Jabsco Impeller Kit 8 Blades Nitrile 2-9/16" Diameter Spline Drive Marine Plumbing & Ventilation

Impeller kit - 8 blades - Nitrile - 2-9/16" diameter - Splined drive

Material: Nitrile
Type drive: Single flat drive
Number of blades: 8
Dimensions:
Diameter: 2-9/ 16"
Shaft Width: 5/8"
Shaft Diameter: 2"
Insert Material:Brass

Jabsco flexible impellers can be installed on most makes and models of cooling, bilge, transfer and general purpose flexible impeller engine pumps in bronze.
Jabsco flexible turbines undergo rigorous quality processes to ensure long-lasting reliability, efficiency and durability. performance.

Replace all wheels at least once a year, or sooner, depending on engine function. When installed correctly, a wheel can last several years, but it is always advisable to follow a schedule.e preventative rather than corrective maintenance.

Replacing the wheels is easy. By removing the screws from the end cover, it is possible to remove the impeller using either a Jabsco turbine removal tool, or channel lock pliers, to grip the turbine hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the gasket and end cover, thepump is ready for use.

WARNING: This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings. ca.gov.

Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. Use nitrile impellers for pumping. bilge water and for...
PRODUCT ID: 50256
SKU: NVN-50256
CSKU: CWR-50256
REWRITE: 61367-jabsco-impeller-kit-8 -blade
MPN: 920-0003-P
UPC: 671880570862
ASIN: B000O89AEU
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU: 6-9200003P
NAME: Jabsco Impeller Kit - 8 Blades - Nitrile - 2-9/16" Diameter -Splined drive
NOM_EX: JABSCO NITRILE 8-blade impeller KIT 2 9/16 DIA> TYPE: Marine Plumbing & Ventilation | Turbines
SELLER: Jabsco
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Sports
Jabsco 920-0003-P, Nitrile, Drive Type 7, 8 Blades, 2-9/16 Diameter, 2 Width, 5/8 Shaft, Brass Insert
Jabsco Impeller Kit - 8 Blades - Nitrile - 2-9/16" diameter - Spline drive
Sports
Gtags:

Jabsco

GSpecs:

Jabsco Impeller Kit - 8 Blades - Nitrile - 2-9/16" Diameter - Spline Drive Product Description Turbine Kit - 8 Blades - Nitrile - 2-9/16" Diameter - Spline Drive

Material: Nitrile
Drive type: Single flat drive
Number of blades: 8
Dimensions:
Diameter: 2-9/16"
Shaft Width: 5/8"
Shaft diameter: 2"
Insert material: Brass

Jabsco flexible impellers can be installed on the Most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps. Jabsco flexible impellers undergo rigorous quality processes to ensure reliable, efficient performance. and durable.

Replace all impellers at least once a year, or sooner, depending on engine operation. When installed correctly, one.impeller can last several years, but it is always advisable to follow a preventive rather than corrective maintenance program.

Rep. lacing the turbines is easy. By removing the screws from the end cover, it is possible to remove the impeller using either a Jabsco impeller removal tool or channel lock pliers to grip the impeller hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller wheninitial priming. After replacing the seal and end cover, the pump is ready for use.

This product can expose you to chemicals, including LEAD, which are recognized by the State of California to cause cancer, birth defects or other reproductive harm. For more information,

Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. Use nitrile impellers for pumping bilge water and for...

Frequently Asked Questions (FAQ) about Jabsco Impeller Kit - 8 Blades - Nitrile - 2-9/ 16" Diameter - Spline Drive Who is the Jabsco?
How to describe the Jabsco Impeller Kit - 8 Blades - Nitrile - 2-9/16" Diameter - Spline Drive?
What is the type of product?
Who is Jabsco? Jabsco is oneof the world's leading manufacturers of products for the recreational marine market, including water systems, engine cooling pumps, floodlights and marine waste systems. Wherever a pump is needed on board a pleasure boat or small work boat, for engine cooling, bilge pumping, fresh or waste water treatment, Jabsco worldwide will provide top quality product. How to Describe Jabsco Impeller Kit, 8 Blades, Nitrile, 2-9/16" Diameter - Spline Drive? Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present . Use nitrile impellers for pumping bilge water and for... What is the product type?

Save $17 with the purchase of the Jabsco Impeller Kit - 8 blades - Nitrile - 2-9/16" diameter - Drive Spline for only $34 at NVN Marine! Same day dispatch before 3 p.m. Jabsco Impeller Kit - 8 Blades - Nitrile - 2-9/16" Diameter - Spline Drive Videos Jabsco Impeller Kit - 8 Blade - Nitrile - 2-9/16" Diameter - Spline Drive Technical Specifications

Type:	Marine Plumbing and Ventilation \| Wheels
Supplier:	Jabsco
Weight:	0.5 lbs

Jabsco Impeller Kit - 8 Blades - Nitrile - 2-9/ 16" Diameter - Spline Drive User ReviewsJabsco Impeller Kit - 8 Blades - Nitrile - 2-9/16" Diameter - Spline Drive Shipping & Returns

Shipping Weight:	0.5 lbs
Box sizes:	3.00 ( h) x 5.00 (l) x 8.00 (l)
Cubic feet:	120.0
Returnable:	Yes
USPS First Class:	Yes
P65:	Yes

For detailed shipping terms , please review our shipping policy and you can find our return and refund policy here.