Jabsco Impeller Kit - 9 Blades - Nitrile - 3-3/4" Diameter x 2-1/2" Width 1" Shaft Diameter Marine Plumbing & Ventilation

Impeller kit - 9 blades - Nitrile - 3-3/4" diameter x 2-1/2" wide, 1" shaft diameter

Features:

Material: Nitrile
Drive Type: Single Flat Drive
Number of Blades: 9
Dimensions: Diameter: 3-3/4", Shaft Diameter: 1", Shaft Width: 2-1/2"
Insert Material: Brass

Jabsco flexible impellers can be installed on most makes and models of engine cooling, bilge, transfer pumps and general purpose flexible bronze impeller.
Jabsco flexible impellers undergo rigorous quality processes to ensure high reliability and efficiency. and long-lasting performance.

Replace all wheels at least once a year, or sooner, depending on engine function. When installed correctly, a wheel can last several years, but it is alwaysWe are advised to adhere to a preventative rather than corrective maintenance program.

Replacing the impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Jabsco turbine removal tool or channel lock pliers to grip the turbine hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it gives extra protection to the impeller when initial priming. After replacing the janointed and the end cover, the pump is ready for use.

This product can expose you to chemicals including LEAD, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For information, go to P65Warnings.ca.gov.

Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. The acrylic impeller is used for bilge pumping and is used for...
PRODUCT ID: 50246
SKU: NVN-50246
CSKU: CWR-50246
REWRITE: 61357-jabsco- impeller-kit-9 -blade
MPN: 836-0003-P
UPC: 671880591898
ASIN: B000O8F6I4
WSKU:
SSKU:
KSKU:
GSKU:
MSKU:
LSKU: 6-8360003P
NAME: Jabsco Impeller Kit- 9 blades - Nitrile - 3-3/4" diameter x 2-1/2" width, 1" shaft diameter
NAME_EX: JABSCO NITRILE 9 BLADES TURBINE KIT 3 3/4 DIA X 2 1/2 W
PTITLE: Jabsco Impeller Kit - 9 Blades - Nitrile - 3-3/4" Diameter x 2-1/2" Width, 1" Shaft Diameter
TYPE: Plumbing and marine ventilation | Wheels
SELLER: Jabsco
VEHICLES & PARTS> VEHICLE PARTS & ACCESSORIES> WATERCRAFT PARTS & ACCESSORIES
Sports
Jabsco 836-0003-P, Nitrile, Type Drive 7, Blade 9, Diameter 3-3/4, Width 2-1/2, 1 Shaft, Brass Insert
Jabsco Impeller Kit - 9 Blades - Nitrile - 3-3/4" diameter x 2-1/2" width, 1" shaft diameter
Sports
Gtags:

Jabsco

GSpecs:

Jabsco Impeller Kit - 9 Blades - Nitrile - 3-3/4" Diameter x 2-1/2" Width, 1" Shaft Diameter Product Description Impeller Kit - 9 Blades - Nitrile - 3-3/4" diameter x 2-1/2" wide, 1" shaft diameter

Features:

Material: Nitrile
Drive type: Single flat drive
Number of blades: 9
Dimensions : Diameter: 3-3/4", Shaft Diameter: 1", Shaft Width: 2-1/2"
Insert Material: Brass

Jabsco flexible impellers can be installed on most makes and models of bronze flexible impeller engine cooling, bilge, transfer and general purpose pumps.
Jabsco flexible impellers undergo rigorous quality processes to ensure reliable, efficient and long-lasting performance.

Replace all impellers at least annually, or sooner , depending on the fooperation of the engine. When the installation is correct, a turbine can last several years, but it is always advisable to follow a prevention program, corrective, maintenance.

Replacing turbines is easy. By removing the end cover screws, it is possible to remove the impeller using a Jabsco impeller removal tool or channel lock. pliers, to grip the wheel hub. Do not use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always have spare impellers on board in emergency case.The turbine is one of the most essential components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly, it givese additional protection to the wheel during initial priming. After replacing the seal and end cover, the pump is ready for use.

This product can expose you to chemicals, including LEAD, which are recognized by the State of California as causing cancer, birth defects or other reproductive harm. For more information,

Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. The Acrylic Impeller is used for bilge pumping and used for...

Frequently Asked Questions (FAQ) about Jabsco Impeller Kit - 9 Blades - Nitrile - 3-3/4" diameter x 2-1/2" W, 1" shaft diameter Who is Jabsco? How to Describe Jabsco Impeller Kit - 9 Blades - Nitrile - 3-3/4" Diameter x 2 -1/2" wide, 1" shaft diameter?
What is the type of product?
Who is Jabsco? Jabsco is a leading global manufacturer of products for the recreational marine market, including water systems, engine cooling pumps, floodlights and marine waste systems. Wherever a pump is needed on board a pleasure boat or small work boat, for engine cooling, bilge pumping, fresh or waste water treatment, Jabsco worldwide will supply it.top quality product.How to Describe Jabsco Impeller Kit - 9 Blades - Nitrile - 3-3/4" Diameter x 2-1/2" Wide, 1" Diameter Shaft? Neoprene is the most commonly used material and is suitable for occasions where only a small amount of engine oil or diesel is present. Acrylic impeller is used for bilge pumping and used for...What is the. product type?>Save $25 when purchasing the KiJabsco Impeller - 9 Blades - Nitrile - 3-3/4" Diameter x 2-1/2" Wide, 1" Shaft Diameterfor only $50 from NVN Marine! Same day dispatch before 3pm Jabsco Impeller Kit - 9 Blades - Nitrile - 3-3/4" Diameter x 2-1/2" Width, Shaft Diameter 1" /2" W, 1" Shaft Diameter Technical Specifications

Type:	Marine Plumbing and Ventilation \| Wheels
Supplier:	Jabsco
Weight:	1.0 lbs

Jabsco Impeller Kit - 9 Blades - Nitrile - 3-3/ 4" diameter x 2-1/2" wide, 1" shaft diameter User ReviewsJabsco Impeller Kit - 9 blades - Nitrile - 3-3/4" diameter x 2-1/2" wide, 1" Shaft Diameter Shipping & Returns

Shipping Weight:	1.0 lbs
Box sizes:	5.00 (h) x 6.00 (w) x 10.00 (w)
Cubic feet:	300.0
Recordable:	Yes
P65:	Yes