Sale!
Jabsco Impeller Kit 9 Blades Neoprene 3-¾" Diameter
Jabsco Impeller Kit 9 Blades Neoprene 3-¾" Diameter

Jabsco Impeller Kit 9 Blades Neoprene 3-¾" Diameter

$20

SKU: Jabsco Impeller Kit 9 Blades Neoprene 3-¾" Diameter
Category:

Jabsco Impeller Kit 9 Blades Neoprene 3-¾" Diameter Marine Plumbing & Ventilation

Impeller kit

Material:Neoprene
Drive type:Spline drive
Number of blades: 9
Dimensions:
    • Diameter:3-3/4"
    • Shaft Width:1"
    • Shaft Diameter:2-1/2"

    Insert Material:Brass


    Jabsco flexible impellers can be installed on most makes and models of engine cooling pumps, bilge pumps, transfer and general purpose flexible bronze impeller.
    Jabsco flexible impellers undergo rigorous quality processes to ensure reliable, efficient and long-lasting performance.

    Replace all impellers
    /b> at least once a year, or sooner, depending on the function of the engine. When installed correctly a turbine can last several years, but it is always advisable to follow a preventative maintenance program instead. as corrective.

    The replacementRemoving the impellers is easy. By removing the end cover. screw, it is possible to remove the impeller using either a Jabsco IImpeller Removal Tool, or channel lock pliers, to grip the impeller hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

    Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

    Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the seal and end cover, the pump is ready for use.

    WARNING: This product can expose you to chemicals, including LEAD, which is known to the State of California to cause cause cancer, birth defects, or other reproductive harm. For more information, go to P65Warnings.ca.gov.



    Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. The acrylic impeller is used for bilge pumping and is used for...
    PRODUCT ID: 50245
    SKU: NVN-50245
    CSKU: CWR-50245
    REWRITE: 61356-jabsco- impeller-kit-9 -blade
    MPN: 836-0001-P
    UPC: 671880588225
    ASIN: B00GRZGX6C
    WSKU:
    SSKU:
    KSKU:
    GSKU:
    MSKU:
    LSKU: 6-8360001P
    NAME: Jabsco Impeller Kit - 9 Blades - Neoprene - 3-¾" Diameter
    NAME_EX: JABSCO NEOPRENE Impeller KIT 9 Blades 3 3/4 DIAX 2 1/2 w
    Type: Plumbing and ventilation Marines | Turbines
    Seller: Jabsco
    VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> POWERWATER PARTS & ACCESSORIES
    Personal Computer
    AmazonTitle: JABSCO Jabsco Impeller Kit - 9 blades - Neoprene - 3-¾" diameter / 836-0001-P /
    Jabsco Impeller Kit 836-0001-P
    Personal Computer
    Gtags:
    Jabsco

    GSpecs:

    • Jabsco Impeller Kit - 9 Blades - Neoprene - 3-¾" Diameter Product Description Impeller Kit

    Material:Neoprene
    Drive type: Spline drive
    Number of blades:9
    Dimensions:
    • Diameter:3-3/4"
    • Shaft Width:1"
    • L Diameter: Shaft:2-1/2 "

    Insert Material:Brass


    Flexible impellers Jabsco can be installed on most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
    Jabsco flexible impellers are subject to rigorous quality processes to ensure reliable, efficient and long-lasting performance.

    Replace all impellers at least once a year. year, or earlier, depending on engine function. When installed correctly, a wheel can last several years, but it is always recommendedlted to follow a preventive rather than corrective maintenance program.

    Replacing the impellers is easy. By removing the end cover screws, it is possible to remove the impeller using either a Jabsco turbine removal tool, or channel lock pliers, to grip the turbine hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

    Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

    Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the gasket andend cover, the pump is ready for use.

    This product can expose you to chemicals, including LEAD, which is known to the State of California to cause cancer, birth defects or other reproductive problems. For more information, go to P65Warnings.ca.gov.



    Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. The Acrylic Impeller is used for bilge pumping and is used for...

    Frequently Asked Questions (FAQ) about Jabsco Impeller Kit - 9 Blades - Neoprene - 3-¾" diameter Who is the Jabsco?
    How to describe the Jabsco turbine kit - 9 blades - Neoprene - 3-¾" diameter?
    Who is the Jabsco? Jabsco is one of the world's leading manufacturers of products for the recreational marine market, including water systems, pumpsengine cooling, searchlights and marine waste systems. Wherever a pump is needed on board a pleasure boat or small work boat, for engine cooling, bilge pumping, fresh or waste water treatment, Jabsco worldwide will provide top quality product. How to Describe Jabsco Impeller Kit - 9 Blades - Neoprene - 3-¾" Diameter? Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. The turbine in acrylic is used for bilge pumping and is used for...

    Save $25 when you purchase the Jabsco Impeller Kit - 9 Blades - Neoprene - 3-¾" Diameterfor only $50 from NVN Marine! Same day dispatch before 3 p.m. Jabsco turbine kit - 9 blades - Neoprene - 3-¾" diameter. Videos Jabsco turbine kit - 9 blades - Neoprene - 3. -¾" Specificationsdiameter techniques
    Type:

    Marine Plumbing and Ventilation | Wheels
    Supplier:

    Jabsco
    Weight:

    1.3 lbs
    Jabsco Impeller Kit - 9 Blades - Neoprene - 3-¾" in diameter User ReviewsJabsco Impeller Kit - 9 Blades - Neoprene - 3-¾" Diameter Shipping & Returns
    ShiWeight:

    1.3 lb
    Box sizes:

    5.00 (h) x 6.00 (w) x 10.00 (l)
    Cubic feet:

    300.0
    Recordable:

    Yes
    P65:

    Yes

    For detailed shipping terms, please see our shipping policy and you can find our return and refund policy here.

    • Related products