control: Yes
Motor isolation: Yes
Mounting: #10
Starting assistance: Yes
li>
Starting insulation: Yes
Operating intensity : 13 mA
AChange of state operating current: <7.0 A
Terminal stud torque: 140 in-lb (15.82 Nm)
Continuous rating: 500 A
Intermittent rating: 700 A (5 min)
30 second start-up rating: 1450 A DC
Cable size to meet ratings: 2x (4/0)
Switching current under voltage: 300A @12VDC
Switching cycles: 100,000
Clearance of terminal ring diameter: 1.18" (29.97 mm)
LonTerminal Stud Size: 0.875" (22.23 mm)
Terminal Stud Size: 3/8" - 16 (M10)

7623100 ML ACR charging relay 24 V 500 A, with manual override and Deutsch connector Magnetic latch 500 A The relay (bistable) automatically assembles the battery during the charging process and isolates the battery during discharging and discharging.
ID PRODUCT: 81432
SKU: NVN-81432
CSKU: CWR-81432
REWRITE: 92543-blue-sea-7623100-ml-acr-charge-relay
MPN: 7623100
UPC: 632085762315
ASIN:
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU:
NAME: Blue Sea 76ACR 23 100 ML Load Relay 24 V 500 A with manual override and Deutsch connector
NAME_EX: BLUE SEA ACR 7623 100 ML LOAD RELAY WITH MANUAL
PTITLE: Blue Sea 7623 100 ML ACR 24 V 500 A load relay with manual override and Deutsch connector
br>TYPE: Electric | Battery Management
SELLER: Blue Sea Systems
VEHICULES AND PARTS> VEHICLE PARTS AND ACCESSORIES> WATERCRAFT PARTS AND ACCESSORIES

Gtags:

GSpecs:

Blue Sea 7623100 ML ACR Load relay 24 V 500 A with manual override and Deutsch connector Product description

7623100 ML ACR Load relay 24 V 500 A with manual override and Deutsch connector

500 A Magnetic latching (bi-stable) relay automatically combines batteries during charging and isolates batteries when discharging and when starting the engine.

Features:

Manual The control switch provides an added level of safety allowing control with or without power and providing LOCKOUT capability for maintenance.
Automatically manages the charging of two large battery banks
Allows paralleling of battery banks for emergency starting
500 continuous amps to support alternators at high efficiency
Magnetic Latch (ML): The ACR draws very low current (<40 mA to monitor thevoltage at the terminals) in the "ON" or "OFF" mode and draws a moderate current for a very short time when changing state.
Dual detection: detects the activated load of both battery banks
Start Isolation (SI) - can be configured to temporarily isolate house loads from the motor circuit during motor starting to protect sensitive electronic components
L Motor Isolation (EI) - can be configured to isolate two motors while both are operating to protect the motor electronics and maximize alternator output.
Senses the load on two banks of batteries
LED output to remotely indicate when batteries are combined, isolated, in voltage lockout or starting or motor isolation
3/8" tinned copper studs - 16 for maximum conductivity and corrosion resistance
7/8" (22mm) stud length accepte multiple cable terminals
Silver alloy contacts provide high reliability for switching active loads
Label recesses for circuit identification

Specifications:

Control circuit connection: Deutsch DTM
Rated voltage: 24 V DC
Manual control: Yes
Motor isolation: Yes
Mounting: #10
Starting aid: Yes
Startup Isolation: Yes
Operating Current: 13 mA
Operating Current on Change State: <7.0 A
Start Stud Torque terminal: 140 in-lb (15.82 Nm)
Continuous rating: 500 A
Intermittent rating: 700 A (5 min)
Starting rating in 30 seconds: 1450 A DC
Cable size to meet ratings: 2x (4/0)
Switching current under voltage: 300 A at 12 VDC
Switching cycles: 100,000
Terminal Ring Diameter Clearance: 1.18" (29.97 mm)
Terminal Stud Length: 0.875" (22.23 mm)
Terminal Stud Size: 3/8" - 16 (M10)

7623100 ML ACR Load Relay 24V 500A, with Hand Override and Deutsch Connector Magnetic Latching Relay (bistable) 500 A automatically assembles the battery during the charging process and isolates the battery during discharging and discharging

Frequently asked questions (FAQ) about of the Blue Sea 7623100 ML ACR 24 V. 500 A load relay with manual override and Deutsch connector Who is Blue Sea Systems?
How to describe the Blue Sea 7623100 ML ACR 24 V 500 A load relay with manual override and Deutsch connector?
Who is Blue Sea Systems? Blue Sea Systems is committed to improving Blue Sea marine electrical products and systems, such as panel systems, circuit breakers, connectors and insulators. sou aims to satisfy its distributors, resellers and ultimately its retail customers by designing and manufacturing electrical products designed to withstand the rigors of the marine environment. How to describe the Blue Sea 7623100 ML ACR 24 V 500 A load relay with manual override and Deutsch connector? 7623100 ML ACR 24V 500A Charging Relay, with Manual Override and Deutsch Connector The 500 Amp magnetic latching (bistable) relay automatically assembles the battery during the charging process and isolates the battery during discharging and discharging.

Save $98 when you purchase the Blue Sea 7ACR 623 100 ML 24V 500A Load Relay with Manual Override and Deutsch Connector for only $209 from NVN Marine! Same day dispatch before 3 p.m. Blue Sea 7623100 ML ACR 24 V 500 A load relay with manual override and Deutsch connector Technical specifications

Type :	Electric \| Battery Management
Vendor:	Blue Sea Systems
Weight:	2.05 lbs
Product installation:	Download PDF

Blue Sea 7623100 ML ACR Load relay 24 V 500 A with manual override and Deutsch connector User reviewsBlue Sea 7623 100 ML ACR 24V 500A Load Relay with Manual Override & Deutsch Connector Shipping & Returns

Shipping Weight:	2.05 lbs
Box sizes:	0.00 (h) x 0.00 (w) x 0.00 (w) )
Cubic feet:	0.0
Returnable:	Yes